In order to remove the actuator effects from your view of how the software 
processing results change when you alter a setting, look at WG% instead of 
boost.


----- Original Message ----- 
From: "Rob Ebersol" <[email protected]>
To: "Ray Ayala" <[email protected]>
Sent: Thursday, March 05, 2009 7:43 PM
Subject: Re: Link EBC questions


>I had a much longer email planned until I went out this last time. I  can't 
>find any logic reveal from changing the settings. Raising WGsns  seems to 
>do little to nothing. Raising the WGbase from 98kpa to  110kpa got me 
>another 1psi peak at 15, but when I moved up to 115kpa  base I lost 2psi at 
>peak.
>
> I'm sure the EBC can be tuned (based on the fact that it works 
> mechanically with an mbc), but the window on this actuator is too  narrow 
> for me (my time). I can manage the cam timing tune this  weekend with the 
> mbc. But there is no substitute for close loop EBC IMO.
>
> Thanks for the reply. - rob
>
>
> On Mar 5, 2009, at 7:40 PM, Ray Ayala wrote:
>
>> If it's set too low the target will never be reached.  If it's set  too 
>> high there will be a lot of overshoot with most boost  controllers but 
>> probably not with that funky one you've been  playing with.
>>
>>
>> ----- Original Message ----- From: "Rob Ebersol"  <[email protected]>
>> To: "MiataPower Power Miata" <[email protected]>
>> Sent: Thursday, March 05, 2009 2:37 PM
>> Subject: Link EBC questions
>>
>>
>>>
>>> Is WGsns only for attaining boost target?
>>>
>>> Can WGbase control whether or not boost target is reached?
>>>
>>> _______________________________________________
>>> Miatapower mailing list
>>> [email protected]
>>> http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
>>
> 

_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower

Reply via email to