Thanks for that explanation- it gives me enough insight to actually  
attempt messing with it again. But I got an offer for another free  
actuator yesterday at a dyno day - one that's normal - the guy just  
wants to try out both of his and makes his choice, leaving me the one  
he doesn't want.



On Mar 7, 2009, at 11:10 AM, Ray Ayala wrote:

> Ignoring spoolup-assist, WGbase tells the ECU how much boost (above  
> atmospheric pressure) it should expect see from just the actuator  
> and with no solenoid mediation at all.  The ECU attempts to assist  
> in making up the difference between WGbase and the target boost  
> while avoiding overshooting the target.  So if  WGbase is set up as  
> high as the target level then ECU thinks it doesn't need to do  
> anything at all.  When WGbase is lower than the target then WGsens  
> is used as a scale factor in calculating WG%.   When WGbase and  
> WGsens are set correctly then boost should rise to the target by  
> the time rpm reaches WGrpm.  Once boost does reach the target (+/-  
> 15kPa) then the ECU will start tracking ... i.e. it stops  
> calculating WG% based on WGbase and WGsens and instead begins  
> applying corrections to the current WG% value  in an attempt to  
> keep the boost as close as possible to the target. But whenever  
> boost is more than 15kPa higher or lower than the target then the  
> ECU reverts to the simpler WG%=WGsens*[(target-WGbase)/WGbase]  
> calculation.  Keep in mind that WGbase is atmospheric pressure +  
> actuator pressure so it will change as atmospheric pressure  
> changes.  The keypad displays the sum but the map entry contains  
> only the actuator pressure. This is a rather simplistic model that  
> assumes the actuator pressure remains fairly constant as a function  
> of engine rpm and it relies on the tracking mode to regulate boost  
> when that's not really true.  The +/- gain control zones control  
> how much correction the ECU applies to WG% in tracking mode when  
> boost wanders away from the target.  Your log looks better than I  
> was expecting for that funky actuator!

_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower

Reply via email to