I will be using A Hydra ECU firing them sequentually rather than batch. I 
think Jeremy has the dwell settings figured out for them already. New stock 
LS1 coils I have found for $46 each. the needed connectors seem to be about 
$20 each. Also need custom plug wires. I figured by the time I went to all 
the expense I might as well get the MSD ones for the multi spark capability 
which is built into the coils.

Bob


----- Original Message ----- 
From: "Eric Schieb" <[email protected]>
To: "Rob Ebersol" <[email protected]>
Cc: "Miatapower Miata Power" <[email protected]>
Sent: Saturday, May 02, 2009 7:22 AM
Subject: Re: MSD LS1/LS6 Coils?


> You simply need to make sure that your dwell is short enough that you do
> not excessively duty cycle them and burn them up.  They will charge
> quick enough.
>
> You would not be the first person to do something like this.  ;-)
>
> When considering any LS coil, you will need to make sure that you're
> dwell can be appropriate for the coil.  If you're dwell is longer than
> what the coil wants, it will fire whether you want it to or not.
>
> When I am approached with a blank sheet kind of project, I now recommend
> the Mercury Marine style coils instead of the GM kind.  The Mercury
> Marine style coils do not have the protection circuitry built in.
>
> Eric Schieb
>
> Rob Ebersol wrote:
>> Any thoughts on using these COPs in the wasted spark circuit vs. the
>> intended circuit? and firing them at a much higher frequency? It
>> seems both of those environments would be outside of the intended/
>> design OE. MSD has high powered wasted spark coils for the mitsu unit
>> that comes on the Miata - same as the earlier eclipse/talon and some
>> chryslers (like the srt4). This is what ISC has apparently moved to
>> (and is now selling) for Miata race applications.
>>
>>
>>
>> On May 1, 2009, at 9:39 AM, Eric Schieb wrote:
>>
>>
>>> Depending on your goals that price still seems high.
>>>
>>> I probably have 10 or 12 LS2 truck coils (used). If you do the
>>> research,
>>> these coils have an excellent reputation (even compared to LS1
>>> etc). Per
>>> memory, new price each was under the price you list.
>>>
>>> Eric Schieb
>>> Electron Speed
>>>
>>> Bob Bundy wrote:
>>>
>>>> Anybody interested in splitting the cost of a set of 8. I only
>>>> need 4 for a Miata The part cost difference in buying 8 is huge.
>>>>
>>>> $104.95 each or $645.95 for a set of 8 from Summit or Jegs.
>>>>
>>>> Bob
>>>>
>>>> --------------------------------------------------------------------- 
>>>> ---
>>>>
>>>> _______________________________________________
>>>> Miatapower mailing list
>>>> [email protected]
>>>> http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
>>>>
>>>>
>>> _______________________________________________
>>> Miatapower mailing list
>>> [email protected]
>>> http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
>>>
>>
>> _______________________________________________
>> Miatapower mailing list
>> [email protected]
>> http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
>>
>>
>
> _______________________________________________
> Miatapower mailing list
> [email protected]
> http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower 

_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower

Reply via email to