Thanks Sam, I'm 90% sure its a mk2 , will double check in the next hour. On Tue, May 3, 2011 at 7:51 PM, Sam Sharp <[email protected]> wrote:
> Is it a Mk 1 Link or a Mk 2? The procedure is different. Do not cut the > trace if it is a Mk 1. The narrow band O2 sensor won't be used. There are > instructions on the FM site depending on the wideband you're using. Again, > if you have a Mk 1 Link the wiring will be different. I can help with this > when I get home and can look at how I did it, with much help from Bill > Cardell. > > Sam > > > On Tue, May 3, 2011 at 12:30 PM, Stephen Rigley <[email protected]> wrote: > >> Hi All, >> >> With 90-93 link ECU's, when you install a WideBand (+ cut the trace on the >> PCB), which pin does one now wire the NarrowBand signal to? >> >> Many thanks, >> Steve >> >> _______________________________________________ >> Miatapower mailing list >> [email protected] >> http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower >> >> >
_______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
