Yep, its a mk2, Thanks On Tue, May 3, 2011 at 8:01 PM, Stephen Rigley <[email protected]> wrote:
> Thanks Sam, I'm 90% sure its a mk2 , will double check in the next hour. > > > On Tue, May 3, 2011 at 7:51 PM, Sam Sharp <[email protected]> wrote: > >> Is it a Mk 1 Link or a Mk 2? The procedure is different. Do not cut the >> trace if it is a Mk 1. The narrow band O2 sensor won't be used. There are >> instructions on the FM site depending on the wideband you're using. Again, >> if you have a Mk 1 Link the wiring will be different. I can help with this >> when I get home and can look at how I did it, with much help from Bill >> Cardell. >> >> Sam >> >> >> On Tue, May 3, 2011 at 12:30 PM, Stephen Rigley <[email protected]>wrote: >> >>> Hi All, >>> >>> With 90-93 link ECU's, when you install a WideBand (+ cut the trace on >>> the PCB), which pin does one now wire the NarrowBand signal to? >>> >>> Many thanks, >>> Steve >>> >>> _______________________________________________ >>> Miatapower mailing list >>> [email protected] >>> http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower >>> >>> >> >
_______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
