Did you leave the diagnostic plug in the harness? Wealth of helpful info when you plug in a cheap tester, from trouble codes to live sensor data.
Bill Cardell TurboDog's Dad Www.flyinmiata.com 1-800-fly-mx5s 970-464-5600 On Jun 13, 2011, at 5:12 PM, "fast G" <[email protected]> wrote: > I have a 2002 Miata engine/trans in a Lotus 7 clone. It runs and drives > perfectly, but suffer from some sort of heat soak issue. It will run fine, is > you switch it off and they restart it within seconds your OK. But if you > leave it for 5 mins it will not restart. If you take the hood off and let it > cool down it with re-start perfectly. I have replaced the cam position sensor > on the top of the engine on the back of the inlet cam. But it made no > difference. I added a fan controller so I could get the fan to run on after > switching the engine off, but it did not really help. So maybe I just have to > swap sensors until I find the right one. But what logic can I use to try and > decide were to start. > > Thanks > > Graham > _______________________________________________ > Miatapower mailing list > [email protected] > http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower _______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
