Hi GWater, nothing happens loading the driver with the option jpeg=1. I repost the output of dmesg after trying to play the stream with mplayer
159.019736] Linux video capture interface: v2.00 [ 236.326861] usbcore: registered new interface driver sn9c20x [ 236.327777] sn9c20x: SN9C20x USB 2.0 Webcam Driver v2009.01 loaded [ 323.552113] usb 1-2: new full speed USB device using uhci_hcd and address 3 [ 323.751809] usb 1-2: configuration #1 chosen from 1 choice [ 323.756894] sn9c20x: SN9C20X USB 2.0 Webcam - 0C45:6270 plugged-in. [ 323.844584] sn9c20x: I2C slave 0x5d returned error during write to address 0xff [ 324.014569] sn9c20x: Detected MT9V111 Sensor. [ 324.023316] sn9c20x: Webcam device 0C45:6270 is now controlling video device /dev/video0 [ 324.163545] sn9c20x: Using yuv420 output format [ 339.126064] sn9c20x: Using jpeg output format [ 339.574674] sn9c20x: isoc_init() submit_urb 0 failed with error -28 [ 339.574698] sn9c20x: isoc_init() submit_urb 1 failed with error -28 [ 339.574702] sn9c20x: isoc_init() submit_urb 2 failed with error -28 [ 339.574706] sn9c20x: isoc_init() submit_urb 3 failed with error -28 [ 339.574709] sn9c20x: isoc_init() submit_urb 4 failed with error -28 [ 339.574713] sn9c20x: isoc_init() submit_urb 5 failed with error -28 [ 339.574716] sn9c20x: isoc_init() submit_urb 6 failed with error -28 [ 339.574720] sn9c20x: isoc_init() submit_urb 7 failed with error -28 [ 339.574723] sn9c20x: isoc_init() submit_urb 8 failed with error -28 [ 339.574727] sn9c20x: isoc_init() submit_urb 9 failed with error -28 [ 354.584521] sn9c20x: [E] Empty buffer queue. Any suggestion? I looked for the inf file, by I didn't find it on the windows driver. I opened the cam, but there wasn't the part numer on the cmos sensor. So I cannot say if it's really the MT9V111 model. Thanks. Bye Marco > > Try loading the module with: > # insmod sn9c20x.ko jpeg=1 > > GWater > > signature.asc > < 1KViewDownload --~--~---------~--~----~------------~-------~--~----~ Lets make microdia webcams plug'n play, (currently plug'n pray) To post to this group, send email to [email protected] Visit us online https://groups.google.com/group/microdia -~----------~----~----~----~------~----~------~--~---
