Butch's list scrubs all attachments and provides a link at the bottom to
retrieve the attachment.
I did use the same text for all lists and forums.
-----
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
--------------------------------------------------
From: "Josh Luthman" <j...@imaginenetworksllc.com>
Sent: Thursday, December 18, 2008 11:11 AM
To: "Mikrotik discussions" <mikrotik@mail.butchevans.com>
Subject: Re: [Mikrotik] Mikrotik MPLS issue
Note there is no attached image...
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
Those who don't understand UNIX are condemned to reinvent it, poorly.
--- Henry Spencer
On Thu, Dec 18, 2008 at 12:04 PM, Mike Hammett
<butch-mikro...@ics-il.net>wrote:
*bump*
-----
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
--------------------------------------------------
From: "Mike Hammett" <butch-mikro...@ics-il.net>
Sent: Tuesday, December 16, 2008 10:36 AM
To: "Mikrotik discussions" <mikrotik@mail.butchevans.com>
Subject: [Mikrotik] Mikrotik MPLS issue
I have attached a map of the test network. It is the ring in the lower
right corner.
One out of 5 routers I setup with MPLS doesn't respond to Winbox well
after enabled. I can ping it, I can telnet into it, but I can't Winbox
into
it. Once I disable MPLS, all is well. Below is the MPLS export for the
failing router. To the best of my knowledge I followed the directions
on
the wiki.
[ad...@hammettfarms] > /mpls export
# jan/01/1970 00:21:07 by RouterOS 3.17
# software id = EDV4-LTT
#
/mpls
set dynamic-label-range=16-1048575
/mpls interface
add comment="" disabled=no interface=all mpls-mtu=1508
/mpls ldp
set distribute-for-default-route=no enabled=no hop-limit=255
loop-detect=no lsr-id=10.1.255.3 path-vector-limit=255
transport-address=10.1.255.3 use-explicit-null=no
/mpls ldp interface
add accept-dynamic-neighbors=yes comment="" disabled=no
hello-interval=5s
hold-time=15s interface="South PPPoE" transport-address=0.0.0.0
add accept-dynamic-neighbors=yes comment="" disabled=no
hello-interval=5s
hold-time=15s interface="ICS Private" transport-address=0.0.0.0
/mpls ldp neighbor
add comment="" disabled=no send-targeted=no transport=10.1.255.2
add comment="" disabled=no send-targeted=no transport=10.1.255.5
-----
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <
http://www.butchevans.com/pipermail/mikrotik/attachments/20081216/c5ba2509/attachment.html
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Test network.pdf
Type: application/pdf
Size: 97657 bytes
Desc: not available
URL: <
http://www.butchevans.com/pipermail/mikrotik/attachments/20081216/c5ba2509/attachment.pdf
>
_______________________________________________
Mikrotik mailing list
Mikrotik@mail.butchevans.com
http://www.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik
RouterOS
_______________________________________________
Mikrotik mailing list
Mikrotik@mail.butchevans.com
http://www.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik
RouterOS
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://www.butchevans.com/pipermail/mikrotik/attachments/20081218/6067971d/attachment.html>
_______________________________________________
Mikrotik mailing list
Mikrotik@mail.butchevans.com
http://www.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik
RouterOS
_______________________________________________
Mikrotik mailing list
Mikrotik@mail.butchevans.com
http://www.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS