-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
After noodling over this for a couple of days I thought somebody from the group might have seen this. MT Router1 - UBNT Bullet L1(5.xGhz) UBNT Bullet - MT Router2 Then UBNT Bullet L2( 5.xGhz ) UBNT Bullet - MT Router3. L1 MT to MT runs at approx 25mb/s TCP when tested MT to MT. L2 MT to MT runs at approx 40mb/s TCP when tested MT to MT L1 AND L2 can be tested at the same time to separate MT routers between the legs and both run at full speed. ( no interference between 5Ghz segments ) BUT when I test through L1 through L2 from MT1 to MT3 throughput falls to 10mb/s All MT's are running OSPF And I can run a separate path around Leg2 ( Leg 3 to Leg 4 that then connects to MT3 ) and get ~20mb/s from MT1 to MT3. ( Leg 3 runs at 20mb/s ) Any ideas? -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org/ iQEcBAEBAgAGBQJOVk9cAAoJEC+8HUjSuDOseScH/jduOQLXih+ioOL32FMdUpjp 4X7KxOfNpf9U0XRmeaxEdrrYi8zmAQr4dwR9K4bTPyeEn8nG6C74ohLClO8NzlJg t0TD51NG26sJlrI62WxK0PkPBZivjmERLnRCuQK7Sk2Y3PNdc6q8ZN7JdxYr6+/U 4rftdfEczQwHw3IVPT4hiFGBNDWWr9WcCe9Pt4QTVMbw+dt7usJhWlo13UXF49Nd gAlxxpf+k7Cmz81LXfiy0uVwCC1kj/GovOltgUrCmgLU1WnMRI1wHI6nNrUly+S7 ZVQp2rtt9nr9nOy4z5dXcvof/FgibwvgZyEJblEPpeq2vOak+dqyfmUbU1GLSjI= =YOjv -----END PGP SIGNATURE----- _______________________________________________ Mikrotik mailing list Mikrotik@mail.butchevans.com http://www.butchevans.com/mailman/listinfo/mikrotik Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
