This is regarding the mimedefang-2.67 port on FreeBSD 7.1
The problem leaves this evidence in /var/log/maillog
Nov 7 23:45:30 phantom mimedefang-multiplexor[936]: Starting slave 1 (pid
1238) (1 running): Bringing slaves up to minSlaves (2)
Nov 7 23:45:30 phantom mimedefang-multiplexor[936]: Slave 1 stderr: Out of
memory during request for 4088 bytes, total sbrk() is 9553920 bytes!
Nov 7 23:45:30 phantom mimedefang-multiplexor[936]: Slave 1 stderr: Out of
memory during request for 48 bytes, total sbrk() is 9553920 bytes!
Nov 7 23:45:30 phantom mimedefang-multiplexor[936]: Reap: slave 1 (pid 1238)
exited due to signal 11 (SLAVE DIED UNEXPECTEDLY)
Nov 7 23:45:30 phantom mimedefang-multiplexor[936]: Slave 1 resource usage:
req=0, scans=0, user=0.092, sys=0.056, nswap=0, majflt=0, minflt=3101,
maxrss=13432, bi=5, bo=18
Nov 7 23:45:33 phantom mimedefang-multiplexor[936]: Starting slave 1 (pid
1246) (1 running): Bringing slaves up to minSlaves (2)
Nov 7 23:45:33 phantom mimedefang-multiplexor[936]: Slave 1 stderr: Out of
memory during request for 4088 bytes, total sbrk() is 9553920 bytes!
Nov 7 23:45:33 phantom mimedefang-multiplexor[936]: Slave 1 stderr: Out of
memory during request for 48 bytes, total sbrk() is 9553920 bytes!
Nov 7 23:45:33 phantom mimedefang-multiplexor[936]: Reap: slave 1 (pid 1246)
exited due to signal 11 (SLAVE DIED UNEXPECTEDLY)
Nov 7 23:45:33 phantom mimedefang-multiplexor[936]: Slave 1 resource usage:
req=0, scans=0, user=0.096, sys=0.051, nswap=0, majflt=0, minflt=3101,
maxrss=13356, bi=5, bo=18
This sounds similar to an old problem I read about, and it took a long
time for the port to get upgraded, so I haven't mentioned it until now,
since I just recently upgraded. I thought 2.67 might fix the issue.
The solution had been to do a "mimedefang.sh stop", wait around five
seconds, then do a "mimedefang.sh start". A restart didn't cut it.
The delay didn't seem to be an issue after the update, so that problem
might be solved, but the real issue is mimedefang not ramping up on
reboot.
I'm guessing something is trying to start before something else is ready,
but I'm pretty clueless past that.
Any suggestions?
Jeffrey Moskot
System Administrator
j...@math.miami.edu
_______________________________________________
NOTE: If there is a disclaimer or other legal boilerplate in the above
message, it is NULL AND VOID. You may ignore it.
Visit http://www.mimedefang.org and http://www.roaringpenguin.com
MIMEDefang mailing list MIMEDefang@lists.roaringpenguin.com
http://lists.roaringpenguin.com/mailman/listinfo/mimedefang
