Alexandre Ratchov wrote: > On Wed, Aug 24, 2005 at 10:37:46AM +0200, Ramiro Aceves wrote: > >>First, thank you very much for your interesting responses. >> >>Yesterday in the evening I installed OpenBSD again on the same disk, >>just to be sure if I could reproduce the errors. Yes!, I did not have to >>wait for a long time. The errors appeared after some hours of use. I >>installed the ports tree and run the locate.updateb command, just for >>moving disk heads. Also added some audio files just to fill the disk space. >> >>Yesterday night, there were only two corrupted files, inmediately after >>the install: >>/usr/libdata/perl5/AnyDBM_File.pm and >>/usr/libdata/perl5/Attribute >>That files disapeared: >> >>wd1(pciide0:0:1): timeout >> type: ata >> c_bcount: 2048 >> c_skip: 0 >>pciide0:0:1: bus-master DMA error: missing interrupt, status=0x61 >>wd1a: device timeout reading fsbn 1489200 of 1489200-1489203 (wd1 bn >>1489263; cn 1477 tn 7 sn 6), retrying >>wd1: soft error (corrected) >>wd1(pciide0:0:1): timeout >> type: ata >> c_bcount: 2048 >> c_skip: 0 >>pciide0:0:1: bus-master DMA error: missing interrupt, status=0x61 > > > hello, > > are you using a slow disk and a fast disk on the same cable? i remembrer > that i experienced similar problems when i tried to put a slow 1.6G togother > with a fast 40Go disk on the same cable. > > are you using a 80-conductor cable ? >
Yes!, I am using a 40 GB (aprox 4 years old) as master, and 1GB (around 10) as slave. Cable is 40-conductor, I think. Both at the same cable. Thanks Ramiro.
