On Wed, Feb 16, 2011 at 06:05:59PM +0800, shweg...@gmail.com wrote: > I have an external usb drive which freezes the system, especially if > I do some cp of scp of big files, but not necessarily, it happens > also with small files, here is the error I get: > > attempting to restore vector in use vecproc 0 veccpu 6boff0 > attempting to restore vector in use vecproc 0 veccpu 6boff0 > (yes, written to times) > umass0: Invalid CSW: sig 0x40f00ee0 shuld be 0x53425355
Please try a -current snapshot. Many, many USB fixes since Aug. and it would be good to know if the problem still exists as 4.9 is about to lock. .... Ken > > This is my dmesg: > > [ using 454796 bytes of bsd ELF symbol table ] > console out [ATY,RockHopper2_A]console in [] , no keyboard attached, > trying usb anyway > using parent ATY,RockHopper2Paren:: memaddr 98000000 size 8000000, : > consaddr 9c008000, : ioaddr 90020000, size 20000: memtag 8000, iotag > 8000: width 640 linebytes 768 height 480 depth 8 > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > Copyright (c) 1995-2010 OpenBSD. All rights reserved. > http://www.OpenBSD.org > > OpenBSD 4.8 (GENERIC) #95: Mon Aug 16 09:13:15 MDT 2010 > dera...@macppc.openbsd.org:/usr/src/sys/arch/macppc/compile/GENERIC > real mem = 1073741824 (1024MB) > avail mem = 1032704000 (984MB) > mainbus0 at root: model PowerMac10,1 > cpu0 at mainbus0: 7447A (Revision 0x102): 1249 MHz: 512KB L2 cache > mem0 at mainbus0 > spdmem0 at mem0: 1GB DDR SDRAM non-parity PC3200CL3.0 > memc0 at mainbus0: uni-n > "hw-clock" at memc0 not configured > kiic0 at memc0 offset 0xf8001000 > iic0 at kiic0 > mpcpcibr0 at mainbus0 pci: uni-north, Revision 0xff > pci0 at mpcpcibr0 bus 0 > pchb0 at pci0 dev 11 function 0 "Apple UniNorth AGP" rev 0x00 > vgafb0 at pci0 dev 16 function 0 "ATI Radeon 9200" rev 0x01, mmio > wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation) > mpcpcibr1 at mainbus0 pci: uni-north, Revision 0x5 > pci1 at mpcpcibr1 bus 0 > pchb1 at pci1 dev 11 function 0 "Apple UniNorth PCI" rev 0x00 > macobio0 at pci1 dev 23 function 0 "Apple Intrepid" rev 0x00 > openpic0 at macobio0 offset 0x40000: version 0x4614 little endian > macgpio0 at macobio0 offset 0x50 > "modem-reset" at macgpio0 offset 0x1d not configured > "modem-power" at macgpio0 offset 0x1c not configured > macgpio1 at macgpio0 offset 0x9 irq 47 > pgs0 at macgpio0 offset 0x11: irq 55 > "gpio5" at macgpio0 offset 0x6f not configured > "gpio6" at macgpio0 offset 0x70 not configured > "extint-gpio15" at macgpio0 offset 0x67 not configured > "escc-legacy" at macobio0 offset 0x12000 not configured > zsc0 at macobio0 offset 0x13000: irq 22,23 > zstty0 at zsc0 channel 0 > zstty1 at zsc0 channel 1 > aoa0 at macobio0 offset 0x10000: irq 30,1,2 > audio0 at aoa0 > "timer" at macobio0 offset 0x15000 not configured > adb0 at macobio0 offset 0x16000 irq 25: via-pmu, 0 targets > apm0 at adb0: battery flags 0x0, 0% charged > piic0 at adb0 > iic1 at piic0 > maxtmp0 at iic1 addr 0xc8: max6642 > kiic1 at macobio0 offset 0x18000 > iic2 at kiic1 > wdc0 at macobio0 offset 0x20000 irq 24: DMA > ohci0 at pci1 dev 24 function 0 "Apple Intrepid USB" rev 0x00: irq > 0, version 1.0, legacy support > ohci1 at pci1 dev 25 function 0 "Apple Intrepid USB" rev 0x00: irq > 0, version 1.0, legacy support > ohci2 at pci1 dev 26 function 0 "Apple Intrepid USB" rev 0x00: irq > 29, version 1.0, legacy support > ohci3 at pci1 dev 27 function 0 "NEC USB" rev 0x43: irq 63, version 1.0 > ohci4 at pci1 dev 27 function 1 "NEC USB" rev 0x43: irq 63, version 1.0 > ehci0 at pci1 dev 27 function 2 "NEC USB" rev 0x04: irq 63 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "NEC EHCI root hub" rev 2.00/1.00 addr 1 > usb1 at ohci0: USB revision 1.0 > uhub1 at usb1 "Apple OHCI root hub" rev 1.00/1.00 addr 1 > usb2 at ohci1: USB revision 1.0 > uhub2 at usb2 "Apple OHCI root hub" rev 1.00/1.00 addr 1 > usb3 at ohci2: USB revision 1.0 > uhub3 at usb3 "Apple OHCI root hub" rev 1.00/1.00 addr 1 > usb4 at ohci3: USB revision 1.0 > uhub4 at usb4 "NEC OHCI root hub" rev 1.00/1.00 addr 1 > usb5 at ohci4: USB revision 1.0 > uhub5 at usb5 "NEC OHCI root hub" rev 1.00/1.00 addr 1 > mpcpcibr2 at mainbus0 pci: uni-north, Revision 0x6 > pci2 at mpcpcibr2 bus 0 > pchb2 at pci2 dev 11 function 0 "Apple UniNorth PCI" rev 0x00 > kauaiata0 at pci2 dev 13 function 0 "Apple Intrepid ATA" rev 0x00 > wdc1 at kauaiata0 irq 39: DMA > wd0 at wdc1 channel 0 drive 0: <SAMSUNG HM160HC> > wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors > atapiscsi0 at wdc1 channel 0 drive 1 > scsibus0 at atapiscsi0: 2 targets > cd0 at scsibus0 targ 0 lun 0: <MATSHITA, CD-RW CW-8124, DACD> ATAPI > 5/cdrom removable > wd0(wdc1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 > cd0(wdc1:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 > "Apple UniNorth Firewire" rev 0x81 at pci2 dev 14 function 0 not > configured > gem0 at pci2 dev 15 function 0 "Apple Uni-N2 GMAC" rev 0x80: irq 41, > address 00:0d:93:5e:38:10 > bmtphy0 at gem0 phy 0: BCM5221 100baseTX PHY, rev. 4 > umass0 at uhub0 port 1 configuration 1 interface 0 "Western Digital > My Book" rev 2.00/1.75 addr 2 > umass0: using SCSI over Bulk-Only > scsibus1 at umass0: 2 targets, initiator 0 > sd0 at scsibus1 targ 1 lun 0: <WD, 10EAVS External, 1.75> SCSI2 > 0/direct fixed > sd0: 953869MB, 512 bytes/sec, 1953525168 sec total > softraid0 at root > bootpath: /pci@f4000000/ata-6@d/disk@0:/bsd > root on wd0a swap on wd0b dump on wd0b > WARNING: / was not properly unmounted > > tks
