On Feb 27 21:42:13, Stuart Henderson wrote: > On 2011-02-27, Jan Stary <h...@stare.cz> wrote: > > I have been using www.pcengines.ch/alix2c1.htm > > as my home router for years. It is runnig current/i386. > > > > Now that I have bought me that Android, I also want wifi. > > The ALIX has a MiniPCI slot. Can people recommend a MiniPCI > > wifi card that works well for an AP, preferably tried in the ALIX? > > > > (I have read the recent threads considering obsd as an AP, > > but haven't come to a conclusion about which card to use.) > > > > If you want to do this with OpenBSD, athn(4) is probably the first > choice, Mikrotik R52n-M is probably the most easily available MiniPCI > card, SparkLan also have one.
On Feb 28 08:11:14, OSN | Marian Fischer wrote: > i tested some wifi MiniPCI cards together with an ALIX2xx board. > The best choice for me was an athn chipset. > athn0: AR9280 rev 2 (2T2R), ROM rev 21, On Feb 28 10:25:13, David Coppa wrote: > >From my experiences, > 1) athn > 2) ral On Feb 28 07:19:52, Russell wrote: > ath0 at pci0 dev 12 function 0 "Atheros AR2413" rev 0x01: irq 9 > ath0: AR2413 7.8 phy 4.5 rf 5.6, FCC2A*, address 00:80:48:7e:13:be > ath1 at pci0 dev 14 function 0 "Atheros AR2413" rev 0x01: irq 11 > ath1: AR2413 7.8 phy 4.5 rf 5.6, FCC2A*, address 00:80:48:7e:14:36 > > ral0 at cardbus0 dev 0 function 0 "Ralink RT2560" rev 0x01: irq 12,> address > 00:0e:3b:08:45:41 > ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525 So, what would a cheap bastard do? Buy the cheapest obsd-supported MiniPCI wifi card on ebay, obviously. So I did (for about $9): ral0 at pci0 dev 12 function 0 "Ralink RT2560" rev 0x01: irq 9, address 00:11:09:0d:d3:36 ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525 Works well, apart from an occasional ral0: device timeout I like it when OpenBSD puts old crap to work. Thank you! Anyway, the signal is a bit weak. When I place my Andriod right beside the ALIX on my desk, it works OK; on the other side of the desk, various services occasionally time out. So I probably need to replace it with something that has an external antena. Or has anyone used a MiniPCI wifi card that is strong enough to cover a room without an external antena? Thanks Jan OpenBSD 4.8-current (GENERIC) #0: Sun Dec 19 10:23:12 CET 2010 r...@gw.stare.cz:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Geode(TM) Integrated Processor by AMD PCS ("AuthenticAMD" 586-class) 432 MHz cpu0: FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX real mem = 133791744 (127MB) avail mem = 121593856 (115MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 12/10/07, BIOS32 rev. 0 @ 0xfceb2 pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000 pcibios0: pcibios_get_intr_routing - function not supported pcibios0: PCI IRQ Routing information unavailable. pcibios0: PCI bus #0 is the last bus bios0: ROM list: 0xe0000/0xa800 cpu0 at mainbus0: (uniprocessor) pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 1 function 0 "AMD Geode LX" rev 0x31 glxsb0 at pci0 dev 1 function 2 "AMD Geode LX Crypto" rev 0x00: RNG AES vr0 at pci0 dev 9 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 10, address 00:0d:b9:12:9f:2c ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063, model 0x0034 vr1 at pci0 dev 10 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 11, address 00:0d:b9:12:9f:2d ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063, model 0x0034 vr2 at pci0 dev 11 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 12, address 00:0d:b9:12:9f:2e ukphy2 at vr2 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063, model 0x0034 ral0 at pci0 dev 12 function 0 "Ralink RT2560" rev 0x01: irq 9, address 00:11:09:0d:d3:36 ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525 glxpcib0 at pci0 dev 15 function 0 "AMD CS5536 ISA" rev 0x03: rev 3, 32-bit 3579545Hz timer, watchdog, gpio gpio0 at glxpcib0: 32 pins pciide0 at pci0 dev 15 function 2 "AMD CS5536 IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: <CF CARD 4GB> wd0: 1-sector PIO, LBA, 3871MB, 7928928 sectors wd0(pciide0:0:0): using PIO mode 4, DMA mode 2 pciide0: channel 1 ignored (disabled) ohci0 at pci0 dev 15 function 4 "AMD CS5536 USB" rev 0x02: irq 15, version 1.0, legacy support ehci0 at pci0 dev 15 function 5 "AMD CS5536 USB" rev 0x02: irq 15 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "AMD EHCI root hub" rev 2.00/1.00 addr 1 isa0 at glxpcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com0: console pcppi0 at isa0 port 0x61 spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 usb1 at ohci0: USB revision 1.0 uhub1 at usb1 "AMD OHCI root hub" rev 1.00/1.00 addr 1 biomask e1ef netmask ffef ttymask ffff mtrr: K6-family MTRR support (2 registers) nvram: invalid checksum vscsi0 at root scsibus0 at vscsi0: 256 targets softraid0 at root root on wd0a swap on wd0b dump on wd0b clock: unknown CMOS layout ral0: device timeout