On Sat, May 14, 2011 at 03:43:23AM -0500, Abel Abraham Camarillo Ojeda wrote:
> > (( If you read this far, have a cookie
> > and wonder with me about that quick extraction...
> > The system this drive is in has the same board,
> > but everything else is slower and not idle when meassured...))
>
> I'm starting to get angry about the _horrible_ performance on this drive
> (WD10EARS-00Y), some developer ever got a chance to see something about
> this?
4.8 and newer should install on the disk fine (when reinitialzing the
disk), respecting 4k boundaries. Alas, if your disk has been
installed using an older version, the boundaries probably won't align.
Updating won't be enough because it keep the old mbr and disklabel.
-Otto
>
> The original message is at:
>
> http://marc.info/?l=openbsd-tech&m=126281899324219&w=2
>
> (I wasn't subscribed to this list back then)
>
> Thanks.
>
> OpenBSD 4.9-current (kobj) #0: Sun May 1 14:32:33 CDT 2011
> root@maetel.00z:/usr/kobj
> real mem = 1608056832 (1533MB)
> avail mem = 1551196160 (1479MB)
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xfd400 (50 entries)
> bios0: vendor American Megatrends Inc. version "V1.3" date 11/15/2010
> bios0: MSI MS-7623
> acpi0 at bios0: rev 0
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP APIC MCFG OEMB SRAT HPET SSDT
> acpi0: wakeup devices PCE2(S4) PCE3(S4) PCE4(S4) PCE5(S4) PCE6(S4)
> PCE7(S4) PCE9(S4) PCEA(S4) PCEB(S4) PCEC(S4) SBAZ(S4) PSKE(S4)
> PSMS(S4) ECIR(S4) PS2K(S3) PS2M(S3) P0PC(S4) UHC1(S4) UHC2(S4)
> UHC3(S4) USB4(S4) UHC5(S4) UHC6(S4) UHC7(S4) PWRB(S3)
> acpitimer0 at acpi0: 3579545 Hz, 32 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: AMD Phenom(tm) II X4 955 Processor, 3200.77 MHz
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
> cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
> 64b/line 16-way L2 cache
> cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
> cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
> cpu0: apic clock running at 200MHz
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: AMD Phenom(tm) II X4 955 Processor, 3200.16 MHz
> cpu1:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
> cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
> 64b/line 16-way L2 cache
> cpu1: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
> cpu1: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
> cpu2 at mainbus0: apid 2 (application processor)
> cpu2: AMD Phenom(tm) II X4 955 Processor, 3200.15 MHz
> cpu2:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
> cpu2: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
> 64b/line 16-way L2 cache
> cpu2: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
> cpu2: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
> cpu3 at mainbus0: apid 3 (application processor)
> cpu3: AMD Phenom(tm) II X4 955 Processor, 3200.16 MHz
> cpu3:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
> cpu3: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
> 64b/line 16-way L2 cache
> cpu3: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
> cpu3: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
> ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins
> acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
> acpihpet0 at acpi0: 14318180 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 1 (P0P1)
> acpiprt2 at acpi0: bus -1 (PCE2)
> acpiprt3 at acpi0: bus -1 (PCE3)
> acpiprt4 at acpi0: bus -1 (PCE4)
> acpiprt5 at acpi0: bus 2 (PCE5)
> acpiprt6 at acpi0: bus -1 (PCE6)
> acpiprt7 at acpi0: bus -1 (PCE7)
> acpiprt8 at acpi0: bus -1 (PCE9)
> acpiprt9 at acpi0: bus -1 (PCEA)
> acpiprt10 at acpi0: bus -1 (PCEB)
> acpiprt11 at acpi0: bus -1 (PCEC)
> acpiprt12 at acpi0: bus 3 (P0PC)
> acpicpu0 at acpi0: PSS
> acpicpu1 at acpi0: PSS
> acpicpu2 at acpi0: PSS
> acpicpu3 at acpi0: PSS
> acpibtn0 at acpi0: PWRB
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "AMD RS780 Host" rev 0x00
> ppb0 at pci0 dev 1 function 0 "AMD RS780 PCIE" rev 0x00
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 5 function 0 vendor "ATI", unknown product 0x9616 rev 0x00
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> ppb1 at pci0 dev 5 function 0 "AMD RS780 PCIE" rev 0x00: apic 4 int 17
> pci2 at ppb1 bus 2
> alc0 at pci2 dev 0 function 0 "Attansic Technology L1C" rev 0xc0: apic
> 4 int 17, address 6c:62:6d:de:03:76
> atphy0 at alc0 phy 0: F1 10/100/1000 PHY, rev. 11
> ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 4 int
> 22, AHCI 1.1
> scsibus0 at ahci0: 32 targets
> sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD5000AAJS-2, 01.0> SCSI3
> 0/direct fixed naa.50014ee10176d64c
> sd0: 476940MB, 512 bytes/sec, 976773168 sec total
> sd1 at scsibus0 targ 1 lun 0: <ATA, WDC WD10EARS-00Y, 80.0> SCSI3
> 0/direct fixed naa.50014ee05735bde1
> sd1: 953869MB, 512 bytes/sec, 1953525168 sec total
> ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 4 int
> 16, version 1.0, legacy support
> ohci1 at pci0 dev 18 function 1 "ATI SB700 USB" rev 0x00: apic 4 int
> 16, version 1.0, legacy support
> ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
> ohci2 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 4 int
> 18, version 1.0, legacy support
> ohci3 at pci0 dev 19 function 1 "ATI SB700 USB" rev 0x00: apic 4 int
> 18, version 1.0, legacy support
> ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 19
> usb1 at ehci1: USB revision 2.0
> uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1
> piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x3c: SMI
> iic0 at piixpm0
> spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600
> pciide0 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x00: DMA,
> channel 0 configured to compatibility, channel 1 configured to
> compatibility
> atapiscsi0 at pciide0 channel 0 drive 1
> scsibus1 at atapiscsi0: 2 targets
> cd0 at scsibus1 targ 0 lun 0: <PIONEER, DVD-RW DVR-116D, 1.08> ATAPI
> 5/cdrom removable
> cd0(pciide0:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4
> azalia0 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x00: apic 4 int 16
> azalia0: codecs: VIA/0x0397
> audio0 at azalia0
> pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x00
> ppb2 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00
> pci3 at ppb2 bus 3
> re0 at pci3 dev 2 function 0 "Realtek 8169" rev 0x10: RTL8169/8110SB
> (0x1000), apic 4 int 20, address 00:08:54:a6:be:f6
> rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 3
> ohci4 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 4 int
> 18, version 1.0, legacy support
> pchb1 at pci0 dev 24 function 0 "AMD AMD64 10h HyperTransport" rev 0x00
> pchb2 at pci0 dev 24 function 1 "AMD AMD64 10h Address Map" rev 0x00
> pchb3 at pci0 dev 24 function 2 "AMD AMD64 10h DRAM Cfg" rev 0x00
> km0 at pci0 dev 24 function 3 "AMD AMD64 10h Misc Cfg" rev 0x00
> pchb4 at pci0 dev 24 function 4 "AMD AMD64 10h Link Cfg" rev 0x00
> usb2 at ohci0: USB revision 1.0
> uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1
> usb3 at ohci1: USB revision 1.0
> uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
> usb4 at ohci2: USB revision 1.0
> uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1
> usb5 at ohci3: USB revision 1.0
> uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com0: probed fifo depth: 15 bytes
> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> com1: probed fifo depth: 15 bytes
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> usb6 at ohci4: USB revision 1.0
> uhub6 at usb6 "ATI OHCI root hub" rev 1.00/1.00 addr 1
> mtrr: Pentium Pro MTRR support
> uhidev0 at uhub3 port 2 configuration 1 interface 0 "Logitech Logitech
> USB Keyboard" rev 2.00/60.00 addr 2
> uhidev0: iclass 3/1
> ukbd0 at uhidev0: 8 modifier keys, 6 key codes
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev1 at uhub3 port 2 configuration 1 interface 1 "Logitech Logitech
> USB Keyboard" rev 2.00/60.00 addr 2
> uhidev1: iclass 3/0, 4 report ids
> uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
> uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
> uhidev2 at uhub3 port 3 configuration 1 interface 0 "Microsoft Basic
> Optical Mouse" rev 1.10/0.00 addr 3
> uhidev2: iclass 3/1
> ums0 at uhidev2: 3 buttons, Z dir
> wsmouse0 at ums0 mux 0
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> root on sd0a swap on sd0b dump on sd0b
> alc0: watchdog timeout
> alc0: watchdog timeout
> alc0: watchdog timeout
> alc0: watchdog timeout
> alc0: watchdog timeout
