I booted OBSD 4.8 on this motherboard and I have the same error:
can be this error related with BUG as described on man page of re driver ?
Regards,
2011/7/7 R0me0 *** <knight....@gmail.com>
> Allright, I disabled bge0 on BIOS SETUP but the error continues:
>
>
> pciide0 at pci2 dev 0 function 0 "Marvell 88SE6101 IDE" rev 0xb2: DMA
> (unsupported), channel 0 configured to native-PCI, channel 1
> configured to native-PCI
>
>
>
>
> 2011/7/7 Zeb Packard <zeb.pack...@gmail.com>
>
>> *Sorry about the direct response Nick. :0
>>
>> These two lines make me think it's a configuration problem.
>>
>> bge0 at pci7 dev 0 function 0 "Broadcom BCM57788" rev 0x01, BCM57780
>> A1 (0x57780001): apic 0 int 17 (irq 10), address 00:22:4d:4c:40:ee
>> brgphy0 at bge0 phy 1: BCM57780 10/100/1000baseT PHY, rev. 1
>>
>>
>>
>>
>> Dmesg below.
>>
>> penBSD 4.9 (GENERIC.MP) #794: Wed Mar 2 07:19:02 MST 2011
>> dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
>> cpu0: Pentium(R) Dual-Core CPU E5700 @ 3.00GHz ("GenuineIntel" 686-class)
>> 3 GHz
>> cpu0:
>> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,XSAVE
>> real mem = 2135498752 (2036MB)
>> avail mem = 2090401792 (1993MB)
>> mainbus0 at root
>> bios0 at mainbus0: AT/286+ BIOS, date 05/10/10, SMBIOS rev. 2.6 @
>> 0xe9230 (58 entries)
>> bios0: vendor Intel Corp. version "RKG4310H.86A.0082.2010.0510.1954"
>> date 05/10/2010
>> bios0: Intel Corporation DP43BF
>> acpi0 at bios0: rev 2
>> acpi0: sleep states S0 S1 S3 S4 S5
>> acpi0: tables DSDT FACP APIC MCFG HPET
>> acpi0: wakeup devices P0P1(S3) PS2K(S4) PS2M(S4) UAR1(S3) P0P2(S4)
>> USB0(S3) USB1(S3) USB2(S3) USB5(S3) USB6(S3) EUSB(S3) USB3(S3)
>> USB4(S3) USBE(S3) PEX0(S4) PEX1(S4) PEX2(S4) PEX3(S4) PEX4(S4)
>> PEX5(S4) SLPB(S4) PWRB(S3)
>> acpitimer0 at acpi0: 3579545 Hz, 24 bits
>> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
>> cpu0 at mainbus0: apid 0 (boot processor)
>> cpu0: apic clock running at 199MHz
>> cpu1 at mainbus0: apid 1 (application processor)
>> cpu1: Pentium(R) Dual-Core CPU E5700 @ 3.00GHz ("GenuineIntel" 686-class)
>> 3 GHz
>> cpu1:
>> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,XSAVE
>> ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
>> acpimcfg0 at acpi0 addr 0xf0000000, bus 0-127
>> acpihpet0 at acpi0: 14318179 Hz
>> acpiprt0 at acpi0: bus 0 (PCI0)
>> acpiprt1 at acpi0: bus 32 (P0P2)
>> acpiprt2 at acpi0: bus 2 (PEX0)
>> acpiprt3 at acpi0: bus 3 (PEX1)
>> acpiprt4 at acpi0: bus 4 (PEX2)
>> acpiprt5 at acpi0: bus 5 (PEX3)
>> acpiprt6 at acpi0: bus 6 (PEX4)
>> acpiprt7 at acpi0: bus 7 (PEX5)
>> acpicpu0 at acpi0:, C3, C2, C1, PSS
>> acpicpu1 at acpi0:, C3, C2, C1, PSS
>> acpibtn0 at acpi0: SLPB
>> acpibtn1 at acpi0: PWRB
>> bios0: ROM list: 0xc0000/0xe600! 0xce800/0x400 0xcf000/0x2400
>> cpu0: Enhanced SpeedStep 2993 MHz: speeds: 3000, 2800, 2600, 2400,
>> 2200, 2000, 1800, 1600, 1400, 1200 MHz
>> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
>> pchb0 at pci0 dev 0 function 0 "Intel G45 Host" rev 0x03
>> ppb0 at pci0 dev 1 function 0 "Intel G45 PCIE" rev 0x03: apic 0 int 16
>> (irq 11)
>> pci1 at ppb0 bus 1
>> vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x10c3 rev
>> 0xa2
>> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
>> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
>> azalia0 at pci1 dev 0 function 1 vendor "NVIDIA", unknown product
>> 0x0be3 rev 0xa1: apic 0 int 17 (irq 10)
>> azalia0: no supported codecs
>> azalia0: initialization failure, detaching
>> uhci0 at pci0 dev 26 function 0 "Intel 82801JI USB" rev 0x00: apic 0
>> int 16 (irq 11)
>> uhci1 at pci0 dev 26 function 1 "Intel 82801JI USB" rev 0x00: apic 0
>> int 21 (irq 5)
>> uhci2 at pci0 dev 26 function 2 "Intel 82801JI USB" rev 0x00: apic 0
>> int 18 (irq 3)
>> ehci0 at pci0 dev 26 function 7 "Intel 82801JI USB" rev 0x00: apic 0
>> int 18 (irq 3)
>> ehci0: timed out waiting for BIOS
>> usb0 at ehci0: USB revision 2.0
>> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
>> azalia1 at pci0 dev 27 function 0 "Intel 82801JI HD Audio" rev 0x00:
>> apic 0 int 22 (irq 7)
>> azalia1: codecs: Realtek ALC888
>> audio0 at azalia1
>> ppb1 at pci0 dev 28 function 0 "Intel 82801JI PCIE" rev 0x00: apic 0
>> int 17 (irq 10)
>> pci2 at ppb1 bus 2
>> pciide0 at pci2 dev 0 function 0 "Marvell 88SE6101 IDE" rev 0xb2: DMA
>> (unsupported), channel 0 configured to native-PCI, channel 1
>> configured to native-PCI
>> pciide0: using apic 0 int 16 (irq 11) for native-PCI interrupt
>> pciide0: channel 0 ignored (not responding; disabled or no drives?)
>> pciide0: channel 1 ignored (not responding; disabled or no drives?)
>> ppb2 at pci0 dev 28 function 1 "Intel 82801JI PCIE" rev 0x00: apic 0
>> int 16 (irq 11)
>> pci3 at ppb2 bus 3
>> ppb3 at pci0 dev 28 function 2 "Intel 82801JI PCIE" rev 0x00: apic 0
>> int 18 (irq 3)
>> pci4 at ppb3 bus 4
>> ppb4 at pci0 dev 28 function 3 "Intel 82801JI PCIE" rev 0x00: apic 0
>> int 19 (irq 11)
>> pci5 at ppb4 bus 5
>> ppb5 at pci0 dev 28 function 4 "Intel 82801JI PCIE" rev 0x00: apic 0
>> int 17 (irq 10)
>> pci6 at ppb5 bus 6
>> vendor "VIA", unknown product 0x3403 (class serial bus subclass
>> Firewire, rev 0x00) at pci6 dev 0 function 0 not configured
>> ppb6 at pci0 dev 28 function 5 "Intel 82801JI PCIE" rev 0x00: apic 0
>> int 16 (irq 11)
>> pci7 at ppb6 bus 7
>> bge0 at pci7 dev 0 function 0 "Broadcom BCM57788" rev 0x01, BCM57780
>> A1 (0x57780001): apic 0 int 17 (irq 10), address 00:22:4d:4c:40:ee
>> brgphy0 at bge0 phy 1: BCM57780 10/100/1000baseT PHY, rev. 1
>> uhci3 at pci0 dev 29 function 0 "Intel 82801JI USB" rev 0x00: apic 0
>> int 23 (irq 10)
>> uhci4 at pci0 dev 29 function 1 "Intel 82801JI USB" rev 0x00: apic 0
>> int 19 (irq 11)
>> uhci5 at pci0 dev 29 function 2 "Intel 82801JI USB" rev 0x00: apic 0
>> int 18 (irq 3)
>> ehci1 at pci0 dev 29 function 7 "Intel 82801JI USB" rev 0x00: apic 0
>> int 23 (irq 10)
>> ehci1: timed out waiting for BIOS
>> usb1 at ehci1: USB revision 2.0
>> uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
>> ppb7 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x90
>> pci8 at ppb7 bus 32
>> pcib0 at pci0 dev 31 function 0 "Intel 82801JIR LPC" rev 0x00
>> pciide1 at pci0 dev 31 function 2 "Intel 82801JI SATA" rev 0x00: DMA,
>> channel 0 configured to native-PCI, channel 1 configured to native-PCI
>> pciide1: using apic 0 int 19 (irq 11) for native-PCI interrupt
>> wd0 at pciide1 channel 0 drive 0: <SAMSUNG HD502HJ>
>> wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
>> wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
>> ichiic0 at pci0 dev 31 function 3 "Intel 82801JI SMBus" rev 0x00: apic
>> 0 int 18 (irq 3)
>> iic0 at ichiic0
>> spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600
>> pciide2 at pci0 dev 31 function 5 "Intel 82801JI SATA" rev 0x00: DMA,
>> channel 0 wired to native-PCI, channel 1 wired to native-PCI
>> pciide2: using apic 0 int 19 (irq 11) for native-PCI interrupt
>> usb2 at uhci0: USB revision 1.0
>> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> usb3 at uhci1: USB revision 1.0
>> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> usb4 at uhci2: USB revision 1.0
>> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> usb5 at uhci3: USB revision 1.0
>> uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> usb6 at uhci4: USB revision 1.0
>> uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> usb7 at uhci5: USB revision 1.0
>> uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> isa0 at pcib0
>> isadma0 at isa0
>> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
>> pckbc0 at isa0 port 0x60/5
>> pckbd0 at pckbc0 (kbd slot)
>> pckbc0: using irq 1 for kbd slot
>> wskbd0 at pckbd0: console keyboard, using wsdisplay0
>> pcppi0 at isa0 port 0x61
>> spkr0 at pcppi0
>> it0 at isa0 port 0x2e/2: IT8721F rev 1, EC port 0xa00
>> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
>> mtrr: Pentium Pro MTRR support
>> vscsi0 at root
>> scsibus0 at vscsi0: 256 targets
>> softraid0 at root
>> root on wd0a swap on wd0b dump on wd0b
