On Thu, Oct 27, 2005 at 08:12:43AM -0700, [EMAIL PROTECTED] wrote: > Hello, I am trying to get OpenBSD 3.8 running on a > stock HP Proliant DL-320 server (bge network, SATA > drives, no floppy, no cd, P4, 1G RAM, HP iLo) with the > HP 8 Internal Port SAS Host Bus Adapter with RAID > (link: > http://h18004.www1.hp.com/products/...-hba/index.html > > > HP part number: 347786-B21 > > The chipset is LSI SAS 1068, and according to LSI, > supported with the mpt driver. Here is the link to > LSI's information: > > http://www.lsilogic.com/products/sas_ics/lsisas1068.html Where do you see it is supported on the OpenBSD website?
> When I try to install OBSD 3.8 (via USB CDROM Drive > with cd38.iso downloaded from current), I get to the > "Proceed with Install", then "no disks found." I > realize that the hardware isnt currently supported, > but was wondering if anyone would want to take a > crack at adding support for this to the mpt driver > (assuming it isnt already being worked on). I am > willing to test, or do whatever I can to help, I just > can't write code (especially drivers), because I dont > know how to. I was able to get network connectivity, > so I wrote my dmesg output to a file, and sent it to > myself. Here it is: > > OpenBSD 3.8-current (RAMDISK_CD) #853: Tue Oct 25 > 23:25:14 MDT 2005 > > [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD > cpu0: Intel(R) Pentium(R) 4 CPU 3.40GHz > ("GenuineIntel" 686-class) 3.40 GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,CNXT-ID > real mem = 1073270784 (1048116K) > avail mem = 973828096 (951004K) > using 4278 buffers containing 53768192 bytes (52508K) > of memory > mainbus0 (root) > bios0 at mainbus0: AT/286+(00) BIOS, date 12/31/99, > BIOS32 rev. 0 @ 0xf0000 > pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000 > pcibios0: PCI BIOS has 6 Interrupt Routing table > entries > pcibios0: PCI Interrupt Router at 000:31:0 ("Intel > 82801FB LPC" rev 0x00) > pcibios0: PCI bus #5 is the last bus > bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4800 > 0xcc800/0x1600 0xee000/0x2000! > cpu0 at mainbus0 > pci0 at mainbus0 bus 0: configuration mode 1 (no bios) > pchb0 at pci0 dev 0 function 0 "Intel E7221 MCH Host" > rev 0x05 > ppb0 at pci0 dev 1 function 0 "Intel E7221 PCIE" rev > 0x05 > pci1 at ppb0 bus 1 > ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev > 0x09 > pci2 at ppb1 bus 2 > bge0 at pci2 dev 1 function 0 "Broadcom BCM5704C" rev > 0x10, BCM5704 B0 (0x2100): irq 5, address > 00:14:c2:3b:f1:77 > brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, > rev. 0 > bge1 at pci2 dev 1 function 1 "Broadcom BCM5704C" rev > 0x10, BCM5704 B0 (0x2100): irq 7, address > 00:14:c2:3b:f1:76 > brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseT PHY, > rev. 0 > vendor "Symbios Logic", unknown product 0x0054 (class > mass storage subclass SCSI, rev 0x00) at pci2 dev 3 > function 0 not configured > ppb2 at pci1 dev 0 function 2 "Intel PCIE-PCIE" rev > 0x09 > pci3 at ppb2 bus 3 > ppb3 at pci0 dev 28 function 0 "Intel 82801FB PCIE" > rev 0x03 > pci4 at ppb3 bus 4 > uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" > rev 0x03: irq 5 > usb0 at uhci0: USB revision 1.0 > uhub0 at usb0 > uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" > rev 0x03: irq 7 > usb1 at uhci1: USB revision 1.0 > uhub1 at usb1 > uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" > rev 0x03: irq 10 > usb2 at uhci2: USB revision 1.0 > uhub2 at usb2 > uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1 > uhub2: 2 ports with 2 removable, self powered > uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" > rev 0x03: irq 10 > usb3 at uhci3: USB revision 1.0 > uhub3 at usb3 > uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1 > uhub3: 2 ports with 2 removable, self powered > ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" > rev 0x03: irq 5 > usb4 at ehci0: USB revision 2.0 > uhub4 at usb4 > uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1 > uhub4: 8 ports with 8 removable, self powered > ppb4 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev > 0xd3 > pci5 at ppb4 bus 5 > vendor "Compaq", unknown product 0xb203 (class system > subclass miscellaneous, rev 0x01) at pci5 dev 2 > function 0 not configured > vendor "Compaq", unknown product 0xb204 (class system > subclass miscellaneous, rev 0x01) at pci5 dev 2 > function 2 not configured > vga1 at pci5 dev 3 function 0 "ATI Rage XL" rev 0x27 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 > emulation) > ichpcib0 at pci0 dev 31 function 0 "Intel 82801FB LPC" > rev 0x03: PM disabled > pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" > rev 0x03: DMA, channel 0 configured to compatibility, > channel 1 configured to compatibility > pciide0: channel 0 disabled (no drives) > pciide0: channel 1 disabled (no drives) > isa0 at ichpcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > npx0 at isa0 port 0xf0/16: using exception 16 > pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte > fifo > pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte > fifo > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > biomask ffe5 netmask ffe5 ttymask ffe7 > rd0: fixed, 3800 blocks > umass0 at uhub4 port 4 configuration 1 interface 0 > umass0: LaCie LaCie DVD Drive USB2, rev 2.00/0.00, > addr 2 > umass0: using ATAPI over Bulk-Only > scsibus0 at umass0: 2 targets > cd0 at scsibus0 targ 1 lun 0: <_NEC, DVD_RW ND-3520A, > 1.04> SCSI0 5/cdrom removable > uhidev0 at uhub1 port 1 configuration 1 interface 0 > uhidev0: Avocent USB DSRIQ, rev 1.10/1.00, addr 2, > iclass 3/1 > ukbd0 at uhidev0 > wskbd1 at ukbd0 mux 1 > wskbd1: connecting to wsdisplay0 > uhidev1 at uhub1 port 1 configuration 1 interface 1 > uhidev1: Avocent USB DSRIQ, rev 1.10/1.00, addr 2, > iclass 3/1 > uhidev1: 3 report ids > uhid at uhidev1 reportid 1 not configured > uhid at uhidev1 reportid 2 not configured > uhid at uhidev1 reportid 3 not configured > root on rd0a > rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02 > > Thanks in advance. What is your question? Maybe it is better to see with your hardware vendor. I recommand you to deeply check hardware compatibility and support with OpenBSD before buying. -- oc