I found USB is easy with a thumbdrive big enough to hold the files, or there is pxe which is probably easier if you can control the DHCP on the network. My manual process for thumbdrive involved:
Assume thumb is empty, otherwise insert to system and run. Also make sure you know the dev name from insert message (this example it is sd0): dd if=/dev/zero of=/dev/rsd0a bs=32k This will zero the drive out. Then run: fdisk i /dev/rsd0c then y to overwrite and save MBR. Then edit disklabel: disklabel E /dev/rsd0c then a take all defaults, then w and finally q just like old times! Then create the FS: newfs /dev/rsd0a Now mount: mount /dev/sd0a /mnt/thumb and mount /dev/cd0a /mnt/cd Copy CD to thumb: cp r /mnt/cd/* /mnt/thumb/ and cp /usr/mdec/boot /mnt/thumb/ BOOT VOODOO: /usr/mdec/installboot /mnt/thumb/boot /usr/mdec/biosboot sd0 On Fri, Feb 24, 2012 at 6:12 PM, Duncan Patton a Campbell <campb...@neotext.ca> wrote: > I have run into a most peculiar phenomenon, that it appears that the > CDrom driver support has dropped from the install CDs, apparently > as of about version 5. This is not an old board, but admittedly > ATAPI CDs are. I can boot all the images from 4.9release thru > 5.1snap (today's) but only 4.9 shows any evidence of the CD after > booting and in the rest CDROM is not an option for install media > and there's no evidence of the device in the dmesgs, either. > > the sysctls after booting each cd: > > kern.osrelease=4.9 > hw.machine=amd64 > hw.model=AMD Phenom(tm) II X4 840 Processor > hw.product=M4A88TD-V EVO/USB3 > hw.disknames=cd0:,sd0:,wd0:e09436d04e1d70c4,rd0:2870906e5854e337,sd1:0e7d30fe 615c49b0 > hw.ncpufound=4 > > kern.osrelease=5.0 > hw.machine=amd64 > hw.model=AMD Phenom(tm) II X4 840 Processor > hw.product=M4A88TD-V EVO/USB3 > hw.disknames=sd0:,wd0:e09436d04e1d70c4,rd0:efa10dd049a97542 > hw.ncpufound=4 > > kern.osrelease=5.0 > hw.machine=amd64 > hw.model=AMD Phenom(tm) II X4 840 Processor > hw.product=M4A88TD-V EVO/USB3 > hw.disknames=sd0:,wd0:e09436d04e1d70c4,rd0:10f77ef34d162647,sd1:0e7d30fe615c4 9b0 > hw.ncpufound=4 > > kern.osrelease=5.1 > hw.machine=amd64 > hw.model=AMD Phenom(tm) II X4 840 Processor > hw.product=M4A88TD-V EVO/USB3 > hw.disknames=sd0:,wd0:e09436d04e1d70c4,rd0:7c8ac10ea613493f,sd1:0e7d30fe615c4 9b0 > hw.ncpufound=4 > > And, following, the dmesg output for these same install media. > > Any idea how this is so would help, thanks. > > Dhu > > > OpenBSD 4.9 (RAMDISK_CD) #858: Wed Mar 2 07:04:48 MST 2011 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD > real mem = 3488153600 (3326MB) > avail mem = 3383611392 (3226MB) > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.5 @ 0x9f000 (66 entries) > bios0: vendor American Megatrends Inc. version "1702" date 12/22/2010 > bios0: ASUSTeK Computer INC. M4A88TD-V EVO/USB3 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S1 S3 S4 S5 > acpi0: tables DSDT FACP APIC MCFG OEMB SRAT HPET SSDT > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: AMD Phenom(tm) II X4 840 Processor, 3214.66 MHz > cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DN OW > cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache > cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative > cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative > cpu0: apic clock running at 200MHz > cpu at mainbus0: not configured > cpu at mainbus0: not configured > cpu at mainbus0: not configured > ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (P0P1) > acpiprt2 at acpi0: bus -1 (PCE2) > acpiprt3 at acpi0: bus -1 (PCE3) > acpiprt4 at acpi0: bus -1 (PCE4) > acpiprt5 at acpi0: bus 2 (PCE9) > acpiprt6 at acpi0: bus 3 (PCEA) > acpiprt7 at acpi0: bus 4 (P0PC) > acpiprt8 at acpi0: bus 6 (PE21) > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "AMD RS780 Host" rev 0x00 > ppb0 at pci0 dev 1 function 0 vendor "Asustek", unknown product 0x9602 rev 0x00 > pci1 at ppb0 bus 1 > vga1 at pci1 dev 5 function 0 "ATI Radeon HD 4250" rev 0x00 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > "ATI Radeon HD 4200 HD Audio" rev 0x00 at pci1 dev 5 function 1 not configured > ppb1 at pci0 dev 9 function 0 "AMD RS780 PCIE" rev 0x00: apic 4 int 17 (irq 10) > pci2 at ppb1 bus 2 > vendor "VIA", unknown product 0x3403 (class serial bus subclass Firewire, rev 0x00) at pci2 dev 0 function 0 not configured > pciide0 at pci2 dev 0 function 1 vendor "VIA", unknown product 0x0415 rev 0xa0: DMA (unsupported), channel 0 wired to native-PCI, channel 1 wired to native-PCI > pciide0: using apic 4 int 17 (irq 10) for native-PCI interrupt > atapiscsi0 at pciide0 channel 0 drive 0 > scsibus0 at atapiscsi0: 2 targets > cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, RW/DVD GCC-H20N, 1.05> ATAPI 5/cdrom removable > pciide0: channel 1 ignored (not responding; disabled or no drives?) > ppb2 at pci0 dev 10 function 0 "AMD RS780 PCIE" rev 0x00: apic 4 int 18 (irq 11) > pci3 at ppb2 bus 3 > "NEC PCIE-XHCI" rev 0x03 at pci3 dev 0 function 0 not configured > ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x40: apic 4 int 19 (irq 9), AHCI 1.2 > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 0 lun 0: <ATA, ST3500320AS, SD15> SCSI3 0/direct fixed > sd0: 476938MB, 512 bytes/sec, 976771055 sec total > ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18 (irq 11), version 1.0, legacy support > ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17 (irq 10) > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1 > ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18 (irq 11), version 1.0, legacy support > ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17 (irq 10) > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1 > "ATI SBx00 SMBus" rev 0x42 at pci0 dev 20 function 0 not configured > pciide1 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x40: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility > wd0 at pciide1 channel 0 drive 1: <HDS728080PLA380> > wd0: 16-sector PIO, LBA48, 78533MB, 160836480 sectors > wd0(pciide1:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 > "ATI SBx00 HD Audio" rev 0x40 at pci0 dev 20 function 2 not configured > "ATI SB700 ISA" rev 0x40 at pci0 dev 20 function 3 not configured > ppb3 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40 > pci4 at ppb3 bus 4 > vr0 at pci4 dev 6 function 0 "VIA VT6105 RhineIII" rev 0x86: apic 4 int 21 (irq 3), address 00:15:e9:87:4a:38 > ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 4: OUI 0x004063, model 0x0034 > ohci2 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 4 int 18 (irq 11), version 1.0, legacy support > ppb4 at pci0 dev 21 function 0 vendor "ATI", unknown product 0x43a0 rev 0x00 > pci5 at ppb4 bus 5 > re0 at pci5 dev 0 function 0 "Realtek 8168" rev 0x01: RTL8168 2 (0x3800), apic 4 int 16 (irq 5), address 00:0a:cd:18:fb:7b > rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2 > ppb5 at pci0 dev 21 function 1 vendor "ATI", unknown product 0x43a1 rev 0x00 > pci6 at ppb5 bus 6 > re1 at pci6 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E (0x2c00), apic 4 int 17 (irq 10), address bc:ae:c5:bf:f6:47 > rgephy1 at re1 phy 7: RTL8169S/8110S PHY, rev. 4 > ohci3 at pci0 dev 22 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18 (irq 11), version 1.0, legacy support > ehci2 at pci0 dev 22 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17 (irq 10) > usb2 at ehci2: USB revision 2.0 > uhub2 at usb2 "ATI EHCI root hub" rev 2.00/1.00 addr 1 > pchb1 at pci0 dev 24 function 0 "AMD AMD64 10h HyperTransport" rev 0x00 > pchb2 at pci0 dev 24 function 1 "AMD AMD64 10h Address Map" rev 0x00 > pchb3 at pci0 dev 24 function 2 "AMD AMD64 10h DRAM Cfg" rev 0x00 > pchb4 at pci0 dev 24 function 3 "AMD AMD64 10h Misc Cfg" rev 0x00 > pchb5 at pci0 dev 24 function 4 "AMD AMD64 10h Link Cfg" rev 0x00 > usb3 at ohci0: USB revision 1.0 > uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > usb4 at ohci1: USB revision 1.0 > uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > usb5 at ohci2: USB revision 1.0 > uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > usb6 at ohci3: USB revision 1.0 > uhub6 at usb6 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > isa0 at mainbus0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > rd0: fixed, 4480 blocks > umass0 at uhub0 port 1 configuration 1 interface 0 "TE USB" rev 2.00/1.00 addr 2 > umass0: using SCSI over Bulk-Only > scsibus2 at umass0: 2 targets, initiator 0 > sd1 at scsibus2 targ 1 lun 0: <TE, USB, PMAP> SCSI0 0/direct removable > sd1: 3932MB, 512 bytes/sec, 8052736 sec total > uhidev0 at uhub4 port 1 configuration 1 interface 0 "Logitech USB Optical Mouse" rev 2.00/54.00 addr 2 > uhidev0: iclass 3/1 > uhid at uhidev0 not configured > softraid0 at root > root on rd0a swap on rd0b dump on rd0b > > OpenBSD 5.0 (RAMDISK_CD) #53: Wed Aug 17 10:17:43 MDT 2011 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD > real mem = 4025024512 (3838MB) > avail mem = 3906035712 (3725MB) > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.5 @ 0x9f000 (66 entries) > bios0: vendor American Megatrends Inc. version "1702" date 12/22/2010 > bios0: ASUSTeK Computer INC. M4A88TD-V EVO/USB3 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S1 S3 S4 S5 > acpi0: tables DSDT FACP APIC MCFG OEMB SRAT HPET SSDT > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: AMD Phenom(tm) II X4 840 Processor, 3214.65 MHz > cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DN OW > cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache > cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative > cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative > cpu0: apic clock running at 200MHz > cpu at mainbus0: not configured > cpu at mainbus0: not configured > cpu at mainbus0: not configured > ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (P0P1) > acpiprt2 at acpi0: bus -1 (PCE2) > acpiprt3 at acpi0: bus -1 (PCE3) > acpiprt4 at acpi0: bus -1 (PCE4) > acpiprt5 at acpi0: bus 2 (PCE9) > acpiprt6 at acpi0: bus 3 (PCEA) > acpiprt7 at acpi0: bus 4 (P0PC) > acpiprt8 at acpi0: bus 6 (PE21) > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "AMD RS880 Host" rev 0x00 > ppb0 at pci0 dev 1 function 0 vendor "Asustek", unknown product 0x9602 rev 0x00 > pci1 at ppb0 bus 1 > vga1 at pci1 dev 5 function 0 "ATI Radeon HD 4250" rev 0x00 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > "ATI Radeon HD 4200 HD Audio" rev 0x00 at pci1 dev 5 function 1 not configured > ppb1 at pci0 dev 9 function 0 "AMD RS780 PCIE" rev 0x00: msi > pci2 at ppb1 bus 2 > vendor "VIA", unknown product 0x3403 (class serial bus subclass Firewire, rev 0x00) at pci2 dev 0 function 0 not configured > pciide0 at pci2 dev 0 function 1 "VIA VT6415 IDE" rev 0xa0: ATA133, channel 0 wired to native-PCI, channel 1 wired to native-PCI > pciide0: channel 0 ignored (disabled) > pciide0: channel 1 ignored (disabled) > ppb2 at pci0 dev 10 function 0 "AMD RS780 PCIE" rev 0x00: msi > pci3 at ppb2 bus 3 > "NEC PCIE-XHCI" rev 0x03 at pci3 dev 0 function 0 not configured > ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x40: apic 4 int 19, AHCI 1.2 > scsibus0 at ahci0: 32 targets > sd0 at scsibus0 targ 0 lun 0: <ATA, ST3500320AS, SD15> SCSI3 0/direct fixed naa.5000c5000b836275 > sd0: 476938MB, 512 bytes/sector, 976771055 sectors > ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support > ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1 > ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support > ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17 > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1 > "ATI SBx00 SMBus" rev 0x42 at pci0 dev 20 function 0 not configured > pciide1 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x40: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility > wd0 at pciide1 channel 0 drive 1: <HDS728080PLA380> > wd0: 16-sector PIO, LBA48, 78533MB, 160836480 sectors > wd0(pciide1:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 > "ATI SBx00 HD Audio" rev 0x40 at pci0 dev 20 function 2 not configured > "ATI SB700 ISA" rev 0x40 at pci0 dev 20 function 3 not configured > ppb3 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40 > pci4 at ppb3 bus 4 > vr0 at pci4 dev 6 function 0 "VIA VT6105 RhineIII" rev 0x86: apic 4 int 21, address 00:15:e9:87:4a:38 > ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 4: OUI 0x004063, model 0x0034 > ohci2 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support > ppb4 at pci0 dev 21 function 0 "ATI SB800 PCIE" rev 0x00 > pci5 at ppb4 bus 5 > re0 at pci5 dev 0 function 0 "Realtek 8168" rev 0x01: RTL8168 2 (0x3800), apic 4 int 16, address 00:0a:cd:18:fb:7b > rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2 > ppb5 at pci0 dev 21 function 1 "ATI SB800 PCIE" rev 0x00 > pci6 at ppb5 bus 6 > re1 at pci6 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E (0x2c00), apic 4 int 17, address bc:ae:c5:bf:f6:47 > rgephy1 at re1 phy 7: RTL8169S/8110S PHY, rev. 4 > ohci3 at pci0 dev 22 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support > ehci2 at pci0 dev 22 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17 > usb2 at ehci2: USB revision 2.0 > uhub2 at usb2 "ATI EHCI root hub" rev 2.00/1.00 addr 1 > pchb1 at pci0 dev 24 function 0 "AMD AMD64 10h HyperTransport" rev 0x00 > pchb2 at pci0 dev 24 function 1 "AMD AMD64 10h Address Map" rev 0x00 > pchb3 at pci0 dev 24 function 2 "AMD AMD64 10h DRAM Cfg" rev 0x00 > pchb4 at pci0 dev 24 function 3 "AMD AMD64 10h Misc Cfg" rev 0x00 > pchb5 at pci0 dev 24 function 4 "AMD AMD64 10h Link Cfg" rev 0x00 > usb3 at ohci0: USB revision 1.0 > uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > usb4 at ohci1: USB revision 1.0 > uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > usb5 at ohci2: USB revision 1.0 > uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > usb6 at ohci3: USB revision 1.0 > uhub6 at usb6 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > isa0 at mainbus0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > uhidev0 at uhub4 port 1 configuration 1 interface 0 "Logitech USB Optical Mouse" rev 2.00/54.00 addr 2 > uhidev0: iclass 3/1 > uhid at uhidev0 not configured > softraid0 at root > scsibus1 at softraid0: 256 targets > root on rd0a swap on rd0b dump on rd0b > > > OpenBSD 5.0-stable (RAMDISK_CD) #0: Tue Feb 21 15:59:16 MST 2012 > r...@jimg.indx.ca:/dmnt/src/sys/arch/amd64/compile/RAMDISK_CD > real mem = 4025024512 (3838MB) > avail mem = 3906035712 (3725MB) > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.5 @ 0x9f000 (66 entries) > bios0: vendor American Megatrends Inc. version "1702" date 12/22/2010 > bios0: ASUSTeK Computer INC. M4A88TD-V EVO/USB3 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S1 S3 S4 S5 > acpi0: tables DSDT FACP APIC MCFG OEMB SRAT HPET SSDT > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: AMD Phenom(tm) II X4 840 Processor, 3214.66 MHz > cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DN OW > cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache > cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative > cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative > cpu0: apic clock running at 200MHz > cpu at mainbus0: not configured > cpu at mainbus0: not configured > cpu at mainbus0: not configured > ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (P0P1) > acpiprt2 at acpi0: bus -1 (PCE2) > acpiprt3 at acpi0: bus -1 (PCE3) > acpiprt4 at acpi0: bus -1 (PCE4) > acpiprt5 at acpi0: bus 2 (PCE9) > acpiprt6 at acpi0: bus 3 (PCEA) > acpiprt7 at acpi0: bus 4 (P0PC) > acpiprt8 at acpi0: bus 6 (PE21) > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "AMD RS880 Host" rev 0x00 > ppb0 at pci0 dev 1 function 0 vendor "Asustek", unknown product 0x9602 rev 0x00 > pci1 at ppb0 bus 1 > vga1 at pci1 dev 5 function 0 "ATI Radeon HD 4250" rev 0x00 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > "ATI Radeon HD 4200 HD Audio" rev 0x00 at pci1 dev 5 function 1 not configured > ppb1 at pci0 dev 9 function 0 "AMD RS780 PCIE" rev 0x00: msi > pci2 at ppb1 bus 2 > vendor "VIA", unknown product 0x3403 (class serial bus subclass Firewire, rev 0x00) at pci2 dev 0 function 0 not configured > pciide0 at pci2 dev 0 function 1 "VIA VT6415 IDE" rev 0xa0: ATA133, channel 0 wired to native-PCI, channel 1 wired to native-PCI > pciide0: channel 0 ignored (disabled) > pciide0: channel 1 ignored (disabled) > ppb2 at pci0 dev 10 function 0 "AMD RS780 PCIE" rev 0x00: msi > pci3 at ppb2 bus 3 > "NEC PCIE-XHCI" rev 0x03 at pci3 dev 0 function 0 not configured > ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x40: apic 4 int 19, AHCI 1.2 > scsibus0 at ahci0: 32 targets > sd0 at scsibus0 targ 0 lun 0: <ATA, ST3500320AS, SD15> SCSI3 0/direct fixed naa.5000c5000b836275 > sd0: 476938MB, 512 bytes/sector, 976771055 sectors > ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support > ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1 > ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support > ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17 > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1 > "ATI SBx00 SMBus" rev 0x42 at pci0 dev 20 function 0 not configured > pciide1 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x40: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility > wd0 at pciide1 channel 0 drive 1: <HDS728080PLA380> > wd0: 16-sector PIO, LBA48, 78533MB, 160836480 sectors > wd0(pciide1:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 > "ATI SBx00 HD Audio" rev 0x40 at pci0 dev 20 function 2 not configured > "ATI SB700 ISA" rev 0x40 at pci0 dev 20 function 3 not configured > ppb3 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40 > pci4 at ppb3 bus 4 > vr0 at pci4 dev 6 function 0 "VIA VT6105 RhineIII" rev 0x86: apic 4 int 21, address 00:15:e9:87:4a:38 > ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 4: OUI 0x004063, model 0x0034 > ohci2 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support > ppb4 at pci0 dev 21 function 0 "ATI SB800 PCIE" rev 0x00 > pci5 at ppb4 bus 5 > re0 at pci5 dev 0 function 0 "Realtek 8168" rev 0x01: RTL8168 2 (0x3800), apic 4 int 16, address 00:0a:cd:18:fb:7b > rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2 > ppb5 at pci0 dev 21 function 1 "ATI SB800 PCIE" rev 0x00 > pci6 at ppb5 bus 6 > re1 at pci6 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E (0x2c00), apic 4 int 17, address bc:ae:c5:bf:f6:47 > rgephy1 at re1 phy 7: RTL8169S/8110S PHY, rev. 4 > ohci3 at pci0 dev 22 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support > ehci2 at pci0 dev 22 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17 > usb2 at ehci2: USB revision 2.0 > uhub2 at usb2 "ATI EHCI root hub" rev 2.00/1.00 addr 1 > pchb1 at pci0 dev 24 function 0 "AMD AMD64 10h HyperTransport" rev 0x00 > pchb2 at pci0 dev 24 function 1 "AMD AMD64 10h Address Map" rev 0x00 > pchb3 at pci0 dev 24 function 2 "AMD AMD64 10h DRAM Cfg" rev 0x00 > pchb4 at pci0 dev 24 function 3 "AMD AMD64 10h Misc Cfg" rev 0x00 > pchb5 at pci0 dev 24 function 4 "AMD AMD64 10h Link Cfg" rev 0x00 > usb3 at ohci0: USB revision 1.0 > uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > usb4 at ohci1: USB revision 1.0 > uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > usb5 at ohci2: USB revision 1.0 > uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > usb6 at ohci3: USB revision 1.0 > uhub6 at usb6 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > isa0 at mainbus0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > umass0 at uhub0 port 1 configuration 1 interface 0 "TE USB" rev 2.00/1.00 addr 2 > umass0: using SCSI over Bulk-Only > scsibus1 at umass0: 2 targets, initiator 0 > sd1 at scsibus1 targ 1 lun 0: <TE, USB, PMAP> SCSI0 0/direct removable serial.1234ffff0800FFAF4AC9 > sd1: 3932MB, 512 bytes/sector, 8052736 sectors > uhidev0 at uhub4 port 1 configuration 1 interface 0 "Logitech USB Optical Mouse" rev 2.00/54.00 addr 2 > uhidev0: iclass 3/1 > uhid at uhidev0 not configured > softraid0 at root > scsibus2 at softraid0: 256 targets > root on rd0a swap on rd0b dump on rd0b > > > OpenBSD 5.1 (RAMDISK_CD) #23: Sun Feb 12 09:45:07 MST 2012 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD > real mem = 4025024512 (3838MB) > avail mem = 3906035712 (3725MB) > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.5 @ 0x9f000 (66 entries) > bios0: vendor American Megatrends Inc. version "1702" date 12/22/2010 > bios0: ASUSTeK Computer INC. M4A88TD-V EVO/USB3 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S1 S3 S4 S5 > acpi0: tables DSDT FACP APIC MCFG OEMB SRAT HPET SSDT > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: AMD Phenom(tm) II X4 840 Processor, 3214.73 MHz > cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DN OW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT > cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache > cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative > cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative > cpu0: apic clock running at 200MHz > cpu at mainbus0: not configured > cpu at mainbus0: not configured > cpu at mainbus0: not configured > ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (P0P1) > acpiprt2 at acpi0: bus -1 (PCE2) > acpiprt3 at acpi0: bus -1 (PCE3) > acpiprt4 at acpi0: bus -1 (PCE4) > acpiprt5 at acpi0: bus 2 (PCE9) > acpiprt6 at acpi0: bus 3 (PCEA) > acpiprt7 at acpi0: bus 4 (P0PC) > acpiprt8 at acpi0: bus 6 (PE21) > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "AMD RS880 Host" rev 0x00 > ppb0 at pci0 dev 1 function 0 vendor "Asustek", unknown product 0x9602 rev 0x00 > pci1 at ppb0 bus 1 > vga1 at pci1 dev 5 function 0 "ATI Radeon HD 4250" rev 0x00 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > "ATI Radeon HD 4200 HD Audio" rev 0x00 at pci1 dev 5 function 1 not configured > ppb1 at pci0 dev 9 function 0 "AMD RS780 PCIE" rev 0x00: msi > pci2 at ppb1 bus 2 > vendor "VIA", unknown product 0x3403 (class serial bus subclass Firewire, rev 0x00) at pci2 dev 0 function 0 not configured > pciide0 at pci2 dev 0 function 1 "VIA VT6415 IDE" rev 0xa0: ATA133, channel 0 wired to native-PCI, channel 1 wired to native-PCI > pciide0: channel 0 ignored (disabled) > pciide0: channel 1 ignored (disabled) > ppb2 at pci0 dev 10 function 0 "AMD RS780 PCIE" rev 0x00: msi > pci3 at ppb2 bus 3 > "NEC xHCI" rev 0x03 at pci3 dev 0 function 0 not configured > ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x40: apic 4 int 19, AHCI 1.2 > scsibus0 at ahci0: 32 targets > sd0 at scsibus0 targ 0 lun 0: <ATA, ST3500320AS, SD15> SCSI3 0/direct fixed naa.5000c5000b836275 > sd0: 476938MB, 512 bytes/sector, 976771055 sectors > ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support > ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1 > ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support > ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17 > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1 > "ATI SBx00 SMBus" rev 0x42 at pci0 dev 20 function 0 not configured > pciide1 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x40: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility > wd0 at pciide1 channel 0 drive 1: <HDS728080PLA380> > wd0: 16-sector PIO, LBA48, 78533MB, 160836480 sectors > wd0(pciide1:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 > "ATI SBx00 HD Audio" rev 0x40 at pci0 dev 20 function 2 not configured > "ATI SB700 ISA" rev 0x40 at pci0 dev 20 function 3 not configured > ppb3 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40 > pci4 at ppb3 bus 4 > vr0 at pci4 dev 6 function 0 "VIA VT6105 RhineIII" rev 0x86: apic 4 int 21, address 00:15:e9:87:4a:38 > ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 4: OUI 0x004063, model 0x0034 > ohci2 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support > ppb4 at pci0 dev 21 function 0 "ATI SB800 PCIE" rev 0x00 > pci5 at ppb4 bus 5 > re0 at pci5 dev 0 function 0 "Realtek 8168" rev 0x01: RTL8168 2 (0x3800), apic 4 int 16, address 00:0a:cd:18:fb:7b > rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2 > ppb5 at pci0 dev 21 function 1 "ATI SB800 PCIE" rev 0x00 > pci6 at ppb5 bus 6 > re1 at pci6 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E (0x2c00), apic 4 int 17, address bc:ae:c5:bf:f6:47 > rgephy1 at re1 phy 7: RTL8169S/8110S PHY, rev. 4 > ohci3 at pci0 dev 22 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support > ehci2 at pci0 dev 22 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17 > usb2 at ehci2: USB revision 2.0 > uhub2 at usb2 "ATI EHCI root hub" rev 2.00/1.00 addr 1 > pchb1 at pci0 dev 24 function 0 "AMD AMD64 10h HyperTransport" rev 0x00 > pchb2 at pci0 dev 24 function 1 "AMD AMD64 10h Address Map" rev 0x00 > pchb3 at pci0 dev 24 function 2 "AMD AMD64 10h DRAM Cfg" rev 0x00 > pchb4 at pci0 dev 24 function 3 "AMD AMD64 10h Misc Cfg" rev 0x00 > pchb5 at pci0 dev 24 function 4 "AMD AMD64 10h Link Cfg" rev 0x00 > usb3 at ohci0: USB revision 1.0 > uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > usb4 at ohci1: USB revision 1.0 > uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > usb5 at ohci2: USB revision 1.0 > uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > usb6 at ohci3: USB revision 1.0 > uhub6 at usb6 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > isa0 at mainbus0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > umass0 at uhub0 port 1 configuration 1 interface 0 "TE USB" rev 2.00/1.00 addr 2 > umass0: using SCSI over Bulk-Only > scsibus1 at umass0: 2 targets, initiator 0 > sd1 at scsibus1 targ 1 lun 0: <TE, USB, PMAP> SCSI0 0/direct removable serial.1234ffff0800FFAF4AC9 > sd1: 3932MB, 512 bytes/sector, 8052736 sectors > uhidev0 at uhub4 port 1 configuration 1 interface 0 "Logitech USB Optical Mouse" rev 2.00/54.00 addr 2 > uhidev0: iclass 3/1 > uhid at uhidev0 not configured > softraid0 at root > scsibus2 at softraid0: 256 targets > root on rd0a swap on rd0b dump on rd0b > > -- > Duncan Patton a Campbell is Dhu >>> Ne obliviscaris, vix ea nostro voco.
