On Sun, 26 Feb 2012 17:17:00 -0500 Brynet <bry...@gmail.com> wrote: > On Sun, Feb 26, 2012 at 02:07:19AM -0700, Duncan Patton a Campbell wrote: > > I am also wondering if this caused a failure in my raid1 set which > > kakked out into "degraded" mode at the same time I upgraded to > > 5.0, as the same ide path may be being used. > > The DVD drive is on a seperate IDE controller, so this is clearly > unrelated. I can't help you with your softraid problems. > > On Sun, Feb 26, 2012 at 02:13:46PM -0700, Duncan Patton a Campbell wrote: > > woops no go on the cd.. was looking at the wrong mountpoint ... looks ok, > > spins up, thats all. > > What's in the drive, the installation disk? > > # disklabel cd0 > .. > > If the drive isn't working with the generic PCI IDE driver, then as > said, you'll need to find out what needs to be done in the VIA-specific > code. > > There isn't anything else I can do for you, contact the developer that > committed the change. > > -Bryan.
Is the dev for this here on misc or should I go hunting? Basically the VIA Code (VT6415 IDE) for IDE CD/DVD drives appears to be hooped. Am now gonna try the latest snap.. Dhu -- Duncan Patton a Campbell is Dhu >>> Ne obliviscaris, vix ea nostro voco.