Hello Misc,

I have a Jetway NC9KDL-2700 mini-itx motherboard, bought it as a rackmountable
system from itxdepot.com.  The case I have contains two of these boards.

Motherboard page:
http://www.jetway.com.tw/JW/Peripherals_view.asp?proname=NC9KDL-2700&productid=931

Here are the specs:

Intel. Atom Dual Core D2700 (2.13 GHz @ 10W)
Intel. NM10 Chipset
PowerVR SGX 545 (GMA 3650 @ 640 MHz) Integrated Graphics for D2700 Support 2 x
204-pin SO-DIMM DDR3 800/1066 slot up to 4 GB
  - I have 4GB installed
Support 2 * Serial ATAII (3Gb/s) Devices
2 x Realtek RTL8111EVL PCI-E Gigabit Ethernet LAN with Enhanced Surge Protection
Realtek ALC662 5.1 Channel Audio
Supports Dual Independent Display
HDMI/VGA and 24-bit LVDS Video Outputs
Watchdog Timer System Resets; 1-255 min/sec
1 * 24 bits Single Channel LVDS header
Compliance with ErP standard
Mini-ITX Form Factor (170mm x 170mm)

For a hard drive I am using a OCZ SATA II SSD. Model is a Vertex Plus, 60GB,
in a 2.5" form factor.  Also using an external USB DVD drive to install
OpenBSD.

I will post /var/log/messages and dmesg below, but figured I would state
several of my issues first, and diagnostics:

1. Unless I disable acpi (see dmesg), box freezes at 'acpiec0 at acpi0'

2. Box is very slow to respond to commands (for example, copying dmesg to
another PC via scp took 5 minutes)

3. network connectivity is basically useless.  I have RE0 set to 192.168.1.54,
can't ping anything, for example 192.168.1.15 (my server), message I get is
"host is down". The server is up, and it can't ping the box.  Not sure what to
make of this.

4. To see if this was an issue with the motherboard, I moved the drive to the
other identical motherboard, same issues (linux runs fine, btw, so I know this
board is good).

5. I've loaded both the i386 5.0 release and the latest 5.1 snapshot, same
issues.

6. pf is enabled.

7. I've monkeyed with various BIOS settings, the only outcome of this this
that if I disable too much, board won't boot, I have to reset BIOS to default
via jumper.

Any help appreciated.  I AM WILLING TO PROCURE AND PROVIDE THIS BOARD TO A
DEVELOPER!!!!

Dmesg:
OpenBSD 5.1-current (GENERIC.MP) #208: Thu Mar 22 11:30:37 MDT 2012
    dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Atom(TM) CPU D2700 @ 2.13GHz ("GenuineIntel" 686-class) 2.13 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,SSE3,MWAIT,DS-CPL,TM2,SSSE3,xTPR,PDCM,MOVBE,LAHF
real mem  = 3476844544 (3315MB)
avail mem = 3409215488 (3251MB)
User Kernel Config
UKC> disable acpi
469 acpi0 disabled
UKC> quit
Continuing...
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 10/20/10, SMBIOS rev. 2.7 @ 0xe9660 (51
entries)
bios0: vendor American Megatrends Inc. version "4.6.4" date 12/01/2011
acpi at bios0 function 0x0 not configured
mpbios0 at bios0: Intel MP Specification 1.4
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133MHz
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Atom(TM) CPU D2700 @ 2.13GHz ("GenuineIntel" 686-class) 2.13 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,SSE3,MWAIT,DS-CPL,TM2,SSSE3,xTPR,PDCM,MOVBE,LAHF
mpbios0: bus 0 is type PCI
mpbios0: bus 1 is type PCI
mpbios0: bus 2 is type PCI
mpbios0: bus 3 is type PCI
mpbios0: bus 4 is type PCI
mpbios0: bus 5 is type PCI
mpbios0: bus 6 is type ISA
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
mpbios: can't find ioapic 0
pcibios at bios0 function 0x1a not configured
bios0: ROM list: 0xc0000/0xf200!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x0bf3 rev 0x03
vga1 at pci0 dev 2 function 0 vendor "Intel", unknown product 0x0be2 rev 0x09
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp at vga1 not configured
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02pci_intr_map: bus
0 dev 28 func 0 pin 1; line 11
pci_intr_map: no MP mapping found
: irq 11
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02pci_intr_map: bus
0 dev 28 func 1 pin 2; line 10
pci_intr_map: no MP mapping found
: irq 10
pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E-VL
(0x2c80), apic 4 int 10, address 00:30:18:a5:a2:55
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 5
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02pci_intr_map: bus
0 dev 28 func 2 pin 3; line 5
pci_intr_map: no MP mapping found
: irq 5
pci3 at ppb2 bus 3
re1 at pci3 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E-VL
(0x2c80), apic 4 int 5, address 00:30:18:a5:a2:56
rgephy1 at re1 phy 7: RTL8169S/8110S PHY, rev. 5
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02pci_intr_map: bus
0 dev 28 func 3 pin 4; line 3
pci_intr_map: no MP mapping found
: irq 3
pci4 at ppb3 bus 4
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02pci_intr_map: bus
0 dev 29 func 0 pin 1; line 7
pci_intr_map: no MP mapping found
: irq 7
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 4 int 3
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 4 int 5
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 4 int 11
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 4 int 7
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci5 at ppb4 bus 5
pcib0 at pci0 dev 31 function 0 "Intel Tigerpoint LPC" rev 0x02
ahci0 at pci0 dev 31 function 2 "Intel 82801GR AHCI" rev 0x02: msi, AHCI 1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, OCZ VERTEX PLUS, 3.50> SCSI3 0/direct
fixed t10.ATA_OCZ_VERTEX_PLUS_4PY89M4JT30B9GP862J8
sd0: 57241MB, 512 bytes/sector, 117231408 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 4 int 3
iic0 at ichiic0
spdmem0 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
uhub0: device problem, disabling port 6
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a (de2e70f906db6d99.a) swap on sd0b dump on sd0b
re0: watchdog timeout
re0: watchdog timeout
re0: watchdog timeout
re0: watchdog timeout
re0: watchdog timeout
re0: watchdog timeout
re0: watchdog timeout
re0: watchdog timeout
re0: watchdog timeout
re0: watchdog timeout
re0: watchdog timeout
re0: watchdog timeout
re0: watchdog timeout
re0: watchdog timeout
re0: watchdog timeout
re0: watchdog timeout
re0: watchdog timeout
re0: watchdog timeout
re0: watchdog timeout
re0: watchdog timeout
re0: watchdog timeout
re0: watchdog timeout
re0: watchdog timeout
re0: watchdog timeout
re0: watchdog timeout
re0: watchdog timeout
re0: watchdog timeout
re0: watchdog timeout
re0: watchdog timeout
re0: watchdog timeout
re0: watchdog timeout
re0: watchdog timeout
re0: watchdog timeout
re0: watchdog timeout
re0: watchdog timeout
re0: watchdog timeout
re0: watchdog timeout
re0: watchdog timeout
re0: watchdog timeout
re0: watchdog timeout
re0: watchdog timeout

/var/log/Messages:
Mar 24 17:58:15 o51 syslogd: start
Mar 24 17:58:15 o51 /bsd: OpenBSD 5.1-current (GENERIC.MP) #208: Thu Mar 22
11:30:37 MDT 2012
Mar 24 17:58:15 o51 /bsd:    
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
Mar 24 17:58:15 o51 /bsd: cpu0: Intel(R) Atom(TM) CPU D2700 @ 2.13GHz
("GenuineIntel" 686-class) 2.13 GHz
Mar 24 17:58:15 o51 /bsd: cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,SSE3,MWAIT,DS-CPL,TM2,SSSE3,xTPR,PDCM,MOVBE,LAHF
Mar 24 17:58:15 o51 /bsd: real mem  = 3476844544 (3315MB)
Mar 24 17:58:15 o51 /bsd: avail mem = 3409215488 (3251MB)
Mar 24 17:58:15 o51 /bsd: User Kernel Config
Mar 24 17:58:15 o51 /bsd: UKC> disable acpi
Mar 24 17:58:15 o51 /bsd: 469 acpi0 disabled
Mar 24 17:58:15 o51 /bsd: UKC> quit
Mar 24 17:58:15 o51 /bsd: Continuing...
Mar 24 17:58:15 o51 /bsd: mainbus0 at root
Mar 24 17:58:15 o51 /bsd: bios0 at mainbus0: AT/286+ BIOS, date 10/20/10,
SMBIOS rev. 2.7 @ 0xe9660 (51 entries)
Mar 24 17:58:15 o51 /bsd: bios0: vendor American Megatrends Inc. version
"4.6.4" date 12/01/2011
Mar 24 17:58:15 o51 /bsd: acpi at bios0 function 0x0 not configured
Mar 24 17:58:15 o51 /bsd: mpbios0 at bios0: Intel MP Specification 1.4
Mar 24 17:58:15 o51 /bsd: cpu0 at mainbus0: apid 0 (boot processor)
Mar 24 17:58:15 o51 /bsd: cpu0: apic clock running at 133MHz
Mar 24 17:58:15 o51 /bsd: cpu1 at mainbus0: apid 2 (application processor)
Mar 24 17:58:15 o51 /bsd: cpu1: Intel(R) Atom(TM) CPU D2700 @ 2.13GHz
("GenuineIntel" 686-class) 2.13 GHz
Mar 24 17:58:15 o51 /bsd: cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,SSE3,MWAIT,DS-CPL,TM2,SSSE3,xTPR,PDCM,MOVBE,LAHF
Mar 24 17:58:15 o51 /bsd: mpbios0: bus 0 is type PCI
Mar 24 17:58:15 o51 /bsd: mpbios0: bus 1 is type PCI
Mar 24 17:58:15 o51 /bsd: mpbios0: bus 2 is type PCI
Mar 24 17:58:15 o51 /bsd: mpbios0: bus 3 is type PCI
Mar 24 17:58:15 o51 /bsd: mpbios0: bus 4 is type PCI
Mar 24 17:58:15 o51 /bsd: mpbios0: bus 5 is type PCI
Mar 24 17:58:15 o51 /bsd: mpbios0: bus 6 is type ISA
Mar 24 17:58:15 o51 /bsd: ioapic0 at mainbus0: apid 4 pa 0xfec00000, version
20, 24 pins
Mar 24 17:58:15 o51 /bsd: mpbios: can't find ioapic 0
Mar 24 17:58:15 o51 last message repeated 46 times
Mar 24 17:58:15 o51 /bsd: pcibios at bios0 function 0x1a not configured
Mar 24 17:58:15 o51 /bsd: bios0: ROM list: 0xc0000/0xf200!
Mar 24 17:58:15 o51 /bsd: pci0 at mainbus0 bus 0: configuration mode 1 (bios)
Mar 24 17:58:15 o51 /bsd: pchb0 at pci0 dev 0 function 0 vendor "Intel",
unknown product 0x0bf3 rev 0x03
Mar 24 17:58:15 o51 /bsd: vga1 at pci0 dev 2 function 0 vendor "Intel",
unknown product 0x0be2 rev 0x09
Mar 24 17:58:15 o51 /bsd: wsdisplay0 at vga1 mux 1: console (80x25, vt100
emulation)
Mar 24 17:58:15 o51 /bsd: wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
Mar 24 17:58:15 o51 /bsd: intagp at vga1 not configured
Mar 24 17:58:15 o51 /bsd: ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE"
rev 0x02pci_intr_map: bus 0 dev 28 func 0 pin 1; line 11
Mar 24 17:58:15 o51 /bsd: pci_intr_map: no MP mapping found
Mar 24 17:58:15 o51 /bsd: : irq 11
Mar 24 17:58:15 o51 /bsd: pci1 at ppb0 bus 1
Mar 24 17:58:15 o51 /bsd: ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE"
rev 0x02pci_intr_map: bus 0 dev 28 func 1 pin 2; line 10
Mar 24 17:58:15 o51 /bsd: pci_intr_map: no MP mapping found
Mar 24 17:58:15 o51 /bsd: : irq 10
Mar 24 17:58:15 o51 /bsd: pci2 at ppb1 bus 2
Mar 24 17:58:15 o51 /bsd: re0 at pci2 dev 0 function 0 "Realtek 8168" rev
0x06: RTL8168E/8111E-VL (0x2c80), apic 4 int 10, address 00:30:18:a5:a2:55
Mar 24 17:58:15 o51 /bsd: rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 5
Mar 24 17:58:15 o51 /bsd: ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE"
rev 0x02pci_intr_map: bus 0 dev 28 func 2 pin 3; line 5
Mar 24 17:58:15 o51 /bsd: pci_intr_map: no MP mapping found
Mar 24 17:58:15 o51 /bsd: : irq 5
Mar 24 17:58:15 o51 /bsd: pci3 at ppb2 bus 3
Mar 24 17:58:15 o51 /bsd: re1 at pci3 dev 0 function 0 "Realtek 8168" rev
0x06: RTL8168E/8111E-VL (0x2c80), apic 4 int 5, address 00:30:18:a5:a2:56
Mar 24 17:58:15 o51 /bsd: rgephy1 at re1 phy 7: RTL8169S/8110S PHY, rev. 5
Mar 24 17:58:15 o51 /bsd: ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE"
rev 0x02pci_intr_map: bus 0 dev 28 func 3 pin 4; line 3
Mar 24 17:58:15 o51 /bsd: pci_intr_map: no MP mapping found
Mar 24 17:58:15 o51 /bsd: : irq 3
Mar 24 17:58:15 o51 /bsd: pci4 at ppb3 bus 4
Mar 24 17:58:15 o51 /bsd: uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB"
rev 0x02pci_intr_map: bus 0 dev 29 func 0 pin 1; line 7
Mar 24 17:58:15 o51 /bsd: pci_intr_map: no MP mapping found
Mar 24 17:58:15 o51 /bsd: : irq 7
Mar 24 17:58:15 o51 /bsd: uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB"
rev 0x02: apic 4 int 3
Mar 24 17:58:15 o51 /bsd: uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB"
rev 0x02: apic 4 int 5
Mar 24 17:58:15 o51 /bsd: uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB"
rev 0x02: apic 4 int 11
Mar 24 17:58:15 o51 /bsd: ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB"
rev 0x02: apic 4 int 7
Mar 24 17:58:15 o51 /bsd: usb0 at ehci0: USB revision 2.0
Mar 24 17:58:15 o51 /bsd: uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
Mar 24 17:58:15 o51 /bsd: ppb4 at pci0 dev 30 function 0 "Intel 82801BAM
Hub-to-PCI" rev 0xe2
Mar 24 17:58:15 o51 /bsd: pci5 at ppb4 bus 5
Mar 24 17:58:15 o51 /bsd: pcib0 at pci0 dev 31 function 0 "Intel Tigerpoint
LPC" rev 0x02
Mar 24 17:58:15 o51 /bsd: ahci0 at pci0 dev 31 function 2 "Intel 82801GR AHCI"
rev 0x02: msi, AHCI 1.1
Mar 24 17:58:15 o51 /bsd: scsibus0 at ahci0: 32 targets
Mar 24 17:58:15 o51 /bsd: sd0 at scsibus0 targ 0 lun 0: <ATA, OCZ VERTEX PLUS,
3.50> SCSI3 0/direct fixed t10.ATA_OCZ_VERTEX_PLUS_4PY89M4JT30B9GP862J8
Mar 24 17:58:15 o51 /bsd: sd0: 57241MB, 512 bytes/sector, 117231408 sectors, 
thin
Mar 24 17:58:15 o51 /bsd: ichiic0 at pci0 dev 31 function 3 "Intel 82801GB
SMBus" rev 0x02: apic 4 int 3
Mar 24 17:58:15 o51 /bsd: iic0 at ichiic0
Mar 24 17:58:15 o51 /bsd: spdmem0 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600
SO-DIMM
Mar 24 17:58:15 o51 /bsd: usb1 at uhci0: USB revision 1.0
Mar 24 17:58:15 o51 /bsd: uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00
addr 1
Mar 24 17:58:15 o51 /bsd: usb2 at uhci1: USB revision 1.0
Mar 24 17:58:15 o51 /bsd: uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00
addr 1
Mar 24 17:58:15 o51 /bsd: usb3 at uhci2: USB revision 1.0
Mar 24 17:58:15 o51 /bsd: uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00
addr 1
Mar 24 17:58:15 o51 /bsd: usb4 at uhci3: USB revision 1.0
Mar 24 17:58:15 o51 /bsd: uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00
addr 1
Mar 24 17:58:15 o51 /bsd: isa0 at pcib0
Mar 24 17:58:15 o51 /bsd: isadma0 at isa0
Mar 24 17:58:15 o51 /bsd: pckbc0 at isa0 port 0x60/5
Mar 24 17:58:15 o51 /bsd: pckbd0 at pckbc0 (kbd slot)
Mar 24 17:58:15 o51 /bsd: pckbc0: using irq 1 for kbd slot
Mar 24 17:58:15 o51 /bsd: wskbd0 at pckbd0: console keyboard, using wsdisplay0
Mar 24 17:58:15 o51 /bsd: pms0 at pckbc0 (aux slot)
Mar 24 17:58:15 o51 /bsd: pckbc0: using irq 12 for aux slot
Mar 24 17:58:15 o51 /bsd: wsmouse0 at pms0 mux 0
Mar 24 17:58:15 o51 /bsd: pcppi0 at isa0 port 0x61
Mar 24 17:58:15 o51 /bsd: spkr0 at pcppi0
Mar 24 17:58:15 o51 /bsd: npx0 at isa0 port 0xf0/16: reported by CPUID; using
exception 16
Mar 24 17:58:15 o51 /bsd: mtrr: Pentium Pro MTRR support
Mar 24 17:58:15 o51 /bsd: ehci_sync_hc: tsleep() = 35
Mar 24 17:58:15 o51 last message repeated 14 times
Mar 24 17:58:15 o51 /bsd: uhub0: device problem, disabling port 6
Mar 24 17:58:15 o51 /bsd: vscsi0 at root
Mar 24 17:58:15 o51 /bsd: scsibus1 at vscsi0: 256 targets
Mar 24 17:58:15 o51 /bsd: softraid0 at root
Mar 24 17:58:15 o51 /bsd: scsibus2 at softraid0: 256 targets
Mar 24 17:58:15 o51 /bsd: root on sd0a (de2e70f906db6d99.a) swap on sd0b dump
on sd0b
Mar 24 17:58:15 o51 /bsd: re0: watchdog timeout
Mar 24 17:58:15 o51 savecore: no core dump
Mar 24 17:58:22 o51 /bsd: re0: watchdog timeout
Mar 24 17:58:48 o51 last message repeated 3 times
Mar 24 17:59:56 o51 last message repeated 3 times
Mar 24 18:00:01 o51 syslogd: restart
Mar 24 18:01:38 o51 /bsd: re0: watchdog timeout
Mar 24 18:01:44 o51 /bsd: re0: watchdog timeout
Mar 24 18:02:51 o51 /bsd: re0: watchdog timeout
Mar 24 18:08:22 o51 last message repeated 23 times
Mar 24 18:43:18 o51 /bsd: re0: watchdog timeout
Mar 24 18:46:20 o51 last message repeated 6 times
Mar 24 19:03:40 o51 last message repeated 28 times

Thanks,

Jay

Reply via email to