5.1/current @ HP EliteBook 8530w. Sometimes during boot, acpitz says
acpitz2: critical temperature exceeded 5424C (56976K), shutting down
and at the end of the booting sequence,
Process (pid 1) got signal 31
It seems to happen more often when running on battery.
The temperature numbers must somehow be absurdly wrong,
unless there really is 5424 degrees. Also, 5424C is not 56976K.
Also, it continues to run fine: it does not shut down even though
it decided to.
The acpidump is available at
http://stare.cz/dmesg/hp-elitebook-8530w.tar.gz
Is there something I should specifically test?
Jan
OpenBSD 5.1-current (GENERIC) #230: Mon Jun 11 12:10:30 MDT 2012
t...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
RTC BIOS diagnostic error bb<clock_battery,config_unit,memory_size,fixed_disk>
cpu0: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz ("GenuineIntel" 686-class)
2.53 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,NXE,LONG,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,LAHF
real mem = 2125709312 (2027MB)
avail mem = 2080153600 (1983MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 11/10/08, SMBIOS rev. 2.4 @ 0x7edbf000
(21 entries)
bios0: vendor Hewlett-Packard version "68PDV Ver. F.06" date 12/15/2008
bios0: Hewlett-Packard HP EliteBook 8530w
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET APIC MCFG TCPA SSDT SLIC SSDT DMAR ASF! SSDT SSDT
SSDT SSDT
acpi0: wakeup devices LANC(S5) HDEF(S4) RP02(S5) WNIC(S5) RP03(S5) ECF0(S5)
RP05(S5) ECF0(S5) RP06(S5) NIC_(S5) USB1(S3) USB2(S3) USB3(S3) USB4(S3)
USB5(S3) USB6(S3) U6RM(S3) EHC1(S3) EHC2(S3) PCIB(S5) HST1(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 266MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 1 (PEGP)
acpiprt1 at acpi0: bus 2 (RP01)
acpiprt2 at acpi0: bus 3 (RP02)
acpiprt3 at acpi0: bus 4 (RP03)
acpiprt4 at acpi0: bus 69 (RP05)
acpiprt5 at acpi0: bus 134 (PCIB)
acpiprt6 at acpi0: bus 0 (PCI0)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpipwrres0 at acpi0: APPR
acpipwrres1 at acpi0: COMP
acpipwrres2 at acpi0: LPP_
acpipwrres3 at acpi0: PGF0
acpitz0 at acpi0: critical temperature is 115 degC
acpitz1 at acpi0: critical temperature is 105 degC
acpitz2 at acpi0: critical temperature is 112 degC
acpitz3 at acpi0: critical temperature is 112 degC
acpitz4 at acpi0: critical temperature is 90 degC
acpitz5 at acpi0: critical temperature is 112 degC
acpibat0 at acpi0: BAT0 model "Primary" serial 34704 2002/12/16 type LIon oem
"Hewlett-Packard"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit offline
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: LID_
acpivideo0 at acpi0: DGFX
acpivout0 at acpivideo0: LCD_
bios0: ROM list: 0xc0000/0xe200 0xce800/0x1000 0xcf800/0x1000
cpu0: Enhanced SpeedStep 2528 MHz: speeds: 2534, 2533, 1600, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
ppb0 at pci0 dev 1 function 0 "Intel GM45 PCIE" rev 0x07: apic 1 int 16
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x065c rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured
pciide0 at pci0 dev 3 function 2 "Intel GM45 PT IDER" rev 0x07: DMA
(unsupported), channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide0: using apic 1 int 18 for native-PCI interrupt
pciide0: channel 0 ignored (not responding; disabled or no drives?)
pciide0: channel 1 ignored (not responding; disabled or no drives?)
puc0 at pci0 dev 3 function 3 "Intel GM45 KT" rev 0x07: ports: 1 com
com3 at puc0 port 0 apic 1 int 17: ns16550a, 16 byte fifo
com3: probed fifo depth: 15 bytes
em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: msi, address
00:23:7d:e7:ac:60
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 16
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 17
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 19
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi
azalia0: codecs: Analog Devices AD1984A, 0x0000/0x0000, using Analog Devices
AD1984A
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 1 int 16
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 1 int 17
pci3 at ppb2 bus 3
iwn0 at pci3 dev 0 function 0 "Intel WiFi Link 5300" rev 0x00: msi, MIMO 3T3R,
MoW, address 00:21:6a:0f:b2:8e
ppb3 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: apic 1 int 18
pci4 at ppb3 bus 4
ppb4 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: apic 1 int 16
pci5 at ppb4 bus 69
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 20
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 22
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 20
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci6 at ppb5 bus 134
sdhc0 at pci6 dev 9 function 0 "Ricoh 5C822 SD/MMC" rev 0x25: apic 1 int 22
sdmmc0 at sdhc0
"Ricoh 5C843 MMC" rev 0x14 at pci6 dev 9 function 1 not configured
"Ricoh 5C592 Memory Stick" rev 0x14 at pci6 dev 9 function 2 not configured
"Ricoh 5C852 xD" rev 0x14 at pci6 dev 9 function 3 not configured
cbb0 at pci6 dev 9 function 4 "Ricoh 5C476 CardBus" rev 0xbb: apic 1 int 22
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 135 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, Hitachi HTS72322, FCDO> SCSI3 0/direct
fixed naa.5000cca583c16d27
sd0: 238475MB, 512 bytes/sector, 488397168 sectors
cd0 at scsibus0 targ 1 lun 0: <HL-DT-ST, DVDRAM GSA-T50L, SC04> ATAPI 5/cdrom
removable
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
"RICOH, Bay8Controller" (manufacturer 0x0, product 0x0) at pcmcia0 function 0
not configured
acpitz2: critical temperature exceeded 5424C (56976K), shutting down
uvideo0 at uhub0 port 5 configuration 1 interface 0 "Chicony Electronics Co.,
Ltd. CKA7216" rev 2.00/32.18 addr 2
video0 at uvideo0
ugen0 at uhub2 port 1 "Broadcom Corp HP Integrated Module" rev 2.00/1.00 addr 2
ugen1 at uhub3 port 1 "AuthenTec Fingerprint Sensor" rev 2.00/17.03 addr 2
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a (2bc64a6c405e47ad.a) swap on sd0b dump on sd0b
Process (pid 1) got signal 31
