Alexey E. Suslikov wrote: > You should try with newer BIOS. Done, as well as the ECP.
Booting now with apm disabled causes OpenBSD to hang on "starting network". The cursor is still blinking, but after 15 minutes it's still stuck there. > Another idea - cardbus isn't hibernating/resuming properly. People > on the list wouldn't like such an advice, but try to boot with ccb > disabled, ZZZ and resume. You meant cbb, right? This causes the system not to hang on boot at least, but it still doesn't wake after ZZZ. Attached is a dmesg with updated BIOS+ECP and disabled apm+cbb. Regards Andre $ dmesg OpenBSD 5.2 (GENERIC) #1: Fri Jul 20 19:05:31 CEST 2012 r...@laptop.stoe.be:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Pentium(R) M processor 1.86GHz ("GenuineIntel" 686-class) 1.87 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,NXE,EST,TM2 real mem = 1072033792 (1022MB) avail mem = 1043660800 (995MB) User Kernel Config UKC> disable ab\^H \^Hpm 351 apm0 disabled UKC> disable cbb 156 cbb* disabled UKC> exit Continuing... mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 08/21/06, BIOS32 rev. 0 @ 0xfd760, SMBIOS rev. 2.33 @ 0xe0010 (64 entries) bios0: vendor IBM version "1YET65WW (1.29 )" date 08/21/2006 bios0: IBM 2668AG2 apm at bios0 function 0x15 not configured acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG BOOT acpi0: wakeup devices LID_(S3) SLPB(S3) UART(S3) EXP0(S4) EXP1(S4) EXP2(S4) EXP3(S4) PCI1(S4) DOCK(S4) USB0(S3) USB1(S3) USB3(S3) USB7(S3) AC9M(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpiec0 at acpi0 acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 133MHz ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 1 acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (AGP_) acpiprt2 at acpi0: bus 2 (EXP0) acpiprt3 at acpi0: bus -1 (EXP1) acpiprt4 at acpi0: bus 3 (EXP2) acpiprt5 at acpi0: bus -1 (EXP3) acpiprt6 at acpi0: bus 11 (PCI1) acpicpu0 at acpi0: C3, C2, C1, PSS acpipwrres0 at acpi0: PUBS acpitz0 at acpi0: critical temperature is 99 degC acpibtn0 at acpi0: LID_ acpibtn1 at acpi0: SLPB acpibat0 at acpi0: BAT0 model "IBM-92P1090" serial 3657 type LION oem "Panasonic" acpibat1 at acpi0: BAT1 not present acpiac0 at acpi0: AC unit online acpithinkpad0 at acpi0 acpidock0 at acpi0: DOCK not docked (0) bios0: ROM list: 0xc0000/0x10000 0xd0000/0x1600 0xd1800/0x1000 0xdc000/0x4000! 0xe0000/0x10000 cpu0: Enhanced SpeedStep 1863 MHz: speeds: 1866, 1600, 1333, 1066, 800 MHz pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x03 ppb0 at pci0 dev 1 function 0 "Intel 82915GM PCIE" rev 0x03: apic 1 int 16 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M300 M22" rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) radeondrm0 at vga1: apic 1 int 16 drm0 at radeondrm0 ppb1 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03: apic 1 int 20 pci2 at ppb1 bus 2 bge0 at pci2 dev 0 function 0 "Broadcom BCM5751M" rev 0x11, BCM5750 B1 (0x4101): apic 1 int 16, address 00:10:c6:e2:b7:92 brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 ppb2 at pci0 dev 28 function 2 "Intel 82801FB PCIE" rev 0x03: apic 1 int 22 pci3 at ppb2 bus 3 uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: apic 1 int 16 uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: apic 1 int 17 uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: apic 1 int 18 uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: apic 1 int 19 ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: apic 1 int 19 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd3 pci4 at ppb3 bus 11 "Ricoh 5C476 CardBus" rev 0x8d at pci4 dev 0 function 0 not configured iwi0 at pci4 dev 2 function 0 "Intel PRO/Wireless 2200BG" rev 0x05: apic 1 int 21, address 00:16:6f:04:c2:e6 auich0 at pci0 dev 30 function 2 "Intel 82801FB AC97" rev 0x03: apic 1 int 22, ICH6 AC97 ac97: codec id 0x41445374 (Analog Devices AD1981B) ac97: codec features headphone, 20 bit DAC, No 3D Stereo audio0 at auich0 "Intel 82801FB Modem" rev 0x03 at pci0 dev 30 function 3 not configured ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x03: PM disabled pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x03: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: <HTS541060G9AT00> wd0: 16-sector PIO, LBA, 57231MB, 117210240 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDR8083N, 0K04> ATAPI 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x03: apic 1 int 23 iic0 at ichiic0 usb1 at uhci0: USB revision 1.0 uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci3: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at ichpcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 wsmouse1 at pms0 mux 0 pms0: Synaptics touchpad, firmware 5.9 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 lpt2 at isa0 port 0x3bc/4: polled aps0 at isa0 port 0x1600/31 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 mtrr: Pentium Pro MTRR support vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets root on wd0a (98d0b835e59425c9.a) swap on wd0b dump on wd0b