What brand, model, and revision is this card? /Joakim
* Alexandre ([EMAIL PROTECTED]) wrote: > Hi again, > > Well, in doubt, I got the latest kernel and the latest userland, in case > there would have been corrections (Thanks Fred) compiled everything and > I still have the > > ath0: bogus xmit rate 0x0 > > Maybe it's due to my card version (AR5213 and not AR5212 as I saw in the > archives), as dmesg writes: > > ath0 at pci0 dev 9 function 0 "Atheros AR5212" rev 0x01: irq 9 > ath0: AR5213 5.6 phy 4.1 rf5111 1.7 rf2111 2.3, FCC2A*, address > 00:09:5b:e8:5f:e9 > > I have the message only when a client (my windows or my PC) connects to > the hotspot. > My client is connected, but no trafic passes (tried ping, tcpdumps and > so on). > > Thanks. > > > Fred Crowson wrote: > >Alexandre wrote: > > > >>Hi all, > >> > >>I have an atheros based card on my OpenBSD 3.8. > >>When I activate it, I have this error message > >> > >>ath0: bogus xmit rate 0x0 > >> > >>coming regurlaly when I try and ping another machine. > >> > >>Here is an extract of my dmesg : > >> > >>ath0 at pci0 dev 9 function 0 "Atheros AR5212" rev 0x01: irq 9 > >>ath0: AR5213 5.6 phy 4.1 rf5111 1.7 rf2111 2.3, FCC2A*, address > >>00:09:5b:e8:5f:e9 > >> > >>My hostname.ath0 is: > >> > >>inet 192.168.1.1 255.255.255.0 NONE media DS11 chan 8 nwid SPEENICS > >>mediaopt hostap > >> > >>The laptop on which I have a wifi card (Netgear WG511) runs either > >>Linux or Windows XP. I just put the adress 192.168.1.2 and I tried a > >>ping from both side, but there is no answer. > >> > >>No wep or PF is used while testing. > >> > >>uname -a gives > >>OpenBOpenBSD hades.olympe.div 3.8 GENERIC#4 i386 > >> > >>Thanks. > >> > > > >Hi, > > > >There have been changes to ath in -current see: > > > >http://marc.theaimsgroup.com/?l=openbsd-misc&m=112867773214527&w=2 > > > >HTH > > > >Fred