this is a fresh install! I couldn't find a CD image for current or did I miss something?
The machine is right now somehow 'isolated' and doesn't have any floppy or serial console attached :( I don't know if its a way to capture the dmesg other than the ones described in: http://openbsd.org/faq/faq4.html#getdmesg The output I included was handed over to me by a colleague of mine and was handwritten! I can include the messages before the 'mpi0 timeout' entry but not everything as I will miss the messages of the first 'screen'! Thanks On Wed, Nov 28, 2012 at 8:31 PM, Tomas Bodzar <tomas.bod...@gmail.com>wrote: > On Wed, Nov 28, 2012 at 6:55 PM, Tony Berth <tonybe...@googlemail.com> > wrote: > > Dear group, > > > > I was trying to install OBSD 5.2 on a Fujitsu-Siemens PRIMERGY RX200 S2 > > (dual CPU) and I get following errors: > > By any chance ability to try current? > > > > > -------------------- > > mpi0: timeout > > mpi0: phys disk Async at 0 MHz width 8bit offset 0 QAS 0 DT 0 IU 0 > > em1 at pci3 dev 6 function 0 "Intel PRO/100MT (82546GB)" rev 0x03: apic 2 > > int 16uvm_fault (0xd07f31d8, 0x0, 0, 1) -> e > > fatal page fault (6) in supervisor mode > > trap type 6 code 0 eip 0 cs 50 eflags 10282 cr2 0 cpl 50 > > panic: trap type 6, code=0, pc=0 > > The operating system has halted > > Please press any key to reboot > > Is there a way for you to get full report? > http://www.openbsd.org/faq/faq2.html#Bugs > > > ------------------- > > > > I aslo saw that the bsd.rd kernel was used during the boot process. > Meaning > > that the smp mode is not used? > > > > Thanks > > > > Tony
