I've been having a very annoying issue with an 82574L for a pretty long
time now.
After the PC is turned off (either properly or due to a power failure),
the NIC does not work upon the next boot.
em0 at pci1 dev 0 function 0 "Intel PRO/1000 MT (82574L)" rev 0x00: msiem0:
The EEPROM Checksum Is Not Valid
em0: Unable to initialize the hardware
I found an Intel firmware flashing utility for DOS that rebuilds the
checksum. After running it, however, my MAC is 00:00:00:00:00:00. I
need to set the mac back with it, and make it rebuild the checksum.
After I do this, OpenBSD boots fine:
em0 at pci1 dev 0 function 0 "Intel PRO/1000 MT (82574L)" rev 0x00: msi,
address 00:22:4d:7c:b2:76
The NIC is an onboard one, and I've no extra PCI slots, so I can't
really change it.
Here's my full dmesg in case it's of further use.
Please also let me know if there's anything else which may be of use.
OpenBSD 5.2-current (GENERIC.MP) #5: Wed Dec 12 23:22:46 MST 2012
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4275666944 (4077MB)
avail mem = 4139347968 (3947MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xeb920 (27 entries)
bios0: vendor Intel Corp. version "MUCDT10N.86A.0072.2012.0808.1512" date
08/08/2012
bios0: Intel Corporation D2700MUD
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT APIC MCFG HPET
acpi0: wakeup devices SLT1(S4) PS2M(S4) PS2K(S4) UAR1(S3) UAR2(S3) USB0(S3)
USB1(S3) USB2(S3) USB3(S3) USB7(S3) PXSX(S4) RP01(S4) PXSX(S4) RP02(S4)
PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PWRB(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Atom(TM) CPU D2700 @ 2.13GHz, 2133.73 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,
CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF,ITSC
cpu0: 512KB 64b/line 8-way L2 cache
cpu0: apic clock running at 133MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Atom(TM) CPU D2700 @ 2.13GHz, 2133.41 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,
CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF,ITSC
cpu1: 512KB 64b/line 8-way L2 cache
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Atom(TM) CPU D2700 @ 2.13GHz, 2133.41 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,
CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF,ITSC
cpu2: 512KB 64b/line 8-way L2 cache
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Atom(TM) CPU D2700 @ 2.13GHz, 2133.41 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,
CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF,ITSC
cpu3: 512KB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (P0P1)
acpiprt2 at acpi0: bus 1 (RP01)
acpiprt3 at acpi0: bus -1 (RP02)
acpiprt4 at acpi0: bus -1 (RP03)
acpiprt5 at acpi0: bus -1 (RP04)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpicpu2 at acpi0
acpicpu3 at acpi0
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: SLPB
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD02
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x0bf3 rev
0x03
vga1 at pci0 dev 2 function 0 vendor "Intel", unknown product 0x0be2 rev 0x09
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp at vga1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi
azalia0: codecs: Realtek ALC662
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: msi
pci1 at ppb0 bus 1
em0 at pci1 dev 0 function 0 "Intel PRO/1000 MT (82574L)" rev 0x00: msi,
address 00:22:4d:7c:b2:76
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 8 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 8 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 8 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 8 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 8 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 "Realtek 8169" rev 0x10: RTL8169/8110SB (0x1000),
apic 8 int 20, address 00:e0:52:c6:52:c3
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 3
pcib0 at pci0 dev 31 function 0 "Intel NM10 LPC" rev 0x02
ahci0 at pci0 dev 31 function 2 "Intel 82801GR AHCI" rev 0x02: msi, AHCI 1.1
scsibus0 at ahci0: 32 targets
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 8 int
19
iic0 at ichiic0
lm1 at iic0 addr 0x2d: W83627DHG
spdmem0 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: W83627DHG-P rev 0x73
lm2 at wbsio0 port 0x290/8: W83627DHG
mtrr: Pentium Pro MTRR support
lm1: disabling sensors due to alias with lm2
umass0 at uhub0 port 3 configuration 1 interface 0 "Generic USB2.0-CRW" rev
2.00/19.81 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <Generic-, SD/MMC, 1.00> SCSI0 0/direct
removable serial.0bda0119815198100000
sd0: 3789MB, 512 bytes/sector, 7759872 sectors
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (7b2cce8455053ae6.a) swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
re0: watchdog timeout
re0: watchdog timeout
--
Hugo Osvaldo Barrera
