On 2013-03-20 20:37, Hugo Osvaldo Barrera wrote: > I've been having a very annoying issue with an 82574L for a pretty long > time now. > > After the PC is turned off (either properly or due to a power failure), > the NIC does not work upon the next boot. > > em0 at pci1 dev 0 function 0 "Intel PRO/1000 MT (82574L)" rev 0x00: msiem0: > The EEPROM Checksum Is Not Valid > em0: Unable to initialize the hardware > > I found an Intel firmware flashing utility for DOS that rebuilds the > checksum. After running it, however, my MAC is 00:00:00:00:00:00. I > need to set the mac back with it, and make it rebuild the checksum. > > After I do this, OpenBSD boots fine: > > em0 at pci1 dev 0 function 0 "Intel PRO/1000 MT (82574L)" rev 0x00: msi, > address 00:22:4d:7c:b2:76 > > The NIC is an onboard one, and I've no extra PCI slots, so I can't > really change it. > > Here's my full dmesg in case it's of further use. > Please also let me know if there's anything else which may be of use. > > OpenBSD 5.2-current (GENERIC.MP) #5: Wed Dec 12 23:22:46 MST 2012 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 4275666944 (4077MB) > avail mem = 4139347968 (3947MB) > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xeb920 (27 entries) > bios0: vendor Intel Corp. version "MUCDT10N.86A.0072.2012.0808.1512" date > 08/08/2012 > bios0: Intel Corporation D2700MUD > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP SSDT APIC MCFG HPET > acpi0: wakeup devices SLT1(S4) PS2M(S4) PS2K(S4) UAR1(S3) UAR2(S3) USB0(S3) > USB1(S3) USB2(S3) USB3(S3) USB7(S3) PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) > PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PWRB(S4) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Atom(TM) CPU D2700 @ 2.13GHz, 2133.73 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS > H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3, > CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF,ITSC > cpu0: 512KB 64b/line 8-way L2 cache > cpu0: apic clock running at 133MHz > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Atom(TM) CPU D2700 @ 2.13GHz, 2133.41 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS > H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3, > CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF,ITSC > cpu1: 512KB 64b/line 8-way L2 cache > cpu2 at mainbus0: apid 2 (application processor) > cpu2: Intel(R) Atom(TM) CPU D2700 @ 2.13GHz, 2133.41 MHz > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS > H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3, > CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF,ITSC > cpu2: 512KB 64b/line 8-way L2 cache > cpu3 at mainbus0: apid 3 (application processor) > cpu3: Intel(R) Atom(TM) CPU D2700 @ 2.13GHz, 2133.41 MHz > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS > H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3, > CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF,ITSC > cpu3: 512KB 64b/line 8-way L2 cache > ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins > ioapic0: misconfigured as apic 0, remapped to apid 8 > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-63 > acpihpet0 at acpi0: 14318179 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 2 (P0P1) > acpiprt2 at acpi0: bus 1 (RP01) > acpiprt3 at acpi0: bus -1 (RP02) > acpiprt4 at acpi0: bus -1 (RP03) > acpiprt5 at acpi0: bus -1 (RP04) > acpicpu0 at acpi0 > acpicpu1 at acpi0 > acpicpu2 at acpi0 > acpicpu3 at acpi0 > acpibtn0 at acpi0: PWRB > acpibtn1 at acpi0: SLPB > acpivideo0 at acpi0: GFX0 > acpivout0 at acpivideo0: DD02 > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x0bf3 rev > 0x03 > vga1 at pci0 dev 2 function 0 vendor "Intel", unknown product 0x0be2 rev 0x09 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > intagp at vga1 not configured > azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi > azalia0: codecs: Realtek ALC662 > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: msi > pci1 at ppb0 bus 1 > em0 at pci1 dev 0 function 0 "Intel PRO/1000 MT (82574L)" rev 0x00: msi, > address 00:22:4d:7c:b2:76 > uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 8 int 23 > uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 8 int 19 > uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 8 int 18 > uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 8 int 16 > ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 8 int 23 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2 > pci2 at ppb1 bus 2 > re0 at pci2 dev 0 function 0 "Realtek 8169" rev 0x10: RTL8169/8110SB (0x1000), > apic 8 int 20, address 00:e0:52:c6:52:c3 > rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 3 > pcib0 at pci0 dev 31 function 0 "Intel NM10 LPC" rev 0x02 > ahci0 at pci0 dev 31 function 2 "Intel 82801GR AHCI" rev 0x02: msi, AHCI 1.1 > scsibus0 at ahci0: 32 targets > ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 8 int > 19 > iic0 at ichiic0 > lm1 at iic0 addr 0x2d: W83627DHG > spdmem0 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600 SO-DIMM > usb1 at uhci0: USB revision 1.0 > uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb2 at uhci1: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci2: USB revision 1.0 > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb4 at uhci3: USB revision 1.0 > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > wbsio0 at isa0 port 0x2e/2: W83627DHG-P rev 0x73 > lm2 at wbsio0 port 0x290/8: W83627DHG > mtrr: Pentium Pro MTRR support > lm1: disabling sensors due to alias with lm2 > umass0 at uhub0 port 3 configuration 1 interface 0 "Generic USB2.0-CRW" rev > 2.00/19.81 addr 2 > umass0: using SCSI over Bulk-Only > scsibus1 at umass0: 2 targets, initiator 0 > sd0 at scsibus1 targ 1 lun 0: <Generic-, SD/MMC, 1.00> SCSI0 0/direct > removable serial.0bda0119815198100000 > sd0: 3789MB, 512 bytes/sector, 7759872 sectors > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > root on sd0a (7b2cce8455053ae6.a) swap on sd0b dump on sd0b > WARNING: / was not properly unmounted > re0: watchdog timeout > re0: watchdog timeout > > -- > Hugo Osvaldo Barrera > > [demime 1.01d removed an attachment of type application/pgp-signature] >
No ideas? Or have I missing something so obvious nobody's willing to point it out? -- Hugo Osvaldo Barrera [demime 1.01d removed an attachment of type application/pgp-signature]
