Thanks, just asked to make sure something don't overlooked ;)
2013/6/18 Chris Cappuccio <ch...@nmedia.net> > bwi is incomplete due to a lack of vendor documentation > > there may be improvement in dragonflybsd that is worth porting over, or > you may get lucky, stick the PCI device ID for your card into the bwi > driver, and see that it otherwise works... > > your best bet may be to buy a better supported mini-pcie card and install > it! > > Tori Mus [torimus...@gmail.com] wrote: > > Hi, > > > > just installed OpenBSD-current and most of things do work out of box. > > However Broadcom's wireless card BCM4313 does appear in dmesg output as > > properly detected but not initialized/configured: > > > > ---- snip ---- > > pci2 at ppb1 bus 2 > > "Broadcom BCM4313" rev 0x01 at pci2 dev 0 function 0 not configured > > ---- snip ---- > > > > Ifconfig does not list this card. (bwi?) expected. > > Even tried if the missing firmware is the cause, but fw_update only > fetched > > firmware for a webcam. > > > > Just asking if this type of card is not (yet) supported even in the > current > > branch and have to buy some external on usb stick. > > > > Thanks. > > > > Tori > > -- > I'm not being defensive. Maybe you're the one > that's being defensive. Maybe you should look > at yourself once in awhile.