On Mon, Sep 02, 2013 at 08:20:11AM -0400, John Hynes wrote: > On Mon, Sep 2, 2013 at 8:07 AM, Kenneth R Westerback <kwesterb...@rogers.com > > wrote: > > > On Mon, Sep 02, 2013 at 07:50:41AM -0400, John Hynes wrote: > > > Greetings All, > > > > > > I have a softraid device, sd3, which was created as follows: > > > > > > bioctl -c 1 -l /dev/sd0a,/dev/sd1a,/dev/sd2a softraid0 > > > > > > The chunk sd2a failed. bioctl shows the RAID1 as degraded, and chunk > > sd2a > > > as OFFLINE. > > > > > > In order to rebuild, I'd need to set up the new sd2. After replacing and > > > zeroing the drive, I replaced the MBR with fdisk -yi /dev/sd2, which > > worked > > > fine. Next, I copied the disklabel from sd0 to sd2, but disklabel > > refused > > > to write the new label, saying: > > > > > > disklabel: ioctl DIOCWDINFO: Open partition would move or shrink > > > disklabel: unable to write label > > > > How exactly are you copying the disklabel? Is sd2 the same size as sd0? > > > > disklabel sd0 > disklabel.sd2; disklabel -R sd2 disklabel.sd0 > > The "new" sd2 is identical to the old, which is identical to the other > disks.
Then the output from 'disklabel sd0', 'disklabel sd2', 'fdisk sd0' and 'fdisk sd2' would be useful. I suspect the 'c' partition location/size is the cause of the confusion. I thought 'c' was ignored by '-R', but a quick glance at the code does not support that. :-) .... Ken > > > > > > As always a dmesg would help. In this case by answering the latter. :-) > > > > Here's the dmesg from earlier, before the drive croaked: > > OpenBSD 5.3 (GENERIC.MP) #0: Thu Aug 15 09:24:05 EDT 2013 > r...@flotsam.primebuchholz.com:/usr/src/sys/arch/amd64/compile/ > GENERIC.MP > real mem = 17160536064 (16365MB) > avail mem = 16681234432 (15908MB) > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.6 @ 0x9f000 (40 entries) > bios0: vendor American Megatrends Inc. version "3.0a" date 05/07/2013 > bios0: Supermicro H8SGL > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S1 S4 S5 > acpi0: tables DSDT FACP APIC MCFG OEMB HPET SRAT SSDT EINJ BERT ERST HEST > acpi0: wakeup devices PC02(S4) PC03(S4) PC04(S4) PC05(S4) PC06(S4) PC07(S4) > PC09(S4) PC0A(S4) PC0B(S4) PC0C(S4) SBAZ(S4) PSKE(S4) PSMS(S4) ECIR(S4) > P0PC(S4) UHC1(S4) UHC2(S4) UHC3(S4) USB4(S4) UHC5(S4) UHC6(S4) UHC7(S4) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 32 (boot processor) > cpu0: AMD Opteron(tm) Processor 6344 , 2600.38 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,NODEID,TBM,TOPEXT,ITSC,BMI1 > cpu0: 64KB 64b/line 2-way I-cache, 16KB 64b/line 4-way D-cache, 2MB > 64b/line 16-way L2 cache, 12MB 64b/line 128-way L3 cache > cpu0: ITLB 48 4KB entries fully associative, 24 4MB entries fully > associative > cpu0: DTLB 64 4KB entries fully associative, 64 4MB entries fully > associative > cpu0: apic clock running at 199MHz > cpu1 at mainbus0: apid 33 (application processor) > cpu1: AMD Opteron(tm) Processor 6344 , 249.48 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,NODEID,TBM,TOPEXT,ITSC,BMI1 > cpu1: 64KB 64b/line 2-way I-cache, 16KB 64b/line 4-way D-cache, 2MB > 64b/line 16-way L2 cache, 12MB 64b/line 128-way L3 cache > cpu1: ITLB 48 4KB entries fully associative, 24 4MB entries fully > associative > cpu1: DTLB 64 4KB entries fully associative, 64 4MB entries fully > associative > cpu2 at mainbus0: apid 34 (application processor) > cpu2: AMD Opteron(tm) Processor 6344 , 249.45 MHz > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,NODEID,TBM,TOPEXT,ITSC,BMI1 > cpu2: 64KB 64b/line 2-way I-cache, 16KB 64b/line 4-way D-cache, 2MB > 64b/line 16-way L2 cache, 12MB 64b/line 128-way L3 cache > cpu2: ITLB 48 4KB entries fully associative, 24 4MB entries fully > associative > cpu2: DTLB 64 4KB entries fully associative, 64 4MB entries fully > associative > cpu3 at mainbus0: apid 35 (application processor) > cpu3: AMD Opteron(tm) Processor 6344 , 249.47 MHz > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,NODEID,TBM,TOPEXT,ITSC,BMI1 > cpu3: 64KB 64b/line 2-way I-cache, 16KB 64b/line 4-way D-cache, 2MB > 64b/line 16-way L2 cache, 12MB 64b/line 128-way L3 cache > cpu3: ITLB 48 4KB entries fully associative, 24 4MB entries fully > associative > cpu3: DTLB 64 4KB entries fully associative, 64 4MB entries fully > associative > cpu4 at mainbus0: apid 36 (application processor) > cpu4: AMD Opteron(tm) Processor 6344 , 249.45 MHz > cpu4: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,NODEID,TBM,TOPEXT,ITSC,BMI1 > cpu4: 64KB 64b/line 2-way I-cache, 16KB 64b/line 4-way D-cache, 2MB > 64b/line 16-way L2 cache, 12MB 64b/line 128-way L3 cache > cpu4: ITLB 48 4KB entries fully associative, 24 4MB entries fully > associative > cpu4: DTLB 64 4KB entries fully associative, 64 4MB entries fully > associative > cpu5 at mainbus0: apid 37 (application processor) > cpu5: AMD Opteron(tm) Processor 6344 , 249.47 MHz > cpu5: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,NODEID,TBM,TOPEXT,ITSC,BMI1 > cpu5: 64KB 64b/line 2-way I-cache, 16KB 64b/line 4-way D-cache, 2MB > 64b/line 16-way L2 cache, 12MB 64b/line 128-way L3 cache > cpu5: ITLB 48 4KB entries fully associative, 24 4MB entries fully > associative > cpu5: DTLB 64 4KB entries fully associative, 64 4MB entries fully > associative > cpu6 at mainbus0: apid 38 (application processor) > cpu6: AMD Opteron(tm) Processor 6344 , 249.70 MHz > cpu6: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,NODEID,TBM,TOPEXT,ITSC,BMI1 > cpu6: 64KB 64b/line 2-way I-cache, 16KB 64b/line 4-way D-cache, 2MB > 64b/line 16-way L2 cache, 12MB 64b/line 128-way L3 cache > cpu6: ITLB 48 4KB entries fully associative, 24 4MB entries fully > associative > cpu6: DTLB 64 4KB entries fully associative, 64 4MB entries fully > associative > cpu7 at mainbus0: apid 39 (application processor) > cpu7: AMD Opteron(tm) Processor 6344 , 249.47 MHz > cpu7: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,NODEID,TBM,TOPEXT,ITSC,BMI1 > cpu7: 64KB 64b/line 2-way I-cache, 16KB 64b/line 4-way D-cache, 2MB > 64b/line 16-way L2 cache, 12MB 64b/line 128-way L3 cache > cpu7: ITLB 48 4KB entries fully associative, 24 4MB entries fully > associative > cpu7: DTLB 64 4KB entries fully associative, 64 4MB entries fully > associative > cpu8 at mainbus0: apid 40 (application processor) > cpu8: AMD Opteron(tm) Processor 6344 , 249.70 MHz > cpu8: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,NODEID,TBM,TOPEXT,ITSC,BMI1 > cpu8: 64KB 64b/line 2-way I-cache, 16KB 64b/line 4-way D-cache, 2MB > 64b/line 16-way L2 cache, 12MB 64b/line 128-way L3 cache > cpu8: ITLB 48 4KB entries fully associative, 24 4MB entries fully > associative > cpu8: DTLB 64 4KB entries fully associative, 64 4MB entries fully > associative > cpu9 at mainbus0: apid 41 (application processor) > cpu9: AMD Opteron(tm) Processor 6344 , 249.46 MHz > cpu9: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,NODEID,TBM,TOPEXT,ITSC,BMI1 > cpu9: 64KB 64b/line 2-way I-cache, 16KB 64b/line 4-way D-cache, 2MB > 64b/line 16-way L2 cache, 12MB 64b/line 128-way L3 cache > cpu9: ITLB 48 4KB entries fully associative, 24 4MB entries fully > associative > cpu9: DTLB 64 4KB entries fully associative, 64 4MB entries fully > associative > cpu10 at mainbus0: apid 42 (application processor) > cpu10: AMD Opteron(tm) Processor 6344 , 249.70 MHz > cpu10: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,NODEID,TBM,TOPEXT,ITSC,BMI1 > cpu10: 64KB 64b/line 2-way I-cache, 16KB 64b/line 4-way D-cache, 2MB > 64b/line 16-way L2 cache, 12MB 64b/line 128-way L3 cache > cpu10: ITLB 48 4KB entries fully associative, 24 4MB entries fully > associative > cpu10: DTLB 64 4KB entries fully associative, 64 4MB entries fully > associative > cpu11 at mainbus0: apid 43 (application processor) > cpu11: AMD Opteron(tm) Processor 6344 , 249.47 MHz > cpu11: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,NODEID,TBM,TOPEXT,ITSC,BMI1 > cpu11: 64KB 64b/line 2-way I-cache, 16KB 64b/line 4-way D-cache, 2MB > 64b/line 16-way L2 cache, 12MB 64b/line 128-way L3 cache > cpu11: ITLB 48 4KB entries fully associative, 24 4MB entries fully > associative > cpu11: DTLB 64 4KB entries fully associative, 64 4MB entries fully > associative > ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 21, 24 pins > ioapic1 at mainbus0: apid 1 pa 0xfec20000, version 21, 32 pins > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 > acpihpet0 at acpi0: 14318180 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus -1 (PC02) > acpiprt2 at acpi0: bus -1 (PC03) > acpiprt3 at acpi0: bus -1 (PC04) > acpiprt4 at acpi0: bus 1 (PC09) > acpiprt5 at acpi0: bus 2 (PC0A) > acpiprt6 at acpi0: bus 3 (P0PC) > acpicpu0 at acpi0: C2, PSS > acpicpu1 at acpi0: C2, PSS > acpicpu2 at acpi0: C2, PSS > acpicpu3 at acpi0: C2, PSS > acpicpu4 at acpi0: C2, PSS > acpicpu5 at acpi0: C2, PSS > acpicpu6 at acpi0: C2, PSS > acpicpu7 at acpi0: C2, PSS > acpicpu8 at acpi0: C2, PSS > acpicpu9 at acpi0: C2, PSS > acpicpu10 at acpi0: C2, PSS > acpicpu11 at acpi0: C2, PSS > acpibtn0 at acpi0: PWRB > ipmi at mainbus0 not configured > cpu0: 2600 MHz: speeds: 2600 2300 2000 1700 1400 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "ATI SR5650 Host" rev 0x02 > ppb0 at pci0 dev 9 function 0 "ATI SR5690 PCIE" rev 0x00: msi > pci1 at ppb0 bus 1 > em0 at pci1 dev 0 function 0 "Intel PRO/1000 MT (82574L)" rev 0x00: msi, > address 00:25:90:85:85:a0 > ppb1 at pci0 dev 10 function 0 "ATI SR5690 PCIE" rev 0x00: msi > pci2 at ppb1 bus 2 > em1 at pci2 dev 0 function 0 "Intel PRO/1000 MT (82574L)" rev 0x00: msi, > address 00:25:90:85:85:a1 > ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 0 int 22, > AHCI 1.1 > scsibus0 at ahci0: 32 targets > sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD5003ABYX-0, 01.0> SCSI3 0/direct > fixed naa.50014ee058e7c163 > sd0: 476940MB, 512 bytes/sector, 976773168 sectors > sd1 at scsibus0 targ 1 lun 0: <ATA, WDC WD5003ABYX-0, 01.0> SCSI3 0/direct > fixed naa.50014ee003928dd3 > sd1: 476940MB, 512 bytes/sector, 976773168 sectors > sd2 at scsibus0 targ 2 lun 0: <ATA, WDC WD5003ABYX-0, 01.0> SCSI3 0/direct > fixed naa.50014ee0ae3d5a56 > sd2: 476940MB, 512 bytes/sector, 976773168 sectors > ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 0 int 16, > version 1.0, legacy support > ohci1 at pci0 dev 18 function 1 "ATI SB700 USB" rev 0x00: apic 0 int 16, > version 1.0, legacy support > ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 0 int 17 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1 > ohci2 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 0 int 18, > version 1.0, legacy support > ohci3 at pci0 dev 19 function 1 "ATI SB700 USB" rev 0x00: apic 0 int 18, > version 1.0, legacy support > ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 0 int 19 > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1 > piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x3d: SMI > iic0 at piixpm0 > iic0: addr 0x19 05=c1 07=29 words 00=006f 01=0000 02=0000 03=0000 04=0000 > 05=c1b0 06=00b3 07=2912 > iic0: addr 0x1b 05=c1 07=29 words 00=006f 01=0000 02=0000 03=0000 04=0000 > 05=c1a4 06=00b3 07=2912 > iic0: addr 0x1d 05=c1 07=29 words 00=006f 01=0000 02=0000 03=0000 04=0000 > 05=c1b0 06=00b3 07=2912 > iic0: addr 0x1f 05=c1 07=29 words 00=006f 01=0000 02=0000 03=0000 04=0000 > 05=c1a8 06=00b3 07=2912 > nvt0 at iic0 addr 0x2f: W83795G > spdmem0 at iic0 addr 0x51: 4GB DDR3 SDRAM registered ECC PC3-12800 with > thermal sensor > "eeprom" at iic0 addr 0x53 not configured > spdmem1 at iic0 addr 0x57: 4GB DDR3 SDRAM registered ECC PC3-12800 with > thermal sensor > pciide0 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x00: DMA, channel 0 > configured to compatibility, channel 1 configured to compatibility > pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x00 > ppb2 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00 > pci3 at ppb2 bus 3 > vga1 at pci3 dev 4 function 0 "Matrox MGA G200eW" rev 0x0a > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > ohci4 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 0 int 18, > version 1.0, legacy support > pchb1 at pci0 dev 24 function 0 vendor "AMD", unknown product 0x1600 rev > 0x00 > pchb2 at pci0 dev 24 function 1 vendor "AMD", unknown product 0x1601 rev > 0x00 > pchb3 at pci0 dev 24 function 2 vendor "AMD", unknown product 0x1602 rev > 0x00 > pchb4 at pci0 dev 24 function 3 vendor "AMD", unknown product 0x1603 rev > 0x00 > pchb5 at pci0 dev 24 function 4 vendor "AMD", unknown product 0x1604 rev > 0x00 > pchb6 at pci0 dev 24 function 5 vendor "AMD", unknown product 0x1605 rev > 0x00 > pchb7 at pci0 dev 25 function 0 vendor "AMD", unknown product 0x1600 rev > 0x00 > pchb8 at pci0 dev 25 function 1 vendor "AMD", unknown product 0x1601 rev > 0x00 > pchb9 at pci0 dev 25 function 2 vendor "AMD", unknown product 0x1602 rev > 0x00 > pchb10 at pci0 dev 25 function 3 vendor "AMD", unknown product 0x1603 rev > 0x00 > pchb11 at pci0 dev 25 function 4 vendor "AMD", unknown product 0x1604 rev > 0x00 > pchb12 at pci0 dev 25 function 5 vendor "AMD", unknown product 0x1605 rev > 0x00 > usb2 at ohci0: USB revision 1.0 > uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > usb3 at ohci1: USB revision 1.0 > uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > usb4 at ohci2: USB revision 1.0 > uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > usb5 at ohci3: USB revision 1.0 > uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > wbsio0 at isa0 port 0x2e/2: W83627DHG-P rev 0x73 > wbsio0 port 0xa10/2 not configured > usb6 at ohci4: USB revision 1.0 > uhub6 at usb6 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > mtrr: Pentium Pro MTRR support > umass0 at uhub1 port 1 configuration 1 interface 0 "Genesys Logic USB > Storage" rev 2.00/0.16 addr 2 > umass0: using SCSI over Bulk-Only > scsibus1 at umass0: 2 targets, initiator 0 > cd0 at scsibus1 targ 1 lun 0: <TEAC, DV-28S-Y, 1.4A> SCSI0 5/cdrom > removable serial.05e30719000000000033 > uhidev0 at uhub4 port 3 configuration 1 interface 0 "Winbond Electronics > Corp Hermon USB hidmouse Device" rev 1.10/0.01 addr 2 > uhidev0: iclass 3/1 > ums0 at uhidev0: 3 buttons, Z dir > wsmouse0 at ums0 mux 0 > uhidev1 at uhub4 port 3 configuration 1 interface 1 "Winbond Electronics > Corp Hermon USB hidmouse Device" rev 1.10/0.01 addr 2 > uhidev1: iclass 3/1 > ukbd0 at uhidev1: 8 variable keys, 6 key codes > wskbd1 at ukbd0 mux 1 > wskbd1: connecting to wsdisplay0 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > sd3 at scsibus3 targ 1 lun 0: <OPENBSD, SR RAID 1, 005> SCSI2 0/direct fixed > sd3: 476937MB, 512 bytes/sector, 976767473 sectors > root on sd3a (17a020a06096df1a.a) swap on sd3b dump on sd3b > > > > > > .... Ken > > > > > > > > I could use another slot I suppose, but is there a way to label the chunk > > > in the same slot and rebuild onto it that I'm missing? > > > > > > Thanks, > > > > > > -John > > > > > > > > > On Mon, Sep 2, 2013 at 8:07 AM, Kenneth R Westerback <kwesterb...@rogers.com > > wrote: > > > On Mon, Sep 02, 2013 at 07:50:41AM -0400, John Hynes wrote: > > > Greetings All, > > > > > > I have a softraid device, sd3, which was created as follows: > > > > > > bioctl -c 1 -l /dev/sd0a,/dev/sd1a,/dev/sd2a softraid0 > > > > > > The chunk sd2a failed. bioctl shows the RAID1 as degraded, and chunk > > sd2a > > > as OFFLINE. > > > > > > In order to rebuild, I'd need to set up the new sd2. After replacing and > > > zeroing the drive, I replaced the MBR with fdisk -yi /dev/sd2, which > > worked > > > fine. Next, I copied the disklabel from sd0 to sd2, but disklabel > > refused > > > to write the new label, saying: > > > > > > disklabel: ioctl DIOCWDINFO: Open partition would move or shrink > > > disklabel: unable to write label > > > > How exactly are you copying the disklabel? Is sd2 the same size as sd0? > > > > As always a dmesg would help. In this case by answering the latter. :-) > > > > .... Ken > > > > > > > > I could use another slot I suppose, but is there a way to label the chunk > > > in the same slot and rebuild onto it that I'm missing? > > > > > > Thanks, > > > > > > -John