I apologize - it hadn't occurred to me that I could use a thumb drive to
transport a dmesg. Bad hacker! Lose 10 hacker points!
I tried installing without configuring network, which was successful,
however once I tried to ifconfig bge0 ("ifconfig bge0 192.168.x.x. netmask
255.255.255.0 broadcast 192.168.x.255") the console session hung.
Here is the dmesg...had to hunt for a USB port that didn't "device problem,
disabling" but found one:
OpenBSD 5.3 (RAMDISK_CD) #49: Tue Mar 12 18:50:37 MDT 2013
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Celeron(R) M processor 1.50GHz ("GenuineIntel" 686-class)
1.51 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,NXE,PERF
real mem = 2138566656 (2039MB)
avail mem = 2095865856 (1998MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/24/06, BIOS32 rev. 0 @ 0xfa410,
SMBIOS rev. 2.2 @ 0xf0000 (39 entries)
bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 03/24/2006
bios0: Shuttle Inc SD11V10
apm0 at bios0: Power Management spec V1.2
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 3.0 @ 0xf0000/0xd1b4
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfd0d0/176 (9 entries)
pcibios0: bad IRQ table checksum
pcibios0: PCI BIOS has 12 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 3 4 5 7 10 11
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FBM LPC" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0xe800! 0xd0000/0x8000! 0xd8000/0x1000
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x04
vga1 at pci0 dev 2 function 0 "Intel 82915GM Video" rev 0x04
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x04: irq 5
pci1 at ppb0 bus 1
bge0 at pci1 dev 0 function 0 "Broadcom BCM5789" rev 0x11, BCM5750 B1
(0x4101): irq 10, address 00:30:1b:ba:c5:c0
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb1 at pci0 dev 28 function 2 "Intel 82801FB PCIE" rev 0x04: irq 7
pci2 at ppb1 bus 2
em0 at pci2 dev 0 function 0 "Intel PRO/1000 MT (82574L)" rev 0x00:
couldn't map interrupt
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x04: irq 4
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x04: irq 11
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x04: irq 7
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x04: irq 5
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x04: irq 4
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd4
pci3 at ppb2 bus 3
"Creative Labs SoundBlaster Audigy LS" rev 0x00 at pci3 dev 9 function 0
not configured
"VIA VT6306 FireWire" rev 0x80 at pci3 dev 10 function 0 not configured
pcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x04
pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x04: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD3200AAKS-00UU3A0>
wd0: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
wd1 at pciide0 channel 0 drive 1: <WDC WD3200AAKS-22L6A0>
wd1: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 6
"Intel 82801FB SMBus" rev 0x04 at pci0 dev 31 function 3 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
umass0 at uhub0 port 4 configuration 1 interface 0 "USB2.0 External Mass
Storage Device" rev 2.00/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, initiator 0
cd0 at scsibus0 targ 1 lun 0: <Slimtype, eTAU208 2, ML07> SCSI0 5/cdrom
removable serial.1c6ba2224000000004F7
uhidev0 at uhub2 port 1 configuration 1 interface 0 "Logitech USB-PS/2
Trackball" rev 1.00/2.10 addr 2
uhidev0: iclass 3/1
uhid at uhidev0 not configured
softraid0 at root
scsibus1 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
uhub0: device problem, disabling port 8
uhub0: port 7, set config at addr 3 failed
uhub0: device problem, disabling port 7
uhidev0 detached
umass1 at uhub0 port 3 configuration 1 interface 0 "Kingston DataTraveler
2.0" rev 2.00/1.00 addr 3
umass1: using SCSI over Bulk-Only
scsibus2 at umass1: 2 targets, initiator 0
sd0 at scsibus2 targ 1 lun 0: <Kingston, DataTraveler 2.0, 1.00> SCSI2
0/direct removable serial.09511665FD71298131ED
sd0: 7388MB, 512 bytes/sector, 15131636 sectors
