Hi Stuart, Le 08/04/2014 18:31, Stuart Henderson a écrit : > On 2014-04-07, Christophe <t...@stuxnet.org> wrote: > [..] > > Let's ignore the siproxd side of things and just look at the ruleset. > > You have no "pass" or "block" rules for any outbound traffic so the implicit > default is used for outbound traffic - this is "pass all no state" - I would > start the ruleset with an explicit "block" and then perhaps "pass out" if > that's what you want. >
Oops, true ! I made a `grep -v` mistake ... Sorry :( . Here is the real ruleset, that effectively contains block and pass "default" rules. > set skip on lo > set loginterface pflog0 > > block in log > pass out > > block in on ! lo0 proto tcp to port 6000:6010 > > match out log on em0 inet from 172.18.160.0/24 to any nat-to em0 > > pass in on em1 inet proto tcp from 172.18.160/24 to any port { 80, 443 } keep > state > pass in on em1 inet proto icmp from 172.18.160.0/24 to any keep state > > pass in on em0 inet proto tcp from any to em0 port 22 keep state > pass in on em0 inet proto icmp from any to em0 keep state > > pass in log on em1 inet proto udp from 172.18.160.0/24 to any port 5060 > divert-to 172.18.160.253 port 5060 > > pass in on em0 inet proto udp from any to em0 port 5060 keep state > pass in on em0 inet proto udp from any to em0 port 17030:17080 keep state Regards, Christophe.