On 2.5.2014. 14:54, thors...@bonck.net wrote: > Under 5.4-stable, following configuration sets up a working connection > for me: > > /etc/hostname.pppoe0: > > inet 0.0.0.0 255.255.255.255 NONE \ > pppoedev vlan10 authproto pap \ > authname 'XXX' authkey 'YYY' up > dest 0.0.0.1 > !/sbin/route add default -ifp pppoe0 0.0.0.1 > #eof > > /etc/hostname.vlan10: > > vlan 10 vlandev rl0 up > #eof > > /etc/hostname.rl0: > > up lladdr 12:34:56:78:90:ab > #needed for assignment of 'static' IP > #eof > > Having installed OpenBSD-5.5 amd64 the exact same configuration does > not succeed in setting up a working network connection. > > I set the 'debug' flag for pppoe0 so I could see what happened: > pppoe(8863) state=1, session=0x0 output -> ff:ff:ff:ff:ff:ff, len=18 > pppoe(8863) state=2, session=0x0 output -> aa:aa:aa:aa:aa:aa, len=42 > pppoe0: timeout > [...] > aa:aa:aa:aa:aa:aa is a MAC I do not know. > > To further check for errors, I booted a working 5.4 installation and > used tcpdump on vlan10 before restarting the pppoe interface. > As expected, I get only one PADO after sending the PADI. > This PADO is received from a well known MAC. > > From here on, everything just works using the 5.4 installation. > On 5.5, until this point (PADI sent/PADO received) there is no > difference. > > For 5.4, the PADR is sent to MAC which sent PADO. > For 5.5, the PADR is sent to some other MAC I do not know. > There was neither a PADO sent from that MAC nor is there any other > occurence of that MAC in the tcpdump besides being target of PADR. > > In both installations, the PADO is sent from the same MAC. > Service-Name, AC-Cookie and Host-Uniq do match. > > Interestingly, the PADR to the unknown MAC includes the same AC-Cookie. > > I do not know how to proceed from here on, so I would be glad to get > some advice. > > Best Regards, > > Thorsten Bonck >
maybe you could try to put pppoe0 on rl0, untag vlan10 on switch port where rl0 is connected and tag other vlans on the same port ...
