On Fri, Jun 13, 2014 at 09:44:02AM -0700, Bryan Irvine wrote:
> You may want to start by posting a dmesg to the list.
>
>
As I have been advised to attach a complete dmesg ouptut, I'm sending
this again. Here it's the complete trace:
OpenBSD 5.5-current (GENERIC) #164: Wed Jun 11 13:11:27 MDT 2014
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) M processor 900MHz ("GenuineIntel" 686-class) 631 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,NXE,PERF
real mem = 527462400 (503MB)
avail mem = 506400768 (482MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/03/08, BIOS32 rev. 0 @ 0xf0010, SMBIOS
rev. 2.5 @ 0xf06e0 (37 entries)
bios0: vendor American Megatrends Inc. version "0910" date 03/03/2008
bios0: ASUSTeK Computer INC. 701
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC OEMB MCFG
acpi0: wakeup devices P0P3(S4) P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4) MC97(S4)
USB1(S3) USB2(S3) USB3(S3) USB4(S3) EUSB(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 70MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 5 (P0P3)
acpiprt2 at acpi0: bus 3 (P0P5)
acpiprt3 at acpi0: bus 1 (P0P6)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2
acpitz0 at acpi0: critical temperature is 90 degC
acpibat0 at acpi0: BAT0 model "701" serial type LION oem "ASUS"
acpiac0 at acpi0: AC unit offline
acpiasus0 at acpi0
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibtn2 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xf800!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x04
vga1 at pci0 dev 2 function 0 "Intel 82915GM Video" rev 0x04
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0
inteldrm0: 800x480
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 82915GM Video" rev 0x04 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801FB HD Audio" rev 0x04: msi
azalia0: codecs: Realtek ALC662
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x04: apic 1 int 16
pci1 at ppb0 bus 4
ppb1 at pci0 dev 28 function 1 "Intel 82801FB PCIE" rev 0x04: apic 1 int 17
pci2 at ppb1 bus 3
lii0 at pci2 dev 0 function 0 "Attansic Technology L2" rev 0xa0: apic 1 int 17,
address 00:22:15:0f:d7:de
atphy0 at lii0 phy 1: F2 10/100 PHY, rev. 2
ppb2 at pci0 dev 28 function 2 "Intel 82801FB PCIE" rev 0x04: apic 1 int 18
pci3 at ppb2 bus 1
ath0 at pci3 dev 0 function 0 "Atheros AR5424" rev 0x01: apic 1 int 18
ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR0W, address 00:15:af:b3:bc:26
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x04: apic 1 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x04: apic 1 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x04: apic 1 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x04: apic 1 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x04: apic 1 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd4
pci4 at ppb3 bus 5
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x04: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x04: DMA, channel
0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 1 drive 0: <SILICONMOTION SM223AC>
wd0: 1-sector PIO, LBA, 3815MB, 7815024 sectors
wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4
ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x04: apic 1 int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 512MB DDR2 SDRAM non-parity PC2-4200CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 6.5
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
umass0 at uhub0 port 5 configuration 1 interface 0 "ENE UB6225" rev 2.00/1.00
addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <USB2.0, CardReader SD0, 0100> SCSI0 0/direct
removable serial.09511606146030377350
uvideo0 at uhub0 port 8 configuration 1 interface 0 "eMPIA Technology EeePC701
camera" rev 2.00/12.12 addr 3
video0 at uvideo0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on wd0a (dc778a07313555da.a) swap on wd0b dump on wd0b
ath0: unable to reset hardware; hal status 36
