I know on my laptop no acpi meant doesn't work. My saving grace is I always keep a kernel from the previous snapshot I tried as obsd. So if bsd doesn't work, I just boot from that. Do you have an older snapshot kernel you can tell tech support to boot into?
On Thu, Jun 26, 2014 at 7:36 PM, Scott Vanderbilt <li...@datagenic.com> wrote: > Having done a little man page reading on boot-time configuration, I learned > about the existence of ukc. I'm wondering whether something like > > ukc> disable acpi0 > > might circumvent the kernel panic and allow the boot to successfully > complete. I'm hoping that since this is a server, ACPI is non-essential. > Just grasping at straws in an effort to get this machine up and running > again. > > Thanks. > > > > > On 6/26/2014 4:21 PM, Scott Vanderbilt wrote: >> >> I have this exact same kernel panic. Unfortunately, it's occurring on a >> host at a remote co-lo. Does anyone know a way that I can get the >> on-site tech to suppress the assertion by way of some boot-time >> configuration? Then at least I can get this machine up and running so I >> can immediately upgrade to the latest snapshot, which apparently fixes >> this issue. >> >> Thanks. >> >> >> On 6/25/2014 8:05 AM, Jason Crawford wrote: >>> >>> My system panic's from the KASSERT() call at line 2269 after dsdt.c was >>> updated to 1.210. >>> >>> All I have is the basic panic message and the dmesg from the last known >>> working snapshot kernel. I tried to get more information but my USB >>> keyboard does not work in the kernel debugger, and my on-board keyboard >>> no longer works at all (I use the laptop as a desktop now). I typed up >>> everything I could see of that panic message by hand. >>> >>> Any patches that need to be tested I will be glad to try out. >>> >>> Here's the panic message and dmesg output. >>> >>> --- panic --- >>> acpi0 at bios0: rev 2panic: kernel diagnostic assertion >>> "rgn->v_opregion.iobase % sz == 0" failed: file >>> "../../../../dev/acpi/dsdt.c", line 2269 >>> Stopped at Debugger+0x9: leave >>> panic() at panic+0xfe >>> __assert() at __assert+0x25 >>> aml_rwgas() at aml_rwgas+0x1fd >>> aml_rwfield() at aml_rwfield+0x205 >>> aml_eval() at aml_eval+0x1ae >>> aml_parse() at aml_parse+0x183d >>> aml_parse() at aml_parse+0x1ff >>> aml_parse() at aml_parse+0x1ff >>> aml_parse() at aml_parse+0x1ff >>> end trace frame: 0xffffffff81ef48f0, count: 0 >>> RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS >>> PANIC! >>> IF RUNNING SMP, USE 'mach ddbcpu <#>' AND 'trace' ON OTHER PROCESSORS, >>> TOO. >>> DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION! >>> >>> >>> --- dmesg --- >>> OpenBSD 5.5-current (GENERIC.MP) #219: Thu Jun 19 22:16:22 MDT 2014 >>> dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP >>> real mem = 4209770496 (4014MB) >>> avail mem = 4088930304 (3899MB) >>> mpath0 at root >>> scsibus0 at mpath0: 256 targets >>> mainbus0 at root >>> bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xdbeda000 (35 entries) >>> bios0: vendor Phoenix Technologies LTD version "V1.04" date 10/22/2009 >>> bios0: Gateway NV53 >>> acpi0 at bios0: rev 2 >>> acpi0: sleep states S0 S3 S4 S5 >>> acpi0: tables DSDT FACP SLIC SSDT APIC MCFG HPET >>> acpi0: wakeup devices LID0(S3) SLPB(S3) PB2_(S4) PB3_(S4) PB4_(S4) >>> PB5_(S4) PB6_(S4) PB7_(S4) PB9_(S4) PB10(S4) OHC0(S3) OHC1(S3) OHC2(S3) >>> OHC3(S3) OHC4(S3) EHC0(S3) [...] >>> acpitimer0 at acpi0: 3579545 Hz, 32 bits >>> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat >>> cpu0 at mainbus0: apid 0 (boot processor) >>> cpu0: AMD Athlon(tm) II Dual-Core M300, 2000.97 MHz >>> cpu0: >>> >>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,3DNOWP,OSVW,IBS,SKINI >>> >>> T,ITSC >>> cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB >>> 64b/line 16-way L2 cache >>> cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully >>> associative >>> cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully >>> associative >>> cpu0: AMD erratum 721 detected and fixed >>> cpu0: smt 0, core 0, package 0 >>> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges >>> cpu0: apic clock running at 200MHz >>> cpu0: mwait min=64, max=64, C-substates=0.0.0.0.0, IBE >>> cpu1 at mainbus0: apid 1 (application processor) >>> cpu1: AMD Athlon(tm) II Dual-Core M300, 2000.03 MHz >>> cpu1: >>> >>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,3DNOWP,OSVW,IBS,SKINI >>> >>> T,ITSC >>> cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB >>> 64b/line 16-way L2 cache >>> cpu1: ITLB 32 4KB entries fully associative, 16 4MB entries fully >>> associative >>> cpu1: DTLB 48 4KB entries fully associative, 48 4MB entries fully >>> associative >>> cpu1: AMD erratum 721 detected and fixed >>> cpu1: smt 0, core 1, package 0 >>> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 21, 24 pins >>> acpimcfg0 at acpi0 addr 0xe0000000, bus 0-9 >>> acpihpet0 at acpi0: 14318180 Hz >>> acpi0: unable to load \\_SB_.PCI0._INI.EXH2 >>> acpiprt0 at acpi0: bus 0 (PCI0) >>> acpiprt1 at acpi0: bus -1 (PB2_) >>> acpiprt2 at acpi0: bus -1 (PB3_) >>> acpiprt3 at acpi0: bus 3 (PB4_) >>> acpiprt4 at acpi0: bus -1 (PB5_) >>> acpiprt5 at acpi0: bus 9 (PB6_) >>> acpiprt6 at acpi0: bus -1 (PB7_) >>> acpiprt7 at acpi0: bus -1 (PB9_) >>> acpiprt8 at acpi0: bus -1 (PB10) >>> acpiprt9 at acpi0: bus 10 (P2P_) >>> acpiprt10 at acpi0: bus 1 (AGP_) >>> acpiec0 at acpi0 >>> acpicpu0 at acpi0: PSS >>> acpicpu1 at acpi0: PSS >>> acpitz0 at acpi0: critical temperature is 95 degC >>> acpitz1 at acpi0: critical temperature is 95 degC >>> acpibtn0 at acpi0: PWRB >>> acpibtn1 at acpi0: LID0 >>> acpibtn2 at acpi0: SLPB >>> acpibat0 at acpi0: BAT0 model "AS09A61" serial 4548 type LION oem >>> "494453" >>> acpiac0 at acpi0: AC unit online >>> acpivideo0 at acpi0: VGA_ >>> acpivideo1 at acpi0: VGA_ >>> acpivout0 at acpivideo1: LCD_ >>> cpu0: 2000 MHz: speeds: 2000 1400 800 MHz >>> pci0 at mainbus0 bus 0 >>> pchb0 at pci0 dev 0 function 0 "AMD RS880 Host" rev 0x00 >>> ppb0 at pci0 dev 1 function 0 vendor "Acer", unknown product 0x9602 >>> rev 0x00 >>> pci1 at ppb0 bus 1 >>> radeondrm0 at pci1 dev 5 function 0 "ATI Mobility Radeon HD 4200" rev >>> 0x00 >>> drm0 at radeondrm0 >>> radeondrm0: apic 2 int 18 >>> azalia0 at pci1 dev 5 function 1 "ATI Radeon HD 4200 HD Audio" rev >>> 0x00: msi >>> azalia0: no supported codecs >>> ppb1 at pci0 dev 4 function 0 "AMD RS780 PCIE" rev 0x00: msi >>> pci2 at ppb1 bus 3 >>> bge0 at pci2 dev 0 function 0 "Broadcom BCM5784" rev 0x10, BCM5784 A1 >>> (0x5784100): msi, address 00:26:2d:6f:6b:e2 >>> brgphy0 at bge0 phy 1: BCM5784 10/100/1000baseT PHY, rev. 4 >>> ppb2 at pci0 dev 6 function 0 "AMD RS780 PCIE" rev 0x00: msi >>> pci3 at ppb2 bus 9 >>> athn0 at pci3 dev 0 function 0 "Atheros AR9281" rev 0x01: apic 2 int 18 >>> athn0: AR9280 rev 2 (2T2R), ROM rev 22, address 70:1a:04:80:80:93 >>> ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 2 int >>> 22, AHCI 1.1 >>> scsibus1 at ahci0: 32 targets >>> sd0 at scsibus1 targ 0 lun 0: <ATA, Hitachi HTS54505, PB4O> SCSI3 >>> 0/direct fixed naa.5000cca59ec6ae72 >>> sd0: 476940MB, 512 bytes/sector, 976773168 sectors >>> cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, DVDRAM GT30N, 1.01> ATAPI >>> 5/cdrom removable >>> ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 16, >>> version 1.0, legacy support >>> ohci1 at pci0 dev 18 function 1 "ATI SB700 USB" rev 0x00: apic 2 int 16, >>> version 1.0, legacy support >>> ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17 >>> usb0 at ehci0: USB revision 2.0 >>> uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1 >>> ohci2 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18, >>> version 1.0, legacy support >>> ohci3 at pci0 dev 19 function 1 "ATI SB700 USB" rev 0x00: apic 2 int 18, >>> version 1.0, legacy support >>> ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 19 >>> usb1 at ehci1: USB revision 2.0 >>> uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1 >>> piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x3c: SMI >>> iic0 at piixpm0 >>> spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM >>> spdmem1 at iic0 addr 0x51: 2GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM >>> azalia1 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x00: apic 2 >>> int 16 >>> azalia1: codecs: Conexant CX20561, Conexant/0x2c06, using Conexant >>> CX20561 >>> audio0 at azalia1 >>> pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x00 >>> ppb3 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00 >>> pci4 at ppb3 bus 10 >>> pchb1 at pci0 dev 24 function 0 "AMD AMD64 10h HyperTransport" rev 0x00 >>> pchb2 at pci0 dev 24 function 1 "AMD AMD64 10h Address Map" rev 0x00 >>> pchb3 at pci0 dev 24 function 2 "AMD AMD64 10h DRAM Cfg" rev 0x00 >>> km0 at pci0 dev 24 function 3 "AMD AMD64 10h Misc Cfg" rev 0x00 >>> pchb4 at pci0 dev 24 function 4 "AMD AMD64 10h Link Cfg" rev 0x00 >>> usb2 at ohci0: USB revision 1.0 >>> uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1 >>> usb3 at ohci1: USB revision 1.0 >>> uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1 >>> usb4 at ohci2: USB revision 1.0 >>> uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1 >>> usb5 at ohci3: USB revision 1.0 >>> uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1 >>> isa0 at pcib0 >>> isadma0 at isa0 >>> pckbc0 at isa0 port 0x60/5 >>> pckbd0 at pckbc0 (kbd slot) >>> pckbc0: using irq 1 for kbd slot >>> wskbd0 at pckbd0: console keyboard >>> pms0 at pckbc0 (aux slot) >>> pckbc0: using irq 12 for aux slot >>> wsmouse0 at pms0 mux 0 >>> pms0: Synaptics touchpad, firmware 7.2 >>> pcppi0 at isa0 port 0x61 >>> spkr0 at pcppi0 >>> uvideo0 at uhub1 port 5 configuration 1 interface 0 "Chicony Electronics >>> Co., Ltd. CNF7017" rev 2.00/11.12 addr 2 >>> video0 at uvideo0 >>> uhub6 at uhub4 port 1 "ALCOR Generic USB Hub" rev 1.10/3.12 addr 2 >>> uhub7 at uhub6 port 1 "Dell Dell USB Keyboard Hub" rev 1.10/2.00 addr 3 >>> uhidev0 at uhub7 port 1 configuration 1 interface 0 "Dell Dell USB >>> Keyboard Hub" rev 1.10/2.00 addr 4 >>> uhidev0: iclass 3/1 >>> ukbd0 at uhidev0: 8 variable keys, 6 key codes >>> wskbd1 at ukbd0 mux 1 >>> uhidev1 at uhub7 port 1 configuration 1 interface 1 "Dell Dell USB >>> Keyboard Hub" rev 1.10/2.00 addr 4 >>> uhidev1: iclass 3/0, 3 report ids >>> uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0 >>> uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0 >>> uhid2 at uhidev1 reportid 3: input=3, output=1, feature=1 >>> uhidev2 at uhub6 port 2 configuration 1 interface 0 "Alcor Micro USB >>> Mouse" rev 1.10/51.27 addr 5 >>> uhidev2: iclass 3/1 >>> ums0 at uhidev2: 3 buttons, Z dir >>> wsmouse1 at ums0 mux 0 >>> uhidev3 at uhub6 port 3 configuration 1 interface 0 "No brand 4 Port >>> KVMSwicther" rev 1.10/1.00 addr 6 >>> uhidev3: iclass 3/0 >>> ukbd1 at uhidev3: 8 variable keys, 6 key codes >>> wskbd2 at ukbd1 mux 1 >>> uhidev4 at uhub6 port 3 configuration 1 interface 1 "No brand 4 Port >>> KVMSwicther" rev 1.10/1.00 addr 6 >>> uhidev4: no input interrupt endpoint >>> vscsi0 at root >>> scsibus2 at vscsi0: 256 targets >>> softraid0 at root >>> scsibus3 at softraid0: 256 targets >>> sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct >>> fixed >>> sd1: 118792MB, 512 bytes/sector, 243287832 sectors >>> root on sd1a (776af4f2c705abaf.a) swap on sd1b dump on sd1b >>> drm: initializing kernel modesetting (RS880 0x1002:0x9712 0x1025:0x0292). >>> radeondrm0: VRAM: 64M 0x00000000C0000000 - 0x00000000C3FFFFFF (64M used) >>> radeondrm0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF >>> drm: PCIE GART of 512M enabled (table at 0x00000000C0040000). >>> radeondrm0: 1366x768 >>> wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using >>> wskbd0 >>> wskbd1: connecting to wsdisplay0 >>> wskbd2: connecting to wsdisplay0 >>> wsdisplay0: screen 1-5 added (std, vt100 emulation)
