I'm having a problem that I don't know how to resolve on an amd64 system
(full dmesg below) which I just upgraded from 5.4-release to
5.5-release. I've not yet done anything with the system other than
upgrading (from CD), saving and restoring packages and deleting
no-longer needed files (as specified in the upgrade guide), and loading
the source tree from CD. I don't think it's a hardware problem, since
the system has been fine up until now. Any suggestions as to how to
proceed would be greatly appreciated.
I was loading the ports tree from the source CD using
# cd /usr && tar xzf /mnt/ports.tar.gz
when I got this error:
tar: Access/modification time set failed on: ports/lang/processing/files/CVS:
Input/output error
The only apparently-relevant info I've found in any log file is, in
/var/log/messages:
Aug 18 14:08:08 minya /bsd: ahci0: attempting to idle device
Aug 18 14:08:08 minya /bsd: ahci0: couldn't recover NCQ error, failing all
outstanding commands.
I'm not sure exactly what is happening when this error occurs, but it's
happened several more times as I've been poking around, including once
during the reboot/fsck sequence mentioned later. It definitely is not
caused by the ls/rm sequence below.
Attempting to do anything with /usr/ports/lang/processing/files produces
weird results:
# cd /usr/ports/lang/processing
# ls -la files
[[~5 second delay]]
# rm -rf files
[[~4 second delay]]
rm: files: Directory not empty
My disk is partitioned as
# df -hi
Filesystem Size Used Avail Capacity iused ifree %iused Mounted on
/dev/sd0a 2.0G 166M 1.7G 9% 3410 282412 1% /
/dev/sd0l 98.4G 3.9G 89.6G 4% 458 13147444 0% /home
/dev/sd0e 3.9G 8.0K 3.7G 0% 5 545657 0% /tmp
/dev/sd0h 9.8G 2.9G 6.5G 31% 271627 1053555 20% /usr
/dev/sd0i 9.8G 2.3G 7.1G 24% 59013 1266169 4% /usr/local
/dev/sd0j 2.0G 1.1G 834M 56% 33455 252367 12% /usr/obj
/dev/sd0k 2.0G 509M 1.4G 27% 25574 260248 9% /usr/xobj
/dev/sd0f 7.9G 18.5M 7.5G 0% 1546 1063796 0% /var
/dev/sd0g 7.9G 570K 7.5G 0% 70 1065272 0% /var/log
so any problem should be on sd0h. I've rebooted to single-user mode and
run 'fsck -f /dev/sd0h', which showed no errors -- but the weird
behavior of ls and rm persists.
I don't see anything in the errata for 5.5 which looks like it would
affect this. If nobody has any bright ideas, I'll try upgrading to the
latest snapshot and see if that changes anything.
Dave
OpenBSD 5.5 (GENERIC.MP) #315: Wed Mar 5 09:37:46 MST 2014
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 6371405824 (6076MB)
avail mem = 6193184768 (5906MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe67b0 (33 entries)
bios0: vendor Hewlett-Packard version "F.02" date 10/03/2011
bios0: Hewlett-Packard HP Pavilion dv7 Notebook PC
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP ASF! HPET APIC MCFG SLIC SSDT BOOT ASPT SSDT SSDT SSDT
SSDT
acpi0: wakeup devices P0P1(S3) LID_(S3) GLAN(S4) EHC1(S3) EHC2(S3) HDEF(S0)
PXSX(S4) RP01(S4) PXSX(S4) RP02(S3) PXSX(S4) RP03(S3) PXSX(S4) RP04(S3)
PXSX(S4) RP05(S3) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz, 1995.78 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz, 1995.47 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz, 1995.47 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz, 1995.47 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
cpu4 at mainbus0: apid 4 (application processor)
cpu4: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz, 1995.47 MHz
cpu4:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu4: 256KB 64b/line 8-way L2 cache
cpu4: smt 0, core 2, package 0
cpu5 at mainbus0: apid 5 (application processor)
cpu5: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz, 1995.47 MHz
cpu5:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu5: 256KB 64b/line 8-way L2 cache
cpu5: smt 1, core 2, package 0
cpu6 at mainbus0: apid 6 (application processor)
cpu6: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz, 1995.47 MHz
cpu6:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu6: 256KB 64b/line 8-way L2 cache
cpu6: smt 0, core 3, package 0
cpu7 at mainbus0: apid 7 (application processor)
cpu7: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz, 1995.47 MHz
cpu7:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu7: 256KB 64b/line 8-way L2 cache
cpu7: smt 1, core 3, package 0
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus 1 (RP01)
acpiprt3 at acpi0: bus 7 (RP02)
acpiprt4 at acpi0: bus 13 (RP03)
acpiprt5 at acpi0: bus 19 (RP04)
acpiprt6 at acpi0: bus -1 (RP05)
acpiprt7 at acpi0: bus -1 (RP06)
acpiprt8 at acpi0: bus -1 (RP07)
acpiprt9 at acpi0: bus -1 (RP08)
acpiprt10 at acpi0: bus -1 (PEG0)
acpiprt11 at acpi0: bus -1 (PEG1)
acpiprt12 at acpi0: bus -1 (PEG2)
acpiprt13 at acpi0: bus -1 (PEG3)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpicpu2 at acpi0: C3, C2, C1, PSS
acpicpu3 at acpi0: C3, C2, C1, PSS
acpicpu4 at acpi0: C3, C2, C1, PSS
acpicpu5 at acpi0: C3, C2, C1, PSS
acpicpu6 at acpi0: C3, C2, C1, PSS
acpicpu7 at acpi0: C3, C2, C1, PSS
acpitz0 at acpi0: critical temperature is 99 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PWRB
acpibat0 at acpi0: BAT0 model "8850" serial Li4402A type Li oem "
Hewlett-Packard "
acpiac0 at acpi0: AC unit online
acpidock0 at acpi0: DOCK not docked (0)
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD02
cpu0: Enhanced SpeedStep 1995 MHz: speeds: 2001, 2000, 1900, 1800, 1700, 1600,
1500, 1400, 1300, 1200, 1100, 1000, 900, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
vga1 at pci0 dev 2 function 0 "Intel HD Graphics 3000" rev 0x09
intagp0 at vga1
agp0 at intagp0: aperture at 0xb0000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0
inteldrm0: 1600x900
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x05: apic 0 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x05: msi
azalia0: codecs: IDT 92HD81B1X, Intel/0x2805, using IDT 92HD81B1X
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb5: msi
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E-VL
(0x2c80), msi, address 2c:41:38:62:07:07
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 5
ppb1 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb5: msi
pci2 at ppb1 bus 7
iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 1000" rev 0x00: msi, MIMO 1T2R,
BGS, address 74:e5:0b:1f:01:62
ppb2 at pci0 dev 28 function 2 "Intel 6 Series PCIE" rev 0xb5: msi
pci3 at ppb2 bus 13
rtsx0 at pci3 dev 0 function 0 "Realtek RTS5209 Card Reader" rev 0x01: msi
sdmmc0 at rtsx0
"Realtek RTS5209 Card Reader" rev 0x01 at pci3 dev 0 function 1 not configured
ppb3 at pci0 dev 28 function 3 "Intel 6 Series PCIE" rev 0xb5: msi
pci4 at ppb3 bus 19
"NEC xHCI" rev 0x04 at pci4 dev 0 function 0 not configured
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x05: apic 0 int 20
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel HM65 LPC" rev 0x05
ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x05: msi, AHCI 1.3
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, ST9750423AS, 0001> SCSI3 0/direct fixed
naa.5000c50044718f26
sd0: 715404MB, 512 bytes/sector, 1465149168 sectors
cd0 at scsibus0 targ 5 lun 0: <hp, BD CMB UJ141AF, 1.00> ATAPI 5/cdrom removable
ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x05: apic 0 int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 SO-DIMM
spdmem1 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.5
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
ugen0 at uhub2 port 1 "Validity Sensors product 0x0018" rev 1.10/0.78 addr 3
uvideo0 at uhub2 port 2 configuration 1 interface 0 "SuYin
HP TrueVision HD" rev 2.00/1.10 addr 4
video0 at uvideo0
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a (c3ffcff67dc13a92.a) swap on sd0b dump on sd0b
--
Dave Anderson
<d...@daveanderson.com>
