With the two latest snapshots I've installed (Aug 29 and Sep 2, amd64)
and the most recent package of mpd (built Aug 30 on my mirror), mpd no
longer starts up, either at boot (via "pkg_scripts" in
/etc/rc.conf.local) or manually ("/etc/rc.d/mpd start" yields
"mpd(failed)"). Attempting to connect with clients results in the
following error:
Couldn't connect to MPD (host = localhost, port = 6600): Connection refused
I know there have been some recent changes to the /etc infrastructure,
but am unsure what has prompted the failure with mpd. I can add that
mpd was working fine as recently as the Aug 26 snapshot (amd64), though
this was also an older package (built late July, I believe).
Anyone else experiencing this problem? Given the simultaneous updating
of system and packages, I'm unsure where the source of the problem lies.
Any thoughts/suggestions much appreciated.
Thanks,
Nick
(dmesg below)
using PIO mode 4, Ultra-DMA mode 6
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-10600
spdmem1 at iic0 addr 0x53: 2GB DDR3 SDRAM PC3-10600
pciide1 at pci0 dev 31 function 5 "Intel 6 Series SATA" rev 0x04: DMA, channel
0 wired to native-PCI, channel 1 wired to native-PCI
pciide1: using apic 2 int 18 for native-PCI interrupt
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
umass0 at uhub2 port 2 configuration 1 interface 0 "Generic Mass Storage
Device" rev 2.00/1.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd0 at scsibus2 targ 1 lun 0: <Generic-, SD/MMC, 1.00> SCSI0 0/direct removable
sd1 at scsibus2 targ 1 lun 1: <Generic-, Compact Flash, 1.01> SCSI0 0/direct
removable
sd2 at scsibus2 targ 1 lun 2: <Generic-, SM/xD Picture, 1.02> SCSI0 0/direct
removable
sd3 at scsibus2 targ 1 lun 3: <Generic-, MS/MS-Pro, 1.03> SCSI0 0/direct
removable
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
umass1 at uhub3 port 3 configuration 1 interface 0 "Seagate Expansion" rev
2.10/2.19 addr 3
umass1: using SCSI over Bulk-Only
scsibus3 at umass1: 2 targets, initiator 0
sd4 at scsibus3 targ 1 lun 0: <Seagate, Expansion, 0219> SCSI4 0/direct fixed
sd4: 953869MB, 512 bytes/sector, 1953525167 sectors
uhub4 at uhub3 port 4 "Standard Microsystems product 0x2514" rev 2.00/b.b3 addr
4
uhidev0 at uhub3 port 5 configuration 1 interface 0 "KINESIS FREESTYLE KB800
KB800 Kinesis Freestyle" rev 1.10/1.22 addr 5
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub3 port 5 configuration 1 interface 1 "KINESIS FREESTYLE KB800
KB800 Kinesis Freestyle" rev 1.10/1.22 addr 5
uhidev1: iclass 3/0, 3 report ids
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=2, output=0, feature=0
uhidev2 at uhub3 port 6 configuration 1 interface 0 "Sunplus USB Optical Mouse"
rev 2.00/0.14 addr 6
uhidev2: iclass 3/1, 2 report ids
ums0 at uhidev2 reportid 1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhid2 at uhidev2 reportid 2: input=1, output=0, feature=0
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
root on wd0a (e7ded47759faeaf3.a) swap on wd0b dump on wd0b
uhub4 detached
uhub4 at uhub3 port 4 "Standard Microsystems product 0x2514" rev 2.00/b.b3 addr
4
syncing disks... done
rebooting...
OpenBSD 5.6-current (RAMDISK_CD) #325: Fri Aug 29 17:06:06 MDT 2014
[email protected]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
RTC BIOS diagnostic error 3f<config_unit,memory_size,fixed_disk,invalid_time>
real mem = 4153880576 (3961MB)
avail mem = 4037914624 (3850MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xf3f40 (80 entries)
bios0: vendor Dell Inc. version "A05" date 05/28/2011
bios0: Dell Inc. OptiPlex 990
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC TCPA MCFG HPET BOOT SSDT SSDT DMAR SLIC
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3293.06 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: apic clock running at 99MHz
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus -1 (RP02)
acpiprt3 at acpi0: bus 2 (RP03)
acpiprt4 at acpi0: bus -1 (RP04)
acpiprt5 at acpi0: bus -1 (RP05)
acpiprt6 at acpi0: bus -1 (RP06)
acpiprt7 at acpi0: bus -1 (RP07)
acpiprt8 at acpi0: bus -1 (RP08)
acpiprt9 at acpi0: bus -1 (PEG0)
acpiprt10 at acpi0: bus -1 (PEG1)
acpiprt11 at acpi0: bus -1 (PEG2)
acpiprt12 at acpi0: bus -1 (PEG3)
acpiprt13 at acpi0: bus 3 (P0P1)
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
vga1 at pci0 dev 2 function 0 "Intel HD Graphics 2000" rev 0x09
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
"Intel 6 Series KT" rev 0x04 at pci0 dev 22 function 3 not configured
em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address
78:2b:cb:b6:d2:d4
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
"Intel 6 Series HD Audio" rev 0x04 at pci0 dev 27 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 2 "Intel 6 Series PCIE" rev 0xb4: msi
pci2 at ppb1 bus 2
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 17
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa4
pci3 at ppb2 bus 3
"Intel Q67 LPC" rev 0x04 at pci0 dev 31 function 0 not configured
pciide0 at pci0 dev 31 function 2 "Intel 6 Series SATA" rev 0x04: DMA, channel
0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 2 int 18 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <ST9500420AS>
wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <Optiarc, DVD+-RW AD-7250H, 100A> ATAPI 5/cdrom
removable
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
"Intel 6 Series SMBus" rev 0x04 at pci0 dev 31 function 3 not configured
pciide1 at pci0 dev 31 function 5 "Intel 6 Series SATA" rev 0x04: DMA, channel
0 wired to native-PCI, channel 1 wired to native-PCI
pciide1: using apic 2 int 18 for native-PCI interrupt
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
uhub2 at uhub0 port 1 "vendor 0x8087 product 0x0024" rev 2.00/0.00 addr 2
umass0 at uhub2 port 2 configuration 1 interface 0 "Generic Mass Storage
Device" rev 2.00/1.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <Generic-, SD/MMC, 1.00> SCSI0 0/direct removable
sd1 at scsibus1 targ 1 lun 1: <Generic-, Compact Flash, 1.01> SCSI0 0/direct
removable
sd2 at scsibus1 targ 1 lun 2: <Generic-, SM/xD Picture, 1.02> SCSI0 0/direct
removable
sd3 at scsibus1 targ 1 lun 3: <Generic-, MS/MS-Pro, 1.03> SCSI0 0/direct
removable
uhub3 at uhub1 port 1 "vendor 0x8087 product 0x0024" rev 2.00/0.00 addr 2
umass1 at uhub3 port 3 configuration 1 interface 0 "Seagate Expansion" rev
2.10/2.19 addr 3
umass1: using SCSI over Bulk-Only
scsibus2 at umass1: 2 targets, initiator 0
sd4 at scsibus2 targ 1 lun 0: <Seagate, Expansion, 0219> SCSI4 0/direct fixed
sd4: 953869MB, 512 bytes/sector, 1953525167 sectors
uhub4 at uhub3 port 4 "vendor 0x0424 product 0x2514" rev 2.00/b.b3 addr 4
uhidev0 at uhub3 port 5 configuration 1 interface 0 "KINESIS FREESTYLE KB800
KB800 Kinesis Freestyle" rev 1.10/1.22 addr 5
uhidev0: iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub3 port 5 configuration 1 interface 1 "KINESIS FREESTYLE KB800
KB800 Kinesis Freestyle" rev 1.10/1.22 addr 5
uhidev1: iclass 3/0, 3 report ids
uhid at uhidev1 reportid 2 not configured
uhid at uhidev1 reportid 3 not configured
uhidev2 at uhub3 port 6 configuration 1 interface 0 "vendor 0x1bcf USB Optical
Mouse" rev 2.00/0.14 addr 6
uhidev2: iclass 3/1, 2 report ids
uhid at uhidev2 reportid 1 not configured
uhid at uhidev2 reportid 2 not configured
softraid0 at root
scsibus3 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
syncing disks... done
rebooting...
OpenBSD 5.6-current (GENERIC.MP) #355: Fri Aug 29 17:01:02 MDT 2014
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error 3f<config_unit,memory_size,fixed_disk,invalid_time>
real mem = 4153880576 (3961MB)
avail mem = 4034572288 (3847MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xf3f40 (80 entries)
bios0: vendor Dell Inc. version "A05" date 05/28/2011
bios0: Dell Inc. OptiPlex 990
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC TCPA MCFG HPET BOOT SSDT SSDT DMAR SLIC
acpi0: wakeup devices PS2K(S3) MOU_(S3) EHC1(S3) EHC2(S3) HDEF(S4) GLAN(S4)
PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4)
PXSX(S4) RP05(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292.99 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.0, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292.52 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292.52 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292.52 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus -1 (RP02)
acpiprt3 at acpi0: bus 2 (RP03)
acpiprt4 at acpi0: bus -1 (RP04)
acpiprt5 at acpi0: bus -1 (RP05)
acpiprt6 at acpi0: bus -1 (RP06)
acpiprt7 at acpi0: bus -1 (RP07)
acpiprt8 at acpi0: bus -1 (RP08)
acpiprt9 at acpi0: bus -1 (PEG0)
acpiprt10 at acpi0: bus -1 (PEG1)
acpiprt11 at acpi0: bus -1 (PEG2)
acpiprt12 at acpi0: bus -1 (PEG3)
acpiprt13 at acpi0: bus 3 (P0P1)
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpicpu2 at acpi0: C3, C2, C1, PSS
acpicpu3 at acpi0: C3, C2, C1, PSS
acpibtn0 at acpi0: PWRB
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD02
cpu0: Enhanced SpeedStep 3292 MHz: speeds: 3301, 3300, 2800, 2600, 2400, 2200,
2000, 1800, 1600 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
vga1 at pci0 dev 2 function 0 "Intel HD Graphics 2000" rev 0x09
intagp at vga1 not configured
inteldrm0 at vga1
drm0 at inteldrm0
drm: Memory usable by graphics device = 2048M
inteldrm0: 1920x1080
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
puc0 at pci0 dev 22 function 3 "Intel 6 Series KT" rev 0x04: ports: 1 com
com4 at puc0 port 0 apic 2 int 17: ns16550a, 16 byte fifo
com4: probed fifo depth: 0 bytes
em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address
78:2b:cb:b6:d2:d4
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04: msi
azalia0: codecs: Realtek ALC269, Intel/0x2805, using Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 2 "Intel 6 Series PCIE" rev 0xb4: msi
pci2 at ppb1 bus 2
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 17
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa4
pci3 at ppb2 bus 3
pcib0 at pci0 dev 31 function 0 "Intel Q67 LPC" rev 0x04
pciide0 at pci0 dev 31 function 2 "Intel 6 Series SATA" rev 0x04: DMA, channel
0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 2 int 18 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <ST9500420AS>
wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <Optiarc, DVD+-RW AD-7250H, 100A> ATAPI 5/cdrom
removable
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-10600
spdmem1 at iic0 addr 0x53: 2GB DDR3 SDRAM PC3-10600
pciide1 at pci0 dev 31 function 5 "Intel 6 Series SATA" rev 0x04: DMA, channel
0 wired to native-PCI, channel 1 wired to native-PCI
pciide1: using apic 2 int 18 for native-PCI interrupt
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
umass0 at uhub2 port 2 configuration 1 interface 0 "Generic Mass Storage
Device" rev 2.00/1.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd0 at scsibus2 targ 1 lun 0: <Generic-, SD/MMC, 1.00> SCSI0 0/direct removable
sd1 at scsibus2 targ 1 lun 1: <Generic-, Compact Flash, 1.01> SCSI0 0/direct
removable
sd2 at scsibus2 targ 1 lun 2: <Generic-, SM/xD Picture, 1.02> SCSI0 0/direct
removable
sd3 at scsibus2 targ 1 lun 3: <Generic-, MS/MS-Pro, 1.03> SCSI0 0/direct
removable
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
umass1 at uhub3 port 3 configuration 1 interface 0 "Seagate Expansion" rev
2.10/2.19 addr 3
umass1: using SCSI over Bulk-Only
scsibus3 at umass1: 2 targets, initiator 0
sd4 at scsibus3 targ 1 lun 0: <Seagate, Expansion, 0219> SCSI4 0/direct fixed
sd4: 953869MB, 512 bytes/sector, 1953525167 sectors
uhub4 at uhub3 port 4 "Standard Microsystems product 0x2514" rev 2.00/b.b3 addr
4
uhidev0 at uhub3 port 5 configuration 1 interface 0 "KINESIS FREESTYLE KB800
KB800 Kinesis Freestyle" rev 1.10/1.22 addr 5
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub3 port 5 configuration 1 interface 1 "KINESIS FREESTYLE KB800
KB800 Kinesis Freestyle" rev 1.10/1.22 addr 5
uhidev1: iclass 3/0, 3 report ids
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=2, output=0, feature=0
uhidev2 at uhub3 port 6 configuration 1 interface 0 "Sunplus USB Optical Mouse"
rev 2.00/0.14 addr 6
uhidev2: iclass 3/1, 2 report ids
ums0 at uhidev2 reportid 1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhid2 at uhidev2 reportid 2: input=1, output=0, feature=0
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
root on wd0a (e7ded47759faeaf3.a) swap on wd0b dump on wd0b
syncing disks... done
rebooting...
OpenBSD 5.6-current (GENERIC.MP) #355: Fri Aug 29 17:01:02 MDT 2014
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error 3f<config_unit,memory_size,fixed_disk,invalid_time>
real mem = 4153880576 (3961MB)
avail mem = 4034572288 (3847MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xf3f40 (80 entries)
bios0: vendor Dell Inc. version "A05" date 05/28/2011
bios0: Dell Inc. OptiPlex 990
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC TCPA MCFG HPET BOOT SSDT SSDT DMAR SLIC
acpi0: wakeup devices PS2K(S3) MOU_(S3) EHC1(S3) EHC2(S3) HDEF(S4) GLAN(S4)
PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4)
PXSX(S4) RP05(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292.93 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.0, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292.52 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292.52 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292.52 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus -1 (RP02)
acpiprt3 at acpi0: bus 2 (RP03)
acpiprt4 at acpi0: bus -1 (RP04)
acpiprt5 at acpi0: bus -1 (RP05)
acpiprt6 at acpi0: bus -1 (RP06)
acpiprt7 at acpi0: bus -1 (RP07)
acpiprt8 at acpi0: bus -1 (RP08)
acpiprt9 at acpi0: bus -1 (PEG0)
acpiprt10 at acpi0: bus -1 (PEG1)
acpiprt11 at acpi0: bus -1 (PEG2)
acpiprt12 at acpi0: bus -1 (PEG3)
acpiprt13 at acpi0: bus 3 (P0P1)
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpicpu2 at acpi0: C3, C2, C1, PSS
acpicpu3 at acpi0: C3, C2, C1, PSS
acpibtn0 at acpi0: PWRB
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD02
cpu0: Enhanced SpeedStep 3292 MHz: speeds: 3301, 3300, 2800, 2600, 2400, 2200,
2000, 1800, 1600 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
vga1 at pci0 dev 2 function 0 "Intel HD Graphics 2000" rev 0x09
intagp at vga1 not configured
inteldrm0 at vga1
drm0 at inteldrm0
drm: Memory usable by graphics device = 2048M
inteldrm0: 1920x1080
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
puc0 at pci0 dev 22 function 3 "Intel 6 Series KT" rev 0x04: ports: 1 com
com4 at puc0 port 0 apic 2 int 17: ns16550a, 16 byte fifo
com4: probed fifo depth: 0 bytes
em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address
78:2b:cb:b6:d2:d4
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04: msi
azalia0: codecs: Realtek ALC269, Intel/0x2805, using Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 2 "Intel 6 Series PCIE" rev 0xb4: msi
pci2 at ppb1 bus 2
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 17
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa4
pci3 at ppb2 bus 3
pcib0 at pci0 dev 31 function 0 "Intel Q67 LPC" rev 0x04
pciide0 at pci0 dev 31 function 2 "Intel 6 Series SATA" rev 0x04: DMA, channel
0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 2 int 18 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <ST9500420AS>
wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <Optiarc, DVD+-RW AD-7250H, 100A> ATAPI 5/cdrom
removable
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-10600
spdmem1 at iic0 addr 0x53: 2GB DDR3 SDRAM PC3-10600
pciide1 at pci0 dev 31 function 5 "Intel 6 Series SATA" rev 0x04: DMA, channel
0 wired to native-PCI, channel 1 wired to native-PCI
pciide1: using apic 2 int 18 for native-PCI interrupt
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
umass0 at uhub2 port 2 configuration 1 interface 0 "Generic Mass Storage
Device" rev 2.00/1.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd0 at scsibus2 targ 1 lun 0: <Generic-, SD/MMC, 1.00> SCSI0 0/direct removable
sd1 at scsibus2 targ 1 lun 1: <Generic-, Compact Flash, 1.01> SCSI0 0/direct
removable
sd2 at scsibus2 targ 1 lun 2: <Generic-, SM/xD Picture, 1.02> SCSI0 0/direct
removable
sd3 at scsibus2 targ 1 lun 3: <Generic-, MS/MS-Pro, 1.03> SCSI0 0/direct
removable
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
umass1 at uhub3 port 3 configuration 1 interface 0 "Seagate Expansion" rev
2.10/2.19 addr 3
umass1: using SCSI over Bulk-Only
scsibus3 at umass1: 2 targets, initiator 0
sd4 at scsibus3 targ 1 lun 0: <Seagate, Expansion, 0219> SCSI4 0/direct fixed
sd4: 953869MB, 512 bytes/sector, 1953525167 sectors
uhub4 at uhub3 port 4 "Standard Microsystems product 0x2514" rev 2.00/b.b3 addr
4
uhidev0 at uhub3 port 5 configuration 1 interface 0 "KINESIS FREESTYLE KB800
KB800 Kinesis Freestyle" rev 1.10/1.22 addr 5
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub3 port 5 configuration 1 interface 1 "KINESIS FREESTYLE KB800
KB800 Kinesis Freestyle" rev 1.10/1.22 addr 5
uhidev1: iclass 3/0, 3 report ids
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=2, output=0, feature=0
uhidev2 at uhub3 port 6 configuration 1 interface 0 "Sunplus USB Optical Mouse"
rev 2.00/0.14 addr 6
uhidev2: iclass 3/1, 2 report ids
ums0 at uhidev2 reportid 1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhid2 at uhidev2 reportid 2: input=1, output=0, feature=0
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
root on wd0a (e7ded47759faeaf3.a) swap on wd0b dump on wd0b
syncing disks... done
rebooting...
OpenBSD 5.6-current (GENERIC.MP) #355: Fri Aug 29 17:01:02 MDT 2014
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error 3f<config_unit,memory_size,fixed_disk,invalid_time>
real mem = 4153880576 (3961MB)
avail mem = 4034572288 (3847MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xf3f40 (80 entries)
bios0: vendor Dell Inc. version "A05" date 05/28/2011
bios0: Dell Inc. OptiPlex 990
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC TCPA MCFG HPET BOOT SSDT SSDT DMAR SLIC
acpi0: wakeup devices PS2K(S3) MOU_(S3) EHC1(S3) EHC2(S3) HDEF(S4) GLAN(S4)
PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4)
PXSX(S4) RP05(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292.97 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.0, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292.52 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292.52 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292.52 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus -1 (RP02)
acpiprt3 at acpi0: bus 2 (RP03)
acpiprt4 at acpi0: bus -1 (RP04)
acpiprt5 at acpi0: bus -1 (RP05)
acpiprt6 at acpi0: bus -1 (RP06)
acpiprt7 at acpi0: bus -1 (RP07)
acpiprt8 at acpi0: bus -1 (RP08)
acpiprt9 at acpi0: bus -1 (PEG0)
acpiprt10 at acpi0: bus -1 (PEG1)
acpiprt11 at acpi0: bus -1 (PEG2)
acpiprt12 at acpi0: bus -1 (PEG3)
acpiprt13 at acpi0: bus 3 (P0P1)
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpicpu2 at acpi0: C3, C2, C1, PSS
acpicpu3 at acpi0: C3, C2, C1, PSS
acpibtn0 at acpi0: PWRB
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD02
cpu0: Enhanced SpeedStep 3292 MHz: speeds: 3301, 3300, 2800, 2600, 2400, 2200,
2000, 1800, 1600 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
vga1 at pci0 dev 2 function 0 "Intel HD Graphics 2000" rev 0x09
intagp at vga1 not configured
inteldrm0 at vga1
drm0 at inteldrm0
drm: Memory usable by graphics device = 2048M
inteldrm0: 1920x1080
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
puc0 at pci0 dev 22 function 3 "Intel 6 Series KT" rev 0x04: ports: 1 com
com4 at puc0 port 0 apic 2 int 17: ns16550a, 16 byte fifo
com4: probed fifo depth: 0 bytes
em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address
78:2b:cb:b6:d2:d4
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04: msi
azalia0: codecs: Realtek ALC269, Intel/0x2805, using Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 2 "Intel 6 Series PCIE" rev 0xb4: msi
pci2 at ppb1 bus 2
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 17
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa4
pci3 at ppb2 bus 3
pcib0 at pci0 dev 31 function 0 "Intel Q67 LPC" rev 0x04
pciide0 at pci0 dev 31 function 2 "Intel 6 Series SATA" rev 0x04: DMA, channel
0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 2 int 18 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <ST9500420AS>
wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <Optiarc, DVD+-RW AD-7250H, 100A> ATAPI 5/cdrom
removable
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-10600
spdmem1 at iic0 addr 0x53: 2GB DDR3 SDRAM PC3-10600
pciide1 at pci0 dev 31 function 5 "Intel 6 Series SATA" rev 0x04: DMA, channel
0 wired to native-PCI, channel 1 wired to native-PCI
pciide1: using apic 2 int 18 for native-PCI interrupt
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
umass0 at uhub2 port 2 configuration 1 interface 0 "Generic Mass Storage
Device" rev 2.00/1.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd0 at scsibus2 targ 1 lun 0: <Generic-, SD/MMC, 1.00> SCSI0 0/direct removable
sd1 at scsibus2 targ 1 lun 1: <Generic-, Compact Flash, 1.01> SCSI0 0/direct
removable
sd2 at scsibus2 targ 1 lun 2: <Generic-, SM/xD Picture, 1.02> SCSI0 0/direct
removable
sd3 at scsibus2 targ 1 lun 3: <Generic-, MS/MS-Pro, 1.03> SCSI0 0/direct
removable
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
umass1 at uhub3 port 3 configuration 1 interface 0 "Seagate Expansion" rev
2.10/2.19 addr 3
umass1: using SCSI over Bulk-Only
scsibus3 at umass1: 2 targets, initiator 0
sd4 at scsibus3 targ 1 lun 0: <Seagate, Expansion, 0219> SCSI4 0/direct fixed
sd4: 953869MB, 512 bytes/sector, 1953525167 sectors
uhub4 at uhub3 port 4 "Standard Microsystems product 0x2514" rev 2.00/b.b3 addr
4
uhidev0 at uhub3 port 5 configuration 1 interface 0 "KINESIS FREESTYLE KB800
KB800 Kinesis Freestyle" rev 1.10/1.22 addr 5
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub3 port 5 configuration 1 interface 1 "KINESIS FREESTYLE KB800
KB800 Kinesis Freestyle" rev 1.10/1.22 addr 5
uhidev1: iclass 3/0, 3 report ids
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=2, output=0, feature=0
uhidev2 at uhub3 port 6 configuration 1 interface 0 "Sunplus USB Optical Mouse"
rev 2.00/0.14 addr 6
uhidev2: iclass 3/1, 2 report ids
ums0 at uhidev2 reportid 1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhid2 at uhidev2 reportid 2: input=1, output=0, feature=0
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
root on wd0a (e7ded47759faeaf3.a) swap on wd0b dump on wd0b
uhub4 detached
uhub4 at uhub3 port 4 "Standard Microsystems product 0x2514" rev 2.00/b.b3 addr
4
syncing disks... done
rebooting...
OpenBSD 5.6-current (GENERIC.MP) #355: Fri Aug 29 17:01:02 MDT 2014
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error 3f<config_unit,memory_size,fixed_disk,invalid_time>
real mem = 4153880576 (3961MB)
avail mem = 4034572288 (3847MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xf3f40 (80 entries)
bios0: vendor Dell Inc. version "A05" date 05/28/2011
bios0: Dell Inc. OptiPlex 990
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC TCPA MCFG HPET BOOT SSDT SSDT DMAR SLIC
acpi0: wakeup devices PS2K(S3) MOU_(S3) EHC1(S3) EHC2(S3) HDEF(S4) GLAN(S4)
PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4)
PXSX(S4) RP05(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292.98 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.0, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292.52 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292.52 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292.52 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus -1 (RP02)
acpiprt3 at acpi0: bus 2 (RP03)
acpiprt4 at acpi0: bus -1 (RP04)
acpiprt5 at acpi0: bus -1 (RP05)
acpiprt6 at acpi0: bus -1 (RP06)
acpiprt7 at acpi0: bus -1 (RP07)
acpiprt8 at acpi0: bus -1 (RP08)
acpiprt9 at acpi0: bus -1 (PEG0)
acpiprt10 at acpi0: bus -1 (PEG1)
acpiprt11 at acpi0: bus -1 (PEG2)
acpiprt12 at acpi0: bus -1 (PEG3)
acpiprt13 at acpi0: bus 3 (P0P1)
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpicpu2 at acpi0: C3, C2, C1, PSS
acpicpu3 at acpi0: C3, C2, C1, PSS
acpibtn0 at acpi0: PWRB
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD02
cpu0: Enhanced SpeedStep 3292 MHz: speeds: 3301, 3300, 2800, 2600, 2400, 2200,
2000, 1800, 1600 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
vga1 at pci0 dev 2 function 0 "Intel HD Graphics 2000" rev 0x09
intagp at vga1 not configured
inteldrm0 at vga1
drm0 at inteldrm0
drm: Memory usable by graphics device = 2048M
inteldrm0: 1920x1080
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
puc0 at pci0 dev 22 function 3 "Intel 6 Series KT" rev 0x04: ports: 1 com
com4 at puc0 port 0 apic 2 int 17: ns16550a, 16 byte fifo
com4: probed fifo depth: 0 bytes
em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address
78:2b:cb:b6:d2:d4
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04: msi
azalia0: codecs: Realtek ALC269, Intel/0x2805, using Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 2 "Intel 6 Series PCIE" rev 0xb4: msi
pci2 at ppb1 bus 2
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 17
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa4
pci3 at ppb2 bus 3
pcib0 at pci0 dev 31 function 0 "Intel Q67 LPC" rev 0x04
pciide0 at pci0 dev 31 function 2 "Intel 6 Series SATA" rev 0x04: DMA, channel
0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 2 int 18 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <ST9500420AS>
wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <Optiarc, DVD+-RW AD-7250H, 100A> ATAPI 5/cdrom
removable
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-10600
spdmem1 at iic0 addr 0x53: 2GB DDR3 SDRAM PC3-10600
pciide1 at pci0 dev 31 function 5 "Intel 6 Series SATA" rev 0x04: DMA, channel
0 wired to native-PCI, channel 1 wired to native-PCI
pciide1: using apic 2 int 18 for native-PCI interrupt
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
umass0 at uhub2 port 2 configuration 1 interface 0 "Generic Mass Storage
Device" rev 2.00/1.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd0 at scsibus2 targ 1 lun 0: <Generic-, SD/MMC, 1.00> SCSI0 0/direct removable
sd1 at scsibus2 targ 1 lun 1: <Generic-, Compact Flash, 1.01> SCSI0 0/direct
removable
sd2 at scsibus2 targ 1 lun 2: <Generic-, SM/xD Picture, 1.02> SCSI0 0/direct
removable
sd3 at scsibus2 targ 1 lun 3: <Generic-, MS/MS-Pro, 1.03> SCSI0 0/direct
removable
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
umass1 at uhub3 port 3 configuration 1 interface 0 "Seagate Expansion" rev
2.10/2.19 addr 3
umass1: using SCSI over Bulk-Only
scsibus3 at umass1: 2 targets, initiator 0
sd4 at scsibus3 targ 1 lun 0: <Seagate, Expansion, 0219> SCSI4 0/direct fixed
sd4: 953869MB, 512 bytes/sector, 1953525167 sectors
uhub4 at uhub3 port 4 "Standard Microsystems product 0x2514" rev 2.00/b.b3 addr
4
uhidev0 at uhub3 port 5 configuration 1 interface 0 "KINESIS FREESTYLE KB800
KB800 Kinesis Freestyle" rev 1.10/1.22 addr 5
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub3 port 5 configuration 1 interface 1 "KINESIS FREESTYLE KB800
KB800 Kinesis Freestyle" rev 1.10/1.22 addr 5
uhidev1: iclass 3/0, 3 report ids
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=2, output=0, feature=0
uhidev2 at uhub3 port 6 configuration 1 interface 0 "Sunplus USB Optical Mouse"
rev 2.00/0.14 addr 6
uhidev2: iclass 3/1, 2 report ids
ums0 at uhidev2 reportid 1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhid2 at uhidev2 reportid 2: input=1, output=0, feature=0
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
root on wd0a (e7ded47759faeaf3.a) swap on wd0b dump on wd0b
syncing disks... done
rebooting...
OpenBSD 5.6-current (RAMDISK_CD) #330: Tue Sep 2 18:15:42 MDT 2014
[email protected]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
RTC BIOS diagnostic error 3f<config_unit,memory_size,fixed_disk,invalid_time>
real mem = 4153880576 (3961MB)
avail mem = 4037914624 (3850MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xf3f40 (80 entries)
bios0: vendor Dell Inc. version "A05" date 05/28/2011
bios0: Dell Inc. OptiPlex 990
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC TCPA MCFG HPET BOOT SSDT SSDT DMAR SLIC
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3293.06 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: apic clock running at 99MHz
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus -1 (RP02)
acpiprt3 at acpi0: bus 2 (RP03)
acpiprt4 at acpi0: bus -1 (RP04)
acpiprt5 at acpi0: bus -1 (RP05)
acpiprt6 at acpi0: bus -1 (RP06)
acpiprt7 at acpi0: bus -1 (RP07)
acpiprt8 at acpi0: bus -1 (RP08)
acpiprt9 at acpi0: bus -1 (PEG0)
acpiprt10 at acpi0: bus -1 (PEG1)
acpiprt11 at acpi0: bus -1 (PEG2)
acpiprt12 at acpi0: bus -1 (PEG3)
acpiprt13 at acpi0: bus 3 (P0P1)
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
vga1 at pci0 dev 2 function 0 "Intel HD Graphics 2000" rev 0x09
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
"Intel 6 Series KT" rev 0x04 at pci0 dev 22 function 3 not configured
em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address
78:2b:cb:b6:d2:d4
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
"Intel 6 Series HD Audio" rev 0x04 at pci0 dev 27 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 2 "Intel 6 Series PCIE" rev 0xb4: msi
pci2 at ppb1 bus 2
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 17
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa4
pci3 at ppb2 bus 3
"Intel Q67 LPC" rev 0x04 at pci0 dev 31 function 0 not configured
pciide0 at pci0 dev 31 function 2 "Intel 6 Series SATA" rev 0x04: DMA, channel
0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 2 int 18 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <ST9500420AS>
wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <Optiarc, DVD+-RW AD-7250H, 100A> ATAPI 5/cdrom
removable
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
"Intel 6 Series SMBus" rev 0x04 at pci0 dev 31 function 3 not configured
pciide1 at pci0 dev 31 function 5 "Intel 6 Series SATA" rev 0x04: DMA, channel
0 wired to native-PCI, channel 1 wired to native-PCI
pciide1: using apic 2 int 18 for native-PCI interrupt
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
uhub2 at uhub0 port 1 "vendor 0x8087 product 0x0024" rev 2.00/0.00 addr 2
umass0 at uhub2 port 2 configuration 1 interface 0 "Generic Mass Storage
Device" rev 2.00/1.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <Generic-, SD/MMC, 1.00> SCSI0 0/direct removable
sd1 at scsibus1 targ 1 lun 1: <Generic-, Compact Flash, 1.01> SCSI0 0/direct
removable
sd2 at scsibus1 targ 1 lun 2: <Generic-, SM/xD Picture, 1.02> SCSI0 0/direct
removable
sd3 at scsibus1 targ 1 lun 3: <Generic-, MS/MS-Pro, 1.03> SCSI0 0/direct
removable
uhub3 at uhub1 port 1 "vendor 0x8087 product 0x0024" rev 2.00/0.00 addr 2
umass1 at uhub3 port 3 configuration 1 interface 0 "Seagate Expansion" rev
2.10/2.19 addr 3
umass1: using SCSI over Bulk-Only
scsibus2 at umass1: 2 targets, initiator 0
sd4 at scsibus2 targ 1 lun 0: <Seagate, Expansion, 0219> SCSI4 0/direct fixed
sd4: 953869MB, 512 bytes/sector, 1953525167 sectors
uhub4 at uhub3 port 4 "vendor 0x0424 product 0x2514" rev 2.00/b.b3 addr 4
uhidev0 at uhub3 port 5 configuration 1 interface 0 "KINESIS FREESTYLE KB800
KB800 Kinesis Freestyle" rev 1.10/1.22 addr 5
uhidev0: iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub3 port 5 configuration 1 interface 1 "KINESIS FREESTYLE KB800
KB800 Kinesis Freestyle" rev 1.10/1.22 addr 5
uhidev1: iclass 3/0, 3 report ids
uhid at uhidev1 reportid 2 not configured
uhid at uhidev1 reportid 3 not configured
uhidev2 at uhub3 port 6 configuration 1 interface 0 "vendor 0x1bcf USB Optical
Mouse" rev 2.00/0.14 addr 6
uhidev2: iclass 3/1, 2 report ids
uhid at uhidev2 reportid 1 not configured
uhid at uhidev2 reportid 2 not configured
softraid0 at root
scsibus3 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
syncing disks... done
rebooting...
OpenBSD 5.6-current (GENERIC.MP) #362: Tue Sep 2 18:10:38 MDT 2014
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error 3f<config_unit,memory_size,fixed_disk,invalid_time>
real mem = 4153880576 (3961MB)
avail mem = 4034564096 (3847MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xf3f40 (80 entries)
bios0: vendor Dell Inc. version "A05" date 05/28/2011
bios0: Dell Inc. OptiPlex 990
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC TCPA MCFG HPET BOOT SSDT SSDT DMAR SLIC
acpi0: wakeup devices PS2K(S3) MOU_(S3) EHC1(S3) EHC2(S3) HDEF(S4) GLAN(S4)
PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4)
PXSX(S4) RP05(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292.95 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.0, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292.52 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292.52 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292.52 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus -1 (RP02)
acpiprt3 at acpi0: bus 2 (RP03)
acpiprt4 at acpi0: bus -1 (RP04)
acpiprt5 at acpi0: bus -1 (RP05)
acpiprt6 at acpi0: bus -1 (RP06)
acpiprt7 at acpi0: bus -1 (RP07)
acpiprt8 at acpi0: bus -1 (RP08)
acpiprt9 at acpi0: bus -1 (PEG0)
acpiprt10 at acpi0: bus -1 (PEG1)
acpiprt11 at acpi0: bus -1 (PEG2)
acpiprt12 at acpi0: bus -1 (PEG3)
acpiprt13 at acpi0: bus 3 (P0P1)
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpicpu2 at acpi0: C3, C2, C1, PSS
acpicpu3 at acpi0: C3, C2, C1, PSS
acpibtn0 at acpi0: PWRB
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD02
cpu0: Enhanced SpeedStep 3292 MHz: speeds: 3301, 3300, 2800, 2600, 2400, 2200,
2000, 1800, 1600 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
vga1 at pci0 dev 2 function 0 "Intel HD Graphics 2000" rev 0x09
intagp at vga1 not configured
inteldrm0 at vga1
drm0 at inteldrm0
drm: Memory usable by graphics device = 2048M
inteldrm0: 1920x1080
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
puc0 at pci0 dev 22 function 3 "Intel 6 Series KT" rev 0x04: ports: 1 com
com4 at puc0 port 0 apic 2 int 17: ns16550a, 16 byte fifo
com4: probed fifo depth: 0 bytes
em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address
78:2b:cb:b6:d2:d4
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04: msi
azalia0: codecs: Realtek ALC269, Intel/0x2805, using Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 2 "Intel 6 Series PCIE" rev 0xb4: msi
pci2 at ppb1 bus 2
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 17
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa4
pci3 at ppb2 bus 3
pcib0 at pci0 dev 31 function 0 "Intel Q67 LPC" rev 0x04
pciide0 at pci0 dev 31 function 2 "Intel 6 Series SATA" rev 0x04: DMA, channel
0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 2 int 18 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <ST9500420AS>
wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <Optiarc, DVD+-RW AD-7250H, 100A> ATAPI 5/cdrom
removable
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-10600
spdmem1 at iic0 addr 0x53: 2GB DDR3 SDRAM PC3-10600
pciide1 at pci0 dev 31 function 5 "Intel 6 Series SATA" rev 0x04: DMA, channel
0 wired to native-PCI, channel 1 wired to native-PCI
pciide1: using apic 2 int 18 for native-PCI interrupt
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
umass0 at uhub2 port 2 configuration 1 interface 0 "Generic Mass Storage
Device" rev 2.00/1.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd0 at scsibus2 targ 1 lun 0: <Generic-, SD/MMC, 1.00> SCSI0 0/direct removable
sd1 at scsibus2 targ 1 lun 1: <Generic-, Compact Flash, 1.01> SCSI0 0/direct
removable
sd2 at scsibus2 targ 1 lun 2: <Generic-, SM/xD Picture, 1.02> SCSI0 0/direct
removable
sd3 at scsibus2 targ 1 lun 3: <Generic-, MS/MS-Pro, 1.03> SCSI0 0/direct
removable
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
umass1 at uhub3 port 3 configuration 1 interface 0 "Seagate Expansion" rev
2.10/2.19 addr 3
umass1: using SCSI over Bulk-Only
scsibus3 at umass1: 2 targets, initiator 0
sd4 at scsibus3 targ 1 lun 0: <Seagate, Expansion, 0219> SCSI4 0/direct fixed
sd4: 953869MB, 512 bytes/sector, 1953525167 sectors
uhub4 at uhub3 port 4 "Standard Microsystems product 0x2514" rev 2.00/b.b3 addr
4
uhidev0 at uhub3 port 5 configuration 1 interface 0 "KINESIS FREESTYLE KB800
KB800 Kinesis Freestyle" rev 1.10/1.22 addr 5
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub3 port 5 configuration 1 interface 1 "KINESIS FREESTYLE KB800
KB800 Kinesis Freestyle" rev 1.10/1.22 addr 5
uhidev1: iclass 3/0, 3 report ids
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=2, output=0, feature=0
uhidev2 at uhub3 port 6 configuration 1 interface 0 "Sunplus USB Optical Mouse"
rev 2.00/0.14 addr 6
uhidev2: iclass 3/1, 2 report ids
ums0 at uhidev2 reportid 1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhid2 at uhidev2 reportid 2: input=1, output=0, feature=0
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
root on wd0a (e7ded47759faeaf3.a) swap on wd0b dump on wd0b
syncing disks... done
rebooting...
OpenBSD 5.6-current (GENERIC.MP) #362: Tue Sep 2 18:10:38 MDT 2014
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error 3f<config_unit,memory_size,fixed_disk,invalid_time>
real mem = 4153880576 (3961MB)
avail mem = 4034564096 (3847MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xf3f40 (80 entries)
bios0: vendor Dell Inc. version "A05" date 05/28/2011
bios0: Dell Inc. OptiPlex 990
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC TCPA MCFG HPET BOOT SSDT SSDT DMAR SLIC
acpi0: wakeup devices PS2K(S3) MOU_(S3) EHC1(S3) EHC2(S3) HDEF(S4) GLAN(S4)
PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4)
PXSX(S4) RP05(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3293.02 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.0, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292.52 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292.52 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292.52 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus -1 (RP02)
acpiprt3 at acpi0: bus 2 (RP03)
acpiprt4 at acpi0: bus -1 (RP04)
acpiprt5 at acpi0: bus -1 (RP05)
acpiprt6 at acpi0: bus -1 (RP06)
acpiprt7 at acpi0: bus -1 (RP07)
acpiprt8 at acpi0: bus -1 (RP08)
acpiprt9 at acpi0: bus -1 (PEG0)
acpiprt10 at acpi0: bus -1 (PEG1)
acpiprt11 at acpi0: bus -1 (PEG2)
acpiprt12 at acpi0: bus -1 (PEG3)
acpiprt13 at acpi0: bus 3 (P0P1)
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpicpu2 at acpi0: C3, C2, C1, PSS
acpicpu3 at acpi0: C3, C2, C1, PSS
acpibtn0 at acpi0: PWRB
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD02
cpu0: Enhanced SpeedStep 3293 MHz: speeds: 3301, 3300, 2800, 2600, 2400, 2200,
2000, 1800, 1600 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
vga1 at pci0 dev 2 function 0 "Intel HD Graphics 2000" rev 0x09
intagp at vga1 not configured
inteldrm0 at vga1
drm0 at inteldrm0
drm: Memory usable by graphics device = 2048M
inteldrm0: 1920x1080
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
puc0 at pci0 dev 22 function 3 "Intel 6 Series KT" rev 0x04: ports: 1 com
com4 at puc0 port 0 apic 2 int 17: ns16550a, 16 byte fifo
com4: probed fifo depth: 0 bytes
em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address
78:2b:cb:b6:d2:d4
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04: msi
azalia0: codecs: Realtek ALC269, Intel/0x2805, using Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 2 "Intel 6 Series PCIE" rev 0xb4: msi
pci2 at ppb1 bus 2
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 17
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa4
pci3 at ppb2 bus 3
pcib0 at pci0 dev 31 function 0 "Intel Q67 LPC" rev 0x04
pciide0 at pci0 dev 31 function 2 "Intel 6 Series SATA" rev 0x04: DMA, channel
0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 2 int 18 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <ST9500420AS>
wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <Optiarc, DVD+-RW AD-7250H, 100A> ATAPI 5/cdrom
removable
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-10600
spdmem1 at iic0 addr 0x53: 2GB DDR3 SDRAM PC3-10600
pciide1 at pci0 dev 31 function 5 "Intel 6 Series SATA" rev 0x04: DMA, channel
0 wired to native-PCI, channel 1 wired to native-PCI
pciide1: using apic 2 int 18 for native-PCI interrupt
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
umass0 at uhub2 port 2 configuration 1 interface 0 "Generic Mass Storage
Device" rev 2.00/1.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd0 at scsibus2 targ 1 lun 0: <Generic-, SD/MMC, 1.00> SCSI0 0/direct removable
sd1 at scsibus2 targ 1 lun 1: <Generic-, Compact Flash, 1.01> SCSI0 0/direct
removable
sd2 at scsibus2 targ 1 lun 2: <Generic-, SM/xD Picture, 1.02> SCSI0 0/direct
removable
sd3 at scsibus2 targ 1 lun 3: <Generic-, MS/MS-Pro, 1.03> SCSI0 0/direct
removable
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
umass1 at uhub3 port 3 configuration 1 interface 0 "Seagate Expansion" rev
2.10/2.19 addr 3
umass1: using SCSI over Bulk-Only
scsibus3 at umass1: 2 targets, initiator 0
sd4 at scsibus3 targ 1 lun 0: <Seagate, Expansion, 0219> SCSI4 0/direct fixed
sd4: 953869MB, 512 bytes/sector, 1953525167 sectors
uhub4 at uhub3 port 4 "Standard Microsystems product 0x2514" rev 2.00/b.b3 addr
4
uhidev0 at uhub3 port 5 configuration 1 interface 0 "KINESIS FREESTYLE KB800
KB800 Kinesis Freestyle" rev 1.10/1.22 addr 5
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub3 port 5 configuration 1 interface 1 "KINESIS FREESTYLE KB800
KB800 Kinesis Freestyle" rev 1.10/1.22 addr 5
uhidev1: iclass 3/0, 3 report ids
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=2, output=0, feature=0
uhidev2 at uhub3 port 6 configuration 1 interface 0 "Sunplus USB Optical Mouse"
rev 2.00/0.14 addr 6
uhidev2: iclass 3/1, 2 report ids
ums0 at uhidev2 reportid 1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhid2 at uhidev2 reportid 2: input=1, output=0, feature=0
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
root on wd0a (e7ded47759faeaf3.a) swap on wd0b dump on wd0b
