On Wed, Sep 03, 2014 at 10:55:47AM -0500, Nicholas Fleisher wrote: > With the two latest snapshots I've installed (Aug 29 and Sep 2, amd64) > and the most recent package of mpd (built Aug 30 on my mirror), mpd no > longer starts up, either at boot (via "pkg_scripts" in > /etc/rc.conf.local) or manually ("/etc/rc.d/mpd start" yields > "mpd(failed)"). Attempting to connect with clients results in the > following error: > > Couldn't connect to MPD (host = localhost, port = 6600): Connection refused >
I've had problems like this when localhost gets redefined (usually by accident via someone updating DNS incorrectly) to something other than 127.0.0.1. Does mpc -h 127.0.0.1 work? -ml > I know there have been some recent changes to the /etc infrastructure, > but am unsure what has prompted the failure with mpd. I can add that > mpd was working fine as recently as the Aug 26 snapshot (amd64), though > this was also an older package (built late July, I believe). > > Anyone else experiencing this problem? Given the simultaneous updating > of system and packages, I'm unsure where the source of the problem lies. > Any thoughts/suggestions much appreciated. > > Thanks, > Nick > > (dmesg below) > using PIO mode 4, Ultra-DMA mode 6 > cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5 > ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic 2 int > 18 > iic0 at ichiic0 > spdmem0 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-10600 > spdmem1 at iic0 addr 0x53: 2GB DDR3 SDRAM PC3-10600 > pciide1 at pci0 dev 31 function 5 "Intel 6 Series SATA" rev 0x04: DMA, > channel 0 wired to native-PCI, channel 1 wired to native-PCI > pciide1: using apic 2 int 18 for native-PCI interrupt > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > lpt0 at isa0 port 0x378/4 irq 7 > uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 > umass0 at uhub2 port 2 configuration 1 interface 0 "Generic Mass Storage > Device" rev 2.00/1.00 addr 3 > umass0: using SCSI over Bulk-Only > scsibus2 at umass0: 2 targets, initiator 0 > sd0 at scsibus2 targ 1 lun 0: <Generic-, SD/MMC, 1.00> SCSI0 0/direct > removable > sd1 at scsibus2 targ 1 lun 1: <Generic-, Compact Flash, 1.01> SCSI0 0/direct > removable > sd2 at scsibus2 targ 1 lun 2: <Generic-, SM/xD Picture, 1.02> SCSI0 0/direct > removable > sd3 at scsibus2 targ 1 lun 3: <Generic-, MS/MS-Pro, 1.03> SCSI0 0/direct > removable > uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 > umass1 at uhub3 port 3 configuration 1 interface 0 "Seagate Expansion" rev > 2.10/2.19 addr 3 > umass1: using SCSI over Bulk-Only > scsibus3 at umass1: 2 targets, initiator 0 > sd4 at scsibus3 targ 1 lun 0: <Seagate, Expansion, 0219> SCSI4 0/direct fixed > sd4: 953869MB, 512 bytes/sector, 1953525167 sectors > uhub4 at uhub3 port 4 "Standard Microsystems product 0x2514" rev 2.00/b.b3 > addr 4 > uhidev0 at uhub3 port 5 configuration 1 interface 0 "KINESIS FREESTYLE KB800 > KB800 Kinesis Freestyle" rev 1.10/1.22 addr 5 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 variable keys, 6 key codes > wskbd1 at ukbd0 mux 1 > wskbd1: connecting to wsdisplay0 > uhidev1 at uhub3 port 5 configuration 1 interface 1 "KINESIS FREESTYLE KB800 > KB800 Kinesis Freestyle" rev 1.10/1.22 addr 5 > uhidev1: iclass 3/0, 3 report ids > uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0 > uhid1 at uhidev1 reportid 3: input=2, output=0, feature=0 > uhidev2 at uhub3 port 6 configuration 1 interface 0 "Sunplus USB Optical > Mouse" rev 2.00/0.14 addr 6 > uhidev2: iclass 3/1, 2 report ids > ums0 at uhidev2 reportid 1: 3 buttons, Z dir > wsmouse0 at ums0 mux 0 > uhid2 at uhidev2 reportid 2: input=1, output=0, feature=0 > vscsi0 at root > scsibus4 at vscsi0: 256 targets > softraid0 at root > scsibus5 at softraid0: 256 targets > root on wd0a (e7ded47759faeaf3.a) swap on wd0b dump on wd0b > uhub4 detached > uhub4 at uhub3 port 4 "Standard Microsystems product 0x2514" rev 2.00/b.b3 > addr 4 > syncing disks... done > rebooting... > OpenBSD 5.6-current (RAMDISK_CD) #325: Fri Aug 29 17:06:06 MDT 2014 > t...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD > RTC BIOS diagnostic error 3f<config_unit,memory_size,fixed_disk,invalid_time> > real mem = 4153880576 (3961MB) > avail mem = 4037914624 (3850MB) > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xf3f40 (80 entries) > bios0: vendor Dell Inc. version "A05" date 05/28/2011 > bios0: Dell Inc. OptiPlex 990 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP APIC TCPA MCFG HPET BOOT SSDT SSDT DMAR SLIC > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3293.06 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC > cpu0: 256KB 64b/line 8-way L2 cache > cpu0: apic clock running at 99MHz > cpu at mainbus0: not configured > cpu at mainbus0: not configured > cpu at mainbus0: not configured > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (RP01) > acpiprt2 at acpi0: bus -1 (RP02) > acpiprt3 at acpi0: bus 2 (RP03) > acpiprt4 at acpi0: bus -1 (RP04) > acpiprt5 at acpi0: bus -1 (RP05) > acpiprt6 at acpi0: bus -1 (RP06) > acpiprt7 at acpi0: bus -1 (RP07) > acpiprt8 at acpi0: bus -1 (RP08) > acpiprt9 at acpi0: bus -1 (PEG0) > acpiprt10 at acpi0: bus -1 (PEG1) > acpiprt11 at acpi0: bus -1 (PEG2) > acpiprt12 at acpi0: bus -1 (PEG3) > acpiprt13 at acpi0: bus 3 (P0P1) > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09 > vga1 at pci0 dev 2 function 0 "Intel HD Graphics 2000" rev 0x09 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > "Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured > "Intel 6 Series KT" rev 0x04 at pci0 dev 22 function 3 not configured > em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address > 78:2b:cb:b6:d2:d4 > ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 16 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > "Intel 6 Series HD Audio" rev 0x04 at pci0 dev 27 function 0 not configured > ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi > pci1 at ppb0 bus 1 > ppb1 at pci0 dev 28 function 2 "Intel 6 Series PCIE" rev 0xb4: msi > pci2 at ppb1 bus 2 > ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 17 > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa4 > pci3 at ppb2 bus 3 > "Intel Q67 LPC" rev 0x04 at pci0 dev 31 function 0 not configured > pciide0 at pci0 dev 31 function 2 "Intel 6 Series SATA" rev 0x04: DMA, > channel 0 configured to native-PCI, channel 1 configured to native-PCI > pciide0: using apic 2 int 18 for native-PCI interrupt > wd0 at pciide0 channel 0 drive 0: <ST9500420AS> > wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors > atapiscsi0 at pciide0 channel 0 drive 1 > scsibus0 at atapiscsi0: 2 targets > cd0 at scsibus0 targ 0 lun 0: <Optiarc, DVD+-RW AD-7250H, 100A> ATAPI 5/cdrom > removable > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6 > cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5 > "Intel 6 Series SMBus" rev 0x04 at pci0 dev 31 function 3 not configured > pciide1 at pci0 dev 31 function 5 "Intel 6 Series SATA" rev 0x04: DMA, > channel 0 wired to native-PCI, channel 1 wired to native-PCI > pciide1: using apic 2 int 18 for native-PCI interrupt > isa0 at mainbus0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > uhub2 at uhub0 port 1 "vendor 0x8087 product 0x0024" rev 2.00/0.00 addr 2 > umass0 at uhub2 port 2 configuration 1 interface 0 "Generic Mass Storage > Device" rev 2.00/1.00 addr 3 > umass0: using SCSI over Bulk-Only > scsibus1 at umass0: 2 targets, initiator 0 > sd0 at scsibus1 targ 1 lun 0: <Generic-, SD/MMC, 1.00> SCSI0 0/direct > removable > sd1 at scsibus1 targ 1 lun 1: <Generic-, Compact Flash, 1.01> SCSI0 0/direct > removable > sd2 at scsibus1 targ 1 lun 2: <Generic-, SM/xD Picture, 1.02> SCSI0 0/direct > removable > sd3 at scsibus1 targ 1 lun 3: <Generic-, MS/MS-Pro, 1.03> SCSI0 0/direct > removable > uhub3 at uhub1 port 1 "vendor 0x8087 product 0x0024" rev 2.00/0.00 addr 2 > umass1 at uhub3 port 3 configuration 1 interface 0 "Seagate Expansion" rev > 2.10/2.19 addr 3 > umass1: using SCSI over Bulk-Only > scsibus2 at umass1: 2 targets, initiator 0 > sd4 at scsibus2 targ 1 lun 0: <Seagate, Expansion, 0219> SCSI4 0/direct fixed > sd4: 953869MB, 512 bytes/sector, 1953525167 sectors > uhub4 at uhub3 port 4 "vendor 0x0424 product 0x2514" rev 2.00/b.b3 addr 4 > uhidev0 at uhub3 port 5 configuration 1 interface 0 "KINESIS FREESTYLE KB800 > KB800 Kinesis Freestyle" rev 1.10/1.22 addr 5 > uhidev0: iclass 3/1 > ukbd0 at uhidev0 > wskbd1 at ukbd0 mux 1 > wskbd1: connecting to wsdisplay0 > uhidev1 at uhub3 port 5 configuration 1 interface 1 "KINESIS FREESTYLE KB800 > KB800 Kinesis Freestyle" rev 1.10/1.22 addr 5 > uhidev1: iclass 3/0, 3 report ids > uhid at uhidev1 reportid 2 not configured > uhid at uhidev1 reportid 3 not configured > uhidev2 at uhub3 port 6 configuration 1 interface 0 "vendor 0x1bcf USB > Optical Mouse" rev 2.00/0.14 addr 6 > uhidev2: iclass 3/1, 2 report ids > uhid at uhidev2 reportid 1 not configured > uhid at uhidev2 reportid 2 not configured > softraid0 at root > scsibus3 at softraid0: 256 targets > root on rd0a swap on rd0b dump on rd0b > syncing disks... done > rebooting... > OpenBSD 5.6-current (GENERIC.MP) #355: Fri Aug 29 17:01:02 MDT 2014 > t...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > RTC BIOS diagnostic error 3f<config_unit,memory_size,fixed_disk,invalid_time> > real mem = 4153880576 (3961MB) > avail mem = 4034572288 (3847MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xf3f40 (80 entries) > bios0: vendor Dell Inc. version "A05" date 05/28/2011 > bios0: Dell Inc. OptiPlex 990 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP APIC TCPA MCFG HPET BOOT SSDT SSDT DMAR SLIC > acpi0: wakeup devices PS2K(S3) MOU_(S3) EHC1(S3) EHC2(S3) HDEF(S4) GLAN(S4) > PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) > PXSX(S4) RP05(S4) [...] > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292.99 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC > cpu0: 256KB 64b/line 8-way L2 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > cpu0: apic clock running at 99MHz > cpu0: mwait min=64, max=64, C-substates=0.2.1.1.0, IBE > cpu1 at mainbus0: apid 2 (application processor) > cpu1: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292.52 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC > cpu1: 256KB 64b/line 8-way L2 cache > cpu1: smt 0, core 1, package 0 > cpu2 at mainbus0: apid 4 (application processor) > cpu2: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292.52 MHz > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC > cpu2: 256KB 64b/line 8-way L2 cache > cpu2: smt 0, core 2, package 0 > cpu3 at mainbus0: apid 6 (application processor) > cpu3: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292.52 MHz > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC > cpu3: 256KB 64b/line 8-way L2 cache > cpu3: smt 0, core 3, package 0 > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 > acpihpet0 at acpi0: 14318179 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (RP01) > acpiprt2 at acpi0: bus -1 (RP02) > acpiprt3 at acpi0: bus 2 (RP03) > acpiprt4 at acpi0: bus -1 (RP04) > acpiprt5 at acpi0: bus -1 (RP05) > acpiprt6 at acpi0: bus -1 (RP06) > acpiprt7 at acpi0: bus -1 (RP07) > acpiprt8 at acpi0: bus -1 (RP08) > acpiprt9 at acpi0: bus -1 (PEG0) > acpiprt10 at acpi0: bus -1 (PEG1) > acpiprt11 at acpi0: bus -1 (PEG2) > acpiprt12 at acpi0: bus -1 (PEG3) > acpiprt13 at acpi0: bus 3 (P0P1) > acpicpu0 at acpi0: C3, C2, C1, PSS > acpicpu1 at acpi0: C3, C2, C1, PSS > acpicpu2 at acpi0: C3, C2, C1, PSS > acpicpu3 at acpi0: C3, C2, C1, PSS > acpibtn0 at acpi0: PWRB > acpivideo0 at acpi0: GFX0 > acpivout0 at acpivideo0: DD02 > cpu0: Enhanced SpeedStep 3292 MHz: speeds: 3301, 3300, 2800, 2600, 2400, > 2200, 2000, 1800, 1600 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09 > vga1 at pci0 dev 2 function 0 "Intel HD Graphics 2000" rev 0x09 > intagp at vga1 not configured > inteldrm0 at vga1 > drm0 at inteldrm0 > drm: Memory usable by graphics device = 2048M > inteldrm0: 1920x1080 > wsdisplay0 at vga1 mux 1: console (std, vt100 emulation) > wsdisplay0: screen 1-5 added (std, vt100 emulation) > "Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured > puc0 at pci0 dev 22 function 3 "Intel 6 Series KT" rev 0x04: ports: 1 com > com4 at puc0 port 0 apic 2 int 17: ns16550a, 16 byte fifo > com4: probed fifo depth: 0 bytes > em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address > 78:2b:cb:b6:d2:d4 > ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 16 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04: msi > azalia0: codecs: Realtek ALC269, Intel/0x2805, using Realtek ALC269 > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi > pci1 at ppb0 bus 1 > ppb1 at pci0 dev 28 function 2 "Intel 6 Series PCIE" rev 0xb4: msi > pci2 at ppb1 bus 2 > ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 17 > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa4 > pci3 at ppb2 bus 3 > pcib0 at pci0 dev 31 function 0 "Intel Q67 LPC" rev 0x04 > pciide0 at pci0 dev 31 function 2 "Intel 6 Series SATA" rev 0x04: DMA, > channel 0 configured to native-PCI, channel 1 configured to native-PCI > pciide0: using apic 2 int 18 for native-PCI interrupt > wd0 at pciide0 channel 0 drive 0: <ST9500420AS> > wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors > atapiscsi0 at pciide0 channel 0 drive 1 > scsibus1 at atapiscsi0: 2 targets > cd0 at scsibus1 targ 0 lun 0: <Optiarc, DVD+-RW AD-7250H, 100A> ATAPI 5/cdrom > removable > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6 > cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5 > ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic 2 int > 18 > iic0 at ichiic0 > spdmem0 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-10600 > spdmem1 at iic0 addr 0x53: 2GB DDR3 SDRAM PC3-10600 > pciide1 at pci0 dev 31 function 5 "Intel 6 Series SATA" rev 0x04: DMA, > channel 0 wired to native-PCI, channel 1 wired to native-PCI > pciide1: using apic 2 int 18 for native-PCI interrupt > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > lpt0 at isa0 port 0x378/4 irq 7 > uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 > umass0 at uhub2 port 2 configuration 1 interface 0 "Generic Mass Storage > Device" rev 2.00/1.00 addr 3 > umass0: using SCSI over Bulk-Only > scsibus2 at umass0: 2 targets, initiator 0 > sd0 at scsibus2 targ 1 lun 0: <Generic-, SD/MMC, 1.00> SCSI0 0/direct > removable > sd1 at scsibus2 targ 1 lun 1: <Generic-, Compact Flash, 1.01> SCSI0 0/direct > removable > sd2 at scsibus2 targ 1 lun 2: <Generic-, SM/xD Picture, 1.02> SCSI0 0/direct > removable > sd3 at scsibus2 targ 1 lun 3: <Generic-, MS/MS-Pro, 1.03> SCSI0 0/direct > removable > uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 > umass1 at uhub3 port 3 configuration 1 interface 0 "Seagate Expansion" rev > 2.10/2.19 addr 3 > umass1: using SCSI over Bulk-Only > scsibus3 at umass1: 2 targets, initiator 0 > sd4 at scsibus3 targ 1 lun 0: <Seagate, Expansion, 0219> SCSI4 0/direct fixed > sd4: 953869MB, 512 bytes/sector, 1953525167 sectors > uhub4 at uhub3 port 4 "Standard Microsystems product 0x2514" rev 2.00/b.b3 > addr 4 > uhidev0 at uhub3 port 5 configuration 1 interface 0 "KINESIS FREESTYLE KB800 > KB800 Kinesis Freestyle" rev 1.10/1.22 addr 5 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 variable keys, 6 key codes > wskbd1 at ukbd0 mux 1 > wskbd1: connecting to wsdisplay0 > uhidev1 at uhub3 port 5 configuration 1 interface 1 "KINESIS FREESTYLE KB800 > KB800 Kinesis Freestyle" rev 1.10/1.22 addr 5 > uhidev1: iclass 3/0, 3 report ids > uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0 > uhid1 at uhidev1 reportid 3: input=2, output=0, feature=0 > uhidev2 at uhub3 port 6 configuration 1 interface 0 "Sunplus USB Optical > Mouse" rev 2.00/0.14 addr 6 > uhidev2: iclass 3/1, 2 report ids > ums0 at uhidev2 reportid 1: 3 buttons, Z dir > wsmouse0 at ums0 mux 0 > uhid2 at uhidev2 reportid 2: input=1, output=0, feature=0 > vscsi0 at root > scsibus4 at vscsi0: 256 targets > softraid0 at root > scsibus5 at softraid0: 256 targets > root on wd0a (e7ded47759faeaf3.a) swap on wd0b dump on wd0b > syncing disks... done > rebooting... > OpenBSD 5.6-current (GENERIC.MP) #355: Fri Aug 29 17:01:02 MDT 2014 > t...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > RTC BIOS diagnostic error 3f<config_unit,memory_size,fixed_disk,invalid_time> > real mem = 4153880576 (3961MB) > avail mem = 4034572288 (3847MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xf3f40 (80 entries) > bios0: vendor Dell Inc. version "A05" date 05/28/2011 > bios0: Dell Inc. OptiPlex 990 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP APIC TCPA MCFG HPET BOOT SSDT SSDT DMAR SLIC > acpi0: wakeup devices PS2K(S3) MOU_(S3) EHC1(S3) EHC2(S3) HDEF(S4) GLAN(S4) > PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) > PXSX(S4) RP05(S4) [...] > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292.93 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC > cpu0: 256KB 64b/line 8-way L2 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > cpu0: apic clock running at 99MHz > cpu0: mwait min=64, max=64, C-substates=0.2.1.1.0, IBE > cpu1 at mainbus0: apid 2 (application processor) > cpu1: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292.52 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC > cpu1: 256KB 64b/line 8-way L2 cache > cpu1: smt 0, core 1, package 0 > cpu2 at mainbus0: apid 4 (application processor) > cpu2: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292.52 MHz > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC > cpu2: 256KB 64b/line 8-way L2 cache > cpu2: smt 0, core 2, package 0 > cpu3 at mainbus0: apid 6 (application processor) > cpu3: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292.52 MHz > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC > cpu3: 256KB 64b/line 8-way L2 cache > cpu3: smt 0, core 3, package 0 > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 > acpihpet0 at acpi0: 14318179 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (RP01) > acpiprt2 at acpi0: bus -1 (RP02) > acpiprt3 at acpi0: bus 2 (RP03) > acpiprt4 at acpi0: bus -1 (RP04) > acpiprt5 at acpi0: bus -1 (RP05) > acpiprt6 at acpi0: bus -1 (RP06) > acpiprt7 at acpi0: bus -1 (RP07) > acpiprt8 at acpi0: bus -1 (RP08) > acpiprt9 at acpi0: bus -1 (PEG0) > acpiprt10 at acpi0: bus -1 (PEG1) > acpiprt11 at acpi0: bus -1 (PEG2) > acpiprt12 at acpi0: bus -1 (PEG3) > acpiprt13 at acpi0: bus 3 (P0P1) > acpicpu0 at acpi0: C3, C2, C1, PSS > acpicpu1 at acpi0: C3, C2, C1, PSS > acpicpu2 at acpi0: C3, C2, C1, PSS > acpicpu3 at acpi0: C3, C2, C1, PSS > acpibtn0 at acpi0: PWRB > acpivideo0 at acpi0: GFX0 > acpivout0 at acpivideo0: DD02 > cpu0: Enhanced SpeedStep 3292 MHz: speeds: 3301, 3300, 2800, 2600, 2400, > 2200, 2000, 1800, 1600 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09 > vga1 at pci0 dev 2 function 0 "Intel HD Graphics 2000" rev 0x09 > intagp at vga1 not configured > inteldrm0 at vga1 > drm0 at inteldrm0 > drm: Memory usable by graphics device = 2048M > inteldrm0: 1920x1080 > wsdisplay0 at vga1 mux 1: console (std, vt100 emulation) > wsdisplay0: screen 1-5 added (std, vt100 emulation) > "Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured > puc0 at pci0 dev 22 function 3 "Intel 6 Series KT" rev 0x04: ports: 1 com > com4 at puc0 port 0 apic 2 int 17: ns16550a, 16 byte fifo > com4: probed fifo depth: 0 bytes > em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address > 78:2b:cb:b6:d2:d4 > ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 16 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04: msi > azalia0: codecs: Realtek ALC269, Intel/0x2805, using Realtek ALC269 > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi > pci1 at ppb0 bus 1 > ppb1 at pci0 dev 28 function 2 "Intel 6 Series PCIE" rev 0xb4: msi > pci2 at ppb1 bus 2 > ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 17 > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa4 > pci3 at ppb2 bus 3 > pcib0 at pci0 dev 31 function 0 "Intel Q67 LPC" rev 0x04 > pciide0 at pci0 dev 31 function 2 "Intel 6 Series SATA" rev 0x04: DMA, > channel 0 configured to native-PCI, channel 1 configured to native-PCI > pciide0: using apic 2 int 18 for native-PCI interrupt > wd0 at pciide0 channel 0 drive 0: <ST9500420AS> > wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors > atapiscsi0 at pciide0 channel 0 drive 1 > scsibus1 at atapiscsi0: 2 targets > cd0 at scsibus1 targ 0 lun 0: <Optiarc, DVD+-RW AD-7250H, 100A> ATAPI 5/cdrom > removable > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6 > cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5 > ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic 2 int > 18 > iic0 at ichiic0 > spdmem0 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-10600 > spdmem1 at iic0 addr 0x53: 2GB DDR3 SDRAM PC3-10600 > pciide1 at pci0 dev 31 function 5 "Intel 6 Series SATA" rev 0x04: DMA, > channel 0 wired to native-PCI, channel 1 wired to native-PCI > pciide1: using apic 2 int 18 for native-PCI interrupt > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > lpt0 at isa0 port 0x378/4 irq 7 > uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 > umass0 at uhub2 port 2 configuration 1 interface 0 "Generic Mass Storage > Device" rev 2.00/1.00 addr 3 > umass0: using SCSI over Bulk-Only > scsibus2 at umass0: 2 targets, initiator 0 > sd0 at scsibus2 targ 1 lun 0: <Generic-, SD/MMC, 1.00> SCSI0 0/direct > removable > sd1 at scsibus2 targ 1 lun 1: <Generic-, Compact Flash, 1.01> SCSI0 0/direct > removable > sd2 at scsibus2 targ 1 lun 2: <Generic-, SM/xD Picture, 1.02> SCSI0 0/direct > removable > sd3 at scsibus2 targ 1 lun 3: <Generic-, MS/MS-Pro, 1.03> SCSI0 0/direct > removable > uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 > umass1 at uhub3 port 3 configuration 1 interface 0 "Seagate Expansion" rev > 2.10/2.19 addr 3 > umass1: using SCSI over Bulk-Only > scsibus3 at umass1: 2 targets, initiator 0 > sd4 at scsibus3 targ 1 lun 0: <Seagate, Expansion, 0219> SCSI4 0/direct fixed > sd4: 953869MB, 512 bytes/sector, 1953525167 sectors > uhub4 at uhub3 port 4 "Standard Microsystems product 0x2514" rev 2.00/b.b3 > addr 4 > uhidev0 at uhub3 port 5 configuration 1 interface 0 "KINESIS FREESTYLE KB800 > KB800 Kinesis Freestyle" rev 1.10/1.22 addr 5 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 variable keys, 6 key codes > wskbd1 at ukbd0 mux 1 > wskbd1: connecting to wsdisplay0 > uhidev1 at uhub3 port 5 configuration 1 interface 1 "KINESIS FREESTYLE KB800 > KB800 Kinesis Freestyle" rev 1.10/1.22 addr 5 > uhidev1: iclass 3/0, 3 report ids > uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0 > uhid1 at uhidev1 reportid 3: input=2, output=0, feature=0 > uhidev2 at uhub3 port 6 configuration 1 interface 0 "Sunplus USB Optical > Mouse" rev 2.00/0.14 addr 6 > uhidev2: iclass 3/1, 2 report ids > ums0 at uhidev2 reportid 1: 3 buttons, Z dir > wsmouse0 at ums0 mux 0 > uhid2 at uhidev2 reportid 2: input=1, output=0, feature=0 > vscsi0 at root > scsibus4 at vscsi0: 256 targets > softraid0 at root > scsibus5 at softraid0: 256 targets > root on wd0a (e7ded47759faeaf3.a) swap on wd0b dump on wd0b > syncing disks... done > rebooting... > OpenBSD 5.6-current (GENERIC.MP) #355: Fri Aug 29 17:01:02 MDT 2014 > t...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > RTC BIOS diagnostic error 3f<config_unit,memory_size,fixed_disk,invalid_time> > real mem = 4153880576 (3961MB) > avail mem = 4034572288 (3847MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xf3f40 (80 entries) > bios0: vendor Dell Inc. version "A05" date 05/28/2011 > bios0: Dell Inc. OptiPlex 990 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP APIC TCPA MCFG HPET BOOT SSDT SSDT DMAR SLIC > acpi0: wakeup devices PS2K(S3) MOU_(S3) EHC1(S3) EHC2(S3) HDEF(S4) GLAN(S4) > PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) > PXSX(S4) RP05(S4) [...] > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292.97 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC > cpu0: 256KB 64b/line 8-way L2 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > cpu0: apic clock running at 99MHz > cpu0: mwait min=64, max=64, C-substates=0.2.1.1.0, IBE > cpu1 at mainbus0: apid 2 (application processor) > cpu1: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292.52 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC > cpu1: 256KB 64b/line 8-way L2 cache > cpu1: smt 0, core 1, package 0 > cpu2 at mainbus0: apid 4 (application processor) > cpu2: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292.52 MHz > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC > cpu2: 256KB 64b/line 8-way L2 cache > cpu2: smt 0, core 2, package 0 > cpu3 at mainbus0: apid 6 (application processor) > cpu3: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292.52 MHz > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC > cpu3: 256KB 64b/line 8-way L2 cache > cpu3: smt 0, core 3, package 0 > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 > acpihpet0 at acpi0: 14318179 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (RP01) > acpiprt2 at acpi0: bus -1 (RP02) > acpiprt3 at acpi0: bus 2 (RP03) > acpiprt4 at acpi0: bus -1 (RP04) > acpiprt5 at acpi0: bus -1 (RP05) > acpiprt6 at acpi0: bus -1 (RP06) > acpiprt7 at acpi0: bus -1 (RP07) > acpiprt8 at acpi0: bus -1 (RP08) > acpiprt9 at acpi0: bus -1 (PEG0) > acpiprt10 at acpi0: bus -1 (PEG1) > acpiprt11 at acpi0: bus -1 (PEG2) > acpiprt12 at acpi0: bus -1 (PEG3) > acpiprt13 at acpi0: bus 3 (P0P1) > acpicpu0 at acpi0: C3, C2, C1, PSS > acpicpu1 at acpi0: C3, C2, C1, PSS > acpicpu2 at acpi0: C3, C2, C1, PSS > acpicpu3 at acpi0: C3, C2, C1, PSS > acpibtn0 at acpi0: PWRB > acpivideo0 at acpi0: GFX0 > acpivout0 at acpivideo0: DD02 > cpu0: Enhanced SpeedStep 3292 MHz: speeds: 3301, 3300, 2800, 2600, 2400, > 2200, 2000, 1800, 1600 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09 > vga1 at pci0 dev 2 function 0 "Intel HD Graphics 2000" rev 0x09 > intagp at vga1 not configured > inteldrm0 at vga1 > drm0 at inteldrm0 > drm: Memory usable by graphics device = 2048M > inteldrm0: 1920x1080 > wsdisplay0 at vga1 mux 1: console (std, vt100 emulation) > wsdisplay0: screen 1-5 added (std, vt100 emulation) > "Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured > puc0 at pci0 dev 22 function 3 "Intel 6 Series KT" rev 0x04: ports: 1 com > com4 at puc0 port 0 apic 2 int 17: ns16550a, 16 byte fifo > com4: probed fifo depth: 0 bytes > em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address > 78:2b:cb:b6:d2:d4 > ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 16 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04: msi > azalia0: codecs: Realtek ALC269, Intel/0x2805, using Realtek ALC269 > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi > pci1 at ppb0 bus 1 > ppb1 at pci0 dev 28 function 2 "Intel 6 Series PCIE" rev 0xb4: msi > pci2 at ppb1 bus 2 > ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 17 > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa4 > pci3 at ppb2 bus 3 > pcib0 at pci0 dev 31 function 0 "Intel Q67 LPC" rev 0x04 > pciide0 at pci0 dev 31 function 2 "Intel 6 Series SATA" rev 0x04: DMA, > channel 0 configured to native-PCI, channel 1 configured to native-PCI > pciide0: using apic 2 int 18 for native-PCI interrupt > wd0 at pciide0 channel 0 drive 0: <ST9500420AS> > wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors > atapiscsi0 at pciide0 channel 0 drive 1 > scsibus1 at atapiscsi0: 2 targets > cd0 at scsibus1 targ 0 lun 0: <Optiarc, DVD+-RW AD-7250H, 100A> ATAPI 5/cdrom > removable > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6 > cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5 > ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic 2 int > 18 > iic0 at ichiic0 > spdmem0 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-10600 > spdmem1 at iic0 addr 0x53: 2GB DDR3 SDRAM PC3-10600 > pciide1 at pci0 dev 31 function 5 "Intel 6 Series SATA" rev 0x04: DMA, > channel 0 wired to native-PCI, channel 1 wired to native-PCI > pciide1: using apic 2 int 18 for native-PCI interrupt > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > lpt0 at isa0 port 0x378/4 irq 7 > uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 > umass0 at uhub2 port 2 configuration 1 interface 0 "Generic Mass Storage > Device" rev 2.00/1.00 addr 3 > umass0: using SCSI over Bulk-Only > scsibus2 at umass0: 2 targets, initiator 0 > sd0 at scsibus2 targ 1 lun 0: <Generic-, SD/MMC, 1.00> SCSI0 0/direct > removable > sd1 at scsibus2 targ 1 lun 1: <Generic-, Compact Flash, 1.01> SCSI0 0/direct > removable > sd2 at scsibus2 targ 1 lun 2: <Generic-, SM/xD Picture, 1.02> SCSI0 0/direct > removable > sd3 at scsibus2 targ 1 lun 3: <Generic-, MS/MS-Pro, 1.03> SCSI0 0/direct > removable > uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 > umass1 at uhub3 port 3 configuration 1 interface 0 "Seagate Expansion" rev > 2.10/2.19 addr 3 > umass1: using SCSI over Bulk-Only > scsibus3 at umass1: 2 targets, initiator 0 > sd4 at scsibus3 targ 1 lun 0: <Seagate, Expansion, 0219> SCSI4 0/direct fixed > sd4: 953869MB, 512 bytes/sector, 1953525167 sectors > uhub4 at uhub3 port 4 "Standard Microsystems product 0x2514" rev 2.00/b.b3 > addr 4 > uhidev0 at uhub3 port 5 configuration 1 interface 0 "KINESIS FREESTYLE KB800 > KB800 Kinesis Freestyle" rev 1.10/1.22 addr 5 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 variable keys, 6 key codes > wskbd1 at ukbd0 mux 1 > wskbd1: connecting to wsdisplay0 > uhidev1 at uhub3 port 5 configuration 1 interface 1 "KINESIS FREESTYLE KB800 > KB800 Kinesis Freestyle" rev 1.10/1.22 addr 5 > uhidev1: iclass 3/0, 3 report ids > uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0 > uhid1 at uhidev1 reportid 3: input=2, output=0, feature=0 > uhidev2 at uhub3 port 6 configuration 1 interface 0 "Sunplus USB Optical > Mouse" rev 2.00/0.14 addr 6 > uhidev2: iclass 3/1, 2 report ids > ums0 at uhidev2 reportid 1: 3 buttons, Z dir > wsmouse0 at ums0 mux 0 > uhid2 at uhidev2 reportid 2: input=1, output=0, feature=0 > vscsi0 at root > scsibus4 at vscsi0: 256 targets > softraid0 at root > scsibus5 at softraid0: 256 targets > root on wd0a (e7ded47759faeaf3.a) swap on wd0b dump on wd0b > uhub4 detached > uhub4 at uhub3 port 4 "Standard Microsystems product 0x2514" rev 2.00/b.b3 > addr 4 > syncing disks... done > rebooting... > OpenBSD 5.6-current (GENERIC.MP) #355: Fri Aug 29 17:01:02 MDT 2014 > t...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > RTC BIOS diagnostic error 3f<config_unit,memory_size,fixed_disk,invalid_time> > real mem = 4153880576 (3961MB) > avail mem = 4034572288 (3847MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xf3f40 (80 entries) > bios0: vendor Dell Inc. version "A05" date 05/28/2011 > bios0: Dell Inc. OptiPlex 990 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP APIC TCPA MCFG HPET BOOT SSDT SSDT DMAR SLIC > acpi0: wakeup devices PS2K(S3) MOU_(S3) EHC1(S3) EHC2(S3) HDEF(S4) GLAN(S4) > PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) > PXSX(S4) RP05(S4) [...] > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292.98 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC > cpu0: 256KB 64b/line 8-way L2 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > cpu0: apic clock running at 99MHz > cpu0: mwait min=64, max=64, C-substates=0.2.1.1.0, IBE > cpu1 at mainbus0: apid 2 (application processor) > cpu1: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292.52 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC > cpu1: 256KB 64b/line 8-way L2 cache > cpu1: smt 0, core 1, package 0 > cpu2 at mainbus0: apid 4 (application processor) > cpu2: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292.52 MHz > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC > cpu2: 256KB 64b/line 8-way L2 cache > cpu2: smt 0, core 2, package 0 > cpu3 at mainbus0: apid 6 (application processor) > cpu3: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292.52 MHz > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC > cpu3: 256KB 64b/line 8-way L2 cache > cpu3: smt 0, core 3, package 0 > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 > acpihpet0 at acpi0: 14318179 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (RP01) > acpiprt2 at acpi0: bus -1 (RP02) > acpiprt3 at acpi0: bus 2 (RP03) > acpiprt4 at acpi0: bus -1 (RP04) > acpiprt5 at acpi0: bus -1 (RP05) > acpiprt6 at acpi0: bus -1 (RP06) > acpiprt7 at acpi0: bus -1 (RP07) > acpiprt8 at acpi0: bus -1 (RP08) > acpiprt9 at acpi0: bus -1 (PEG0) > acpiprt10 at acpi0: bus -1 (PEG1) > acpiprt11 at acpi0: bus -1 (PEG2) > acpiprt12 at acpi0: bus -1 (PEG3) > acpiprt13 at acpi0: bus 3 (P0P1) > acpicpu0 at acpi0: C3, C2, C1, PSS > acpicpu1 at acpi0: C3, C2, C1, PSS > acpicpu2 at acpi0: C3, C2, C1, PSS > acpicpu3 at acpi0: C3, C2, C1, PSS > acpibtn0 at acpi0: PWRB > acpivideo0 at acpi0: GFX0 > acpivout0 at acpivideo0: DD02 > cpu0: Enhanced SpeedStep 3292 MHz: speeds: 3301, 3300, 2800, 2600, 2400, > 2200, 2000, 1800, 1600 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09 > vga1 at pci0 dev 2 function 0 "Intel HD Graphics 2000" rev 0x09 > intagp at vga1 not configured > inteldrm0 at vga1 > drm0 at inteldrm0 > drm: Memory usable by graphics device = 2048M > inteldrm0: 1920x1080 > wsdisplay0 at vga1 mux 1: console (std, vt100 emulation) > wsdisplay0: screen 1-5 added (std, vt100 emulation) > "Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured > puc0 at pci0 dev 22 function 3 "Intel 6 Series KT" rev 0x04: ports: 1 com > com4 at puc0 port 0 apic 2 int 17: ns16550a, 16 byte fifo > com4: probed fifo depth: 0 bytes > em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address > 78:2b:cb:b6:d2:d4 > ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 16 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04: msi > azalia0: codecs: Realtek ALC269, Intel/0x2805, using Realtek ALC269 > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi > pci1 at ppb0 bus 1 > ppb1 at pci0 dev 28 function 2 "Intel 6 Series PCIE" rev 0xb4: msi > pci2 at ppb1 bus 2 > ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 17 > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa4 > pci3 at ppb2 bus 3 > pcib0 at pci0 dev 31 function 0 "Intel Q67 LPC" rev 0x04 > pciide0 at pci0 dev 31 function 2 "Intel 6 Series SATA" rev 0x04: DMA, > channel 0 configured to native-PCI, channel 1 configured to native-PCI > pciide0: using apic 2 int 18 for native-PCI interrupt > wd0 at pciide0 channel 0 drive 0: <ST9500420AS> > wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors > atapiscsi0 at pciide0 channel 0 drive 1 > scsibus1 at atapiscsi0: 2 targets > cd0 at scsibus1 targ 0 lun 0: <Optiarc, DVD+-RW AD-7250H, 100A> ATAPI 5/cdrom > removable > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6 > cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5 > ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic 2 int > 18 > iic0 at ichiic0 > spdmem0 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-10600 > spdmem1 at iic0 addr 0x53: 2GB DDR3 SDRAM PC3-10600 > pciide1 at pci0 dev 31 function 5 "Intel 6 Series SATA" rev 0x04: DMA, > channel 0 wired to native-PCI, channel 1 wired to native-PCI > pciide1: using apic 2 int 18 for native-PCI interrupt > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > lpt0 at isa0 port 0x378/4 irq 7 > uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 > umass0 at uhub2 port 2 configuration 1 interface 0 "Generic Mass Storage > Device" rev 2.00/1.00 addr 3 > umass0: using SCSI over Bulk-Only > scsibus2 at umass0: 2 targets, initiator 0 > sd0 at scsibus2 targ 1 lun 0: <Generic-, SD/MMC, 1.00> SCSI0 0/direct > removable > sd1 at scsibus2 targ 1 lun 1: <Generic-, Compact Flash, 1.01> SCSI0 0/direct > removable > sd2 at scsibus2 targ 1 lun 2: <Generic-, SM/xD Picture, 1.02> SCSI0 0/direct > removable > sd3 at scsibus2 targ 1 lun 3: <Generic-, MS/MS-Pro, 1.03> SCSI0 0/direct > removable > uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 > umass1 at uhub3 port 3 configuration 1 interface 0 "Seagate Expansion" rev > 2.10/2.19 addr 3 > umass1: using SCSI over Bulk-Only > scsibus3 at umass1: 2 targets, initiator 0 > sd4 at scsibus3 targ 1 lun 0: <Seagate, Expansion, 0219> SCSI4 0/direct fixed > sd4: 953869MB, 512 bytes/sector, 1953525167 sectors > uhub4 at uhub3 port 4 "Standard Microsystems product 0x2514" rev 2.00/b.b3 > addr 4 > uhidev0 at uhub3 port 5 configuration 1 interface 0 "KINESIS FREESTYLE KB800 > KB800 Kinesis Freestyle" rev 1.10/1.22 addr 5 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 variable keys, 6 key codes > wskbd1 at ukbd0 mux 1 > wskbd1: connecting to wsdisplay0 > uhidev1 at uhub3 port 5 configuration 1 interface 1 "KINESIS FREESTYLE KB800 > KB800 Kinesis Freestyle" rev 1.10/1.22 addr 5 > uhidev1: iclass 3/0, 3 report ids > uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0 > uhid1 at uhidev1 reportid 3: input=2, output=0, feature=0 > uhidev2 at uhub3 port 6 configuration 1 interface 0 "Sunplus USB Optical > Mouse" rev 2.00/0.14 addr 6 > uhidev2: iclass 3/1, 2 report ids > ums0 at uhidev2 reportid 1: 3 buttons, Z dir > wsmouse0 at ums0 mux 0 > uhid2 at uhidev2 reportid 2: input=1, output=0, feature=0 > vscsi0 at root > scsibus4 at vscsi0: 256 targets > softraid0 at root > scsibus5 at softraid0: 256 targets > root on wd0a (e7ded47759faeaf3.a) swap on wd0b dump on wd0b > syncing disks... done > rebooting... > OpenBSD 5.6-current (RAMDISK_CD) #330: Tue Sep 2 18:15:42 MDT 2014 > t...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD > RTC BIOS diagnostic error 3f<config_unit,memory_size,fixed_disk,invalid_time> > real mem = 4153880576 (3961MB) > avail mem = 4037914624 (3850MB) > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xf3f40 (80 entries) > bios0: vendor Dell Inc. version "A05" date 05/28/2011 > bios0: Dell Inc. OptiPlex 990 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP APIC TCPA MCFG HPET BOOT SSDT SSDT DMAR SLIC > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3293.06 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC > cpu0: 256KB 64b/line 8-way L2 cache > cpu0: apic clock running at 99MHz > cpu at mainbus0: not configured > cpu at mainbus0: not configured > cpu at mainbus0: not configured > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (RP01) > acpiprt2 at acpi0: bus -1 (RP02) > acpiprt3 at acpi0: bus 2 (RP03) > acpiprt4 at acpi0: bus -1 (RP04) > acpiprt5 at acpi0: bus -1 (RP05) > acpiprt6 at acpi0: bus -1 (RP06) > acpiprt7 at acpi0: bus -1 (RP07) > acpiprt8 at acpi0: bus -1 (RP08) > acpiprt9 at acpi0: bus -1 (PEG0) > acpiprt10 at acpi0: bus -1 (PEG1) > acpiprt11 at acpi0: bus -1 (PEG2) > acpiprt12 at acpi0: bus -1 (PEG3) > acpiprt13 at acpi0: bus 3 (P0P1) > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09 > vga1 at pci0 dev 2 function 0 "Intel HD Graphics 2000" rev 0x09 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > "Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured > "Intel 6 Series KT" rev 0x04 at pci0 dev 22 function 3 not configured > em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address > 78:2b:cb:b6:d2:d4 > ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 16 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > "Intel 6 Series HD Audio" rev 0x04 at pci0 dev 27 function 0 not configured > ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi > pci1 at ppb0 bus 1 > ppb1 at pci0 dev 28 function 2 "Intel 6 Series PCIE" rev 0xb4: msi > pci2 at ppb1 bus 2 > ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 17 > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa4 > pci3 at ppb2 bus 3 > "Intel Q67 LPC" rev 0x04 at pci0 dev 31 function 0 not configured > pciide0 at pci0 dev 31 function 2 "Intel 6 Series SATA" rev 0x04: DMA, > channel 0 configured to native-PCI, channel 1 configured to native-PCI > pciide0: using apic 2 int 18 for native-PCI interrupt > wd0 at pciide0 channel 0 drive 0: <ST9500420AS> > wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors > atapiscsi0 at pciide0 channel 0 drive 1 > scsibus0 at atapiscsi0: 2 targets > cd0 at scsibus0 targ 0 lun 0: <Optiarc, DVD+-RW AD-7250H, 100A> ATAPI 5/cdrom > removable > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6 > cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5 > "Intel 6 Series SMBus" rev 0x04 at pci0 dev 31 function 3 not configured > pciide1 at pci0 dev 31 function 5 "Intel 6 Series SATA" rev 0x04: DMA, > channel 0 wired to native-PCI, channel 1 wired to native-PCI > pciide1: using apic 2 int 18 for native-PCI interrupt > isa0 at mainbus0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > uhub2 at uhub0 port 1 "vendor 0x8087 product 0x0024" rev 2.00/0.00 addr 2 > umass0 at uhub2 port 2 configuration 1 interface 0 "Generic Mass Storage > Device" rev 2.00/1.00 addr 3 > umass0: using SCSI over Bulk-Only > scsibus1 at umass0: 2 targets, initiator 0 > sd0 at scsibus1 targ 1 lun 0: <Generic-, SD/MMC, 1.00> SCSI0 0/direct > removable > sd1 at scsibus1 targ 1 lun 1: <Generic-, Compact Flash, 1.01> SCSI0 0/direct > removable > sd2 at scsibus1 targ 1 lun 2: <Generic-, SM/xD Picture, 1.02> SCSI0 0/direct > removable > sd3 at scsibus1 targ 1 lun 3: <Generic-, MS/MS-Pro, 1.03> SCSI0 0/direct > removable > uhub3 at uhub1 port 1 "vendor 0x8087 product 0x0024" rev 2.00/0.00 addr 2 > umass1 at uhub3 port 3 configuration 1 interface 0 "Seagate Expansion" rev > 2.10/2.19 addr 3 > umass1: using SCSI over Bulk-Only > scsibus2 at umass1: 2 targets, initiator 0 > sd4 at scsibus2 targ 1 lun 0: <Seagate, Expansion, 0219> SCSI4 0/direct fixed > sd4: 953869MB, 512 bytes/sector, 1953525167 sectors > uhub4 at uhub3 port 4 "vendor 0x0424 product 0x2514" rev 2.00/b.b3 addr 4 > uhidev0 at uhub3 port 5 configuration 1 interface 0 "KINESIS FREESTYLE KB800 > KB800 Kinesis Freestyle" rev 1.10/1.22 addr 5 > uhidev0: iclass 3/1 > ukbd0 at uhidev0 > wskbd1 at ukbd0 mux 1 > wskbd1: connecting to wsdisplay0 > uhidev1 at uhub3 port 5 configuration 1 interface 1 "KINESIS FREESTYLE KB800 > KB800 Kinesis Freestyle" rev 1.10/1.22 addr 5 > uhidev1: iclass 3/0, 3 report ids > uhid at uhidev1 reportid 2 not configured > uhid at uhidev1 reportid 3 not configured > uhidev2 at uhub3 port 6 configuration 1 interface 0 "vendor 0x1bcf USB > Optical Mouse" rev 2.00/0.14 addr 6 > uhidev2: iclass 3/1, 2 report ids > uhid at uhidev2 reportid 1 not configured > uhid at uhidev2 reportid 2 not configured > softraid0 at root > scsibus3 at softraid0: 256 targets > root on rd0a swap on rd0b dump on rd0b > syncing disks... done > rebooting... > OpenBSD 5.6-current (GENERIC.MP) #362: Tue Sep 2 18:10:38 MDT 2014 > t...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > RTC BIOS diagnostic error 3f<config_unit,memory_size,fixed_disk,invalid_time> > real mem = 4153880576 (3961MB) > avail mem = 4034564096 (3847MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xf3f40 (80 entries) > bios0: vendor Dell Inc. version "A05" date 05/28/2011 > bios0: Dell Inc. OptiPlex 990 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP APIC TCPA MCFG HPET BOOT SSDT SSDT DMAR SLIC > acpi0: wakeup devices PS2K(S3) MOU_(S3) EHC1(S3) EHC2(S3) HDEF(S4) GLAN(S4) > PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) > PXSX(S4) RP05(S4) [...] > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292.95 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC > cpu0: 256KB 64b/line 8-way L2 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > cpu0: apic clock running at 99MHz > cpu0: mwait min=64, max=64, C-substates=0.2.1.1.0, IBE > cpu1 at mainbus0: apid 2 (application processor) > cpu1: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292.52 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC > cpu1: 256KB 64b/line 8-way L2 cache > cpu1: smt 0, core 1, package 0 > cpu2 at mainbus0: apid 4 (application processor) > cpu2: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292.52 MHz > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC > cpu2: 256KB 64b/line 8-way L2 cache > cpu2: smt 0, core 2, package 0 > cpu3 at mainbus0: apid 6 (application processor) > cpu3: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292.52 MHz > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC > cpu3: 256KB 64b/line 8-way L2 cache > cpu3: smt 0, core 3, package 0 > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 > acpihpet0 at acpi0: 14318179 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (RP01) > acpiprt2 at acpi0: bus -1 (RP02) > acpiprt3 at acpi0: bus 2 (RP03) > acpiprt4 at acpi0: bus -1 (RP04) > acpiprt5 at acpi0: bus -1 (RP05) > acpiprt6 at acpi0: bus -1 (RP06) > acpiprt7 at acpi0: bus -1 (RP07) > acpiprt8 at acpi0: bus -1 (RP08) > acpiprt9 at acpi0: bus -1 (PEG0) > acpiprt10 at acpi0: bus -1 (PEG1) > acpiprt11 at acpi0: bus -1 (PEG2) > acpiprt12 at acpi0: bus -1 (PEG3) > acpiprt13 at acpi0: bus 3 (P0P1) > acpicpu0 at acpi0: C3, C2, C1, PSS > acpicpu1 at acpi0: C3, C2, C1, PSS > acpicpu2 at acpi0: C3, C2, C1, PSS > acpicpu3 at acpi0: C3, C2, C1, PSS > acpibtn0 at acpi0: PWRB > acpivideo0 at acpi0: GFX0 > acpivout0 at acpivideo0: DD02 > cpu0: Enhanced SpeedStep 3292 MHz: speeds: 3301, 3300, 2800, 2600, 2400, > 2200, 2000, 1800, 1600 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09 > vga1 at pci0 dev 2 function 0 "Intel HD Graphics 2000" rev 0x09 > intagp at vga1 not configured > inteldrm0 at vga1 > drm0 at inteldrm0 > drm: Memory usable by graphics device = 2048M > inteldrm0: 1920x1080 > wsdisplay0 at vga1 mux 1: console (std, vt100 emulation) > wsdisplay0: screen 1-5 added (std, vt100 emulation) > "Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured > puc0 at pci0 dev 22 function 3 "Intel 6 Series KT" rev 0x04: ports: 1 com > com4 at puc0 port 0 apic 2 int 17: ns16550a, 16 byte fifo > com4: probed fifo depth: 0 bytes > em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address > 78:2b:cb:b6:d2:d4 > ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 16 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04: msi > azalia0: codecs: Realtek ALC269, Intel/0x2805, using Realtek ALC269 > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi > pci1 at ppb0 bus 1 > ppb1 at pci0 dev 28 function 2 "Intel 6 Series PCIE" rev 0xb4: msi > pci2 at ppb1 bus 2 > ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 17 > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa4 > pci3 at ppb2 bus 3 > pcib0 at pci0 dev 31 function 0 "Intel Q67 LPC" rev 0x04 > pciide0 at pci0 dev 31 function 2 "Intel 6 Series SATA" rev 0x04: DMA, > channel 0 configured to native-PCI, channel 1 configured to native-PCI > pciide0: using apic 2 int 18 for native-PCI interrupt > wd0 at pciide0 channel 0 drive 0: <ST9500420AS> > wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors > atapiscsi0 at pciide0 channel 0 drive 1 > scsibus1 at atapiscsi0: 2 targets > cd0 at scsibus1 targ 0 lun 0: <Optiarc, DVD+-RW AD-7250H, 100A> ATAPI 5/cdrom > removable > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6 > cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5 > ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic 2 int > 18 > iic0 at ichiic0 > spdmem0 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-10600 > spdmem1 at iic0 addr 0x53: 2GB DDR3 SDRAM PC3-10600 > pciide1 at pci0 dev 31 function 5 "Intel 6 Series SATA" rev 0x04: DMA, > channel 0 wired to native-PCI, channel 1 wired to native-PCI > pciide1: using apic 2 int 18 for native-PCI interrupt > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > lpt0 at isa0 port 0x378/4 irq 7 > uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 > umass0 at uhub2 port 2 configuration 1 interface 0 "Generic Mass Storage > Device" rev 2.00/1.00 addr 3 > umass0: using SCSI over Bulk-Only > scsibus2 at umass0: 2 targets, initiator 0 > sd0 at scsibus2 targ 1 lun 0: <Generic-, SD/MMC, 1.00> SCSI0 0/direct > removable > sd1 at scsibus2 targ 1 lun 1: <Generic-, Compact Flash, 1.01> SCSI0 0/direct > removable > sd2 at scsibus2 targ 1 lun 2: <Generic-, SM/xD Picture, 1.02> SCSI0 0/direct > removable > sd3 at scsibus2 targ 1 lun 3: <Generic-, MS/MS-Pro, 1.03> SCSI0 0/direct > removable > uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 > umass1 at uhub3 port 3 configuration 1 interface 0 "Seagate Expansion" rev > 2.10/2.19 addr 3 > umass1: using SCSI over Bulk-Only > scsibus3 at umass1: 2 targets, initiator 0 > sd4 at scsibus3 targ 1 lun 0: <Seagate, Expansion, 0219> SCSI4 0/direct fixed > sd4: 953869MB, 512 bytes/sector, 1953525167 sectors > uhub4 at uhub3 port 4 "Standard Microsystems product 0x2514" rev 2.00/b.b3 > addr 4 > uhidev0 at uhub3 port 5 configuration 1 interface 0 "KINESIS FREESTYLE KB800 > KB800 Kinesis Freestyle" rev 1.10/1.22 addr 5 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 variable keys, 6 key codes > wskbd1 at ukbd0 mux 1 > wskbd1: connecting to wsdisplay0 > uhidev1 at uhub3 port 5 configuration 1 interface 1 "KINESIS FREESTYLE KB800 > KB800 Kinesis Freestyle" rev 1.10/1.22 addr 5 > uhidev1: iclass 3/0, 3 report ids > uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0 > uhid1 at uhidev1 reportid 3: input=2, output=0, feature=0 > uhidev2 at uhub3 port 6 configuration 1 interface 0 "Sunplus USB Optical > Mouse" rev 2.00/0.14 addr 6 > uhidev2: iclass 3/1, 2 report ids > ums0 at uhidev2 reportid 1: 3 buttons, Z dir > wsmouse0 at ums0 mux 0 > uhid2 at uhidev2 reportid 2: input=1, output=0, feature=0 > vscsi0 at root > scsibus4 at vscsi0: 256 targets > softraid0 at root > scsibus5 at softraid0: 256 targets > root on wd0a (e7ded47759faeaf3.a) swap on wd0b dump on wd0b > syncing disks... done > rebooting... > OpenBSD 5.6-current (GENERIC.MP) #362: Tue Sep 2 18:10:38 MDT 2014 > t...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > RTC BIOS diagnostic error 3f<config_unit,memory_size,fixed_disk,invalid_time> > real mem = 4153880576 (3961MB) > avail mem = 4034564096 (3847MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xf3f40 (80 entries) > bios0: vendor Dell Inc. version "A05" date 05/28/2011 > bios0: Dell Inc. OptiPlex 990 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP APIC TCPA MCFG HPET BOOT SSDT SSDT DMAR SLIC > acpi0: wakeup devices PS2K(S3) MOU_(S3) EHC1(S3) EHC2(S3) HDEF(S4) GLAN(S4) > PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) > PXSX(S4) RP05(S4) [...] > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3293.02 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC > cpu0: 256KB 64b/line 8-way L2 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > cpu0: apic clock running at 99MHz > cpu0: mwait min=64, max=64, C-substates=0.2.1.1.0, IBE > cpu1 at mainbus0: apid 2 (application processor) > cpu1: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292.52 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC > cpu1: 256KB 64b/line 8-way L2 cache > cpu1: smt 0, core 1, package 0 > cpu2 at mainbus0: apid 4 (application processor) > cpu2: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292.52 MHz > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC > cpu2: 256KB 64b/line 8-way L2 cache > cpu2: smt 0, core 2, package 0 > cpu3 at mainbus0: apid 6 (application processor) > cpu3: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292.52 MHz > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC > cpu3: 256KB 64b/line 8-way L2 cache > cpu3: smt 0, core 3, package 0 > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 > acpihpet0 at acpi0: 14318179 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (RP01) > acpiprt2 at acpi0: bus -1 (RP02) > acpiprt3 at acpi0: bus 2 (RP03) > acpiprt4 at acpi0: bus -1 (RP04) > acpiprt5 at acpi0: bus -1 (RP05) > acpiprt6 at acpi0: bus -1 (RP06) > acpiprt7 at acpi0: bus -1 (RP07) > acpiprt8 at acpi0: bus -1 (RP08) > acpiprt9 at acpi0: bus -1 (PEG0) > acpiprt10 at acpi0: bus -1 (PEG1) > acpiprt11 at acpi0: bus -1 (PEG2) > acpiprt12 at acpi0: bus -1 (PEG3) > acpiprt13 at acpi0: bus 3 (P0P1) > acpicpu0 at acpi0: C3, C2, C1, PSS > acpicpu1 at acpi0: C3, C2, C1, PSS > acpicpu2 at acpi0: C3, C2, C1, PSS > acpicpu3 at acpi0: C3, C2, C1, PSS > acpibtn0 at acpi0: PWRB > acpivideo0 at acpi0: GFX0 > acpivout0 at acpivideo0: DD02 > cpu0: Enhanced SpeedStep 3293 MHz: speeds: 3301, 3300, 2800, 2600, 2400, > 2200, 2000, 1800, 1600 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09 > vga1 at pci0 dev 2 function 0 "Intel HD Graphics 2000" rev 0x09 > intagp at vga1 not configured > inteldrm0 at vga1 > drm0 at inteldrm0 > drm: Memory usable by graphics device = 2048M > inteldrm0: 1920x1080 > wsdisplay0 at vga1 mux 1: console (std, vt100 emulation) > wsdisplay0: screen 1-5 added (std, vt100 emulation) > "Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured > puc0 at pci0 dev 22 function 3 "Intel 6 Series KT" rev 0x04: ports: 1 com > com4 at puc0 port 0 apic 2 int 17: ns16550a, 16 byte fifo > com4: probed fifo depth: 0 bytes > em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address > 78:2b:cb:b6:d2:d4 > ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 16 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04: msi > azalia0: codecs: Realtek ALC269, Intel/0x2805, using Realtek ALC269 > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi > pci1 at ppb0 bus 1 > ppb1 at pci0 dev 28 function 2 "Intel 6 Series PCIE" rev 0xb4: msi > pci2 at ppb1 bus 2 > ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 17 > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa4 > pci3 at ppb2 bus 3 > pcib0 at pci0 dev 31 function 0 "Intel Q67 LPC" rev 0x04 > pciide0 at pci0 dev 31 function 2 "Intel 6 Series SATA" rev 0x04: DMA, > channel 0 configured to native-PCI, channel 1 configured to native-PCI > pciide0: using apic 2 int 18 for native-PCI interrupt > wd0 at pciide0 channel 0 drive 0: <ST9500420AS> > wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors > atapiscsi0 at pciide0 channel 0 drive 1 > scsibus1 at atapiscsi0: 2 targets > cd0 at scsibus1 targ 0 lun 0: <Optiarc, DVD+-RW AD-7250H, 100A> ATAPI 5/cdrom > removable > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6 > cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5 > ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic 2 int > 18 > iic0 at ichiic0 > spdmem0 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-10600 > spdmem1 at iic0 addr 0x53: 2GB DDR3 SDRAM PC3-10600 > pciide1 at pci0 dev 31 function 5 "Intel 6 Series SATA" rev 0x04: DMA, > channel 0 wired to native-PCI, channel 1 wired to native-PCI > pciide1: using apic 2 int 18 for native-PCI interrupt > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > lpt0 at isa0 port 0x378/4 irq 7 > uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 > umass0 at uhub2 port 2 configuration 1 interface 0 "Generic Mass Storage > Device" rev 2.00/1.00 addr 3 > umass0: using SCSI over Bulk-Only > scsibus2 at umass0: 2 targets, initiator 0 > sd0 at scsibus2 targ 1 lun 0: <Generic-, SD/MMC, 1.00> SCSI0 0/direct > removable > sd1 at scsibus2 targ 1 lun 1: <Generic-, Compact Flash, 1.01> SCSI0 0/direct > removable > sd2 at scsibus2 targ 1 lun 2: <Generic-, SM/xD Picture, 1.02> SCSI0 0/direct > removable > sd3 at scsibus2 targ 1 lun 3: <Generic-, MS/MS-Pro, 1.03> SCSI0 0/direct > removable > uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 > umass1 at uhub3 port 3 configuration 1 interface 0 "Seagate Expansion" rev > 2.10/2.19 addr 3 > umass1: using SCSI over Bulk-Only > scsibus3 at umass1: 2 targets, initiator 0 > sd4 at scsibus3 targ 1 lun 0: <Seagate, Expansion, 0219> SCSI4 0/direct fixed > sd4: 953869MB, 512 bytes/sector, 1953525167 sectors > uhub4 at uhub3 port 4 "Standard Microsystems product 0x2514" rev 2.00/b.b3 > addr 4 > uhidev0 at uhub3 port 5 configuration 1 interface 0 "KINESIS FREESTYLE KB800 > KB800 Kinesis Freestyle" rev 1.10/1.22 addr 5 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 variable keys, 6 key codes > wskbd1 at ukbd0 mux 1 > wskbd1: connecting to wsdisplay0 > uhidev1 at uhub3 port 5 configuration 1 interface 1 "KINESIS FREESTYLE KB800 > KB800 Kinesis Freestyle" rev 1.10/1.22 addr 5 > uhidev1: iclass 3/0, 3 report ids > uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0 > uhid1 at uhidev1 reportid 3: input=2, output=0, feature=0 > uhidev2 at uhub3 port 6 configuration 1 interface 0 "Sunplus USB Optical > Mouse" rev 2.00/0.14 addr 6 > uhidev2: iclass 3/1, 2 report ids > ums0 at uhidev2 reportid 1: 3 buttons, Z dir > wsmouse0 at ums0 mux 0 > uhid2 at uhidev2 reportid 2: input=1, output=0, feature=0 > vscsi0 at root > scsibus4 at vscsi0: 256 targets > softraid0 at root > scsibus5 at softraid0: 256 targets > root on wd0a (e7ded47759faeaf3.a) swap on wd0b dump on wd0b