Hi,
I bouth Huawei E3272 USB 4G LTE modem (with no HiLink - connecting using
serial ports, no ethernet card) and it would be nice to connect to
Internet from OpenBSD using this modem ;)
technical specification - http://www.huawei.com/ecommunity/bbs/10188081.html
dmesg:
OpenBSD 5.5 (GENERIC.MP) #315: Wed Mar 5 09:37:46 MST 2014
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 1862074368 (1775MB)
avail mem = 1803952128 (1720MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.34 @ 0xfcde0 (43 entries)
bios0: vendor American Megatrends Inc. version "786R6 v2.03" date 02/08/2011
bios0: Hewlett-Packard hp t5000 series
acpi0 at bios0: rev 0
acpi0: sleep states S0 S5
acpi0: tables DSDT FACP APIC MCFG OEMB HPET SSDT
acpi0: wakeup devices PCE2(S0) PCE3(S0) PCE4(S0) PCE5(S0) PCE6(S0)
PCE7(S0) PCE9(S0) PCEA(S0) PCEB(S0) PCEC(S0) SBAZ(S0) PS2K(S0) PS2M(S0)
P0PC(S0) UHC1(S0) UHC2(S0) [...]
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Turion(tm) X2 Ultra Dual-Core Mobile ZM-84, 2300.39 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,3DNOWP,OSVW,SKINIT,ITSC
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 200MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD Turion(tm) X2 Ultra Dual-Core Mobile ZM-84, 2300.13 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,3DNOWP,OSVW,SKINIT,ITSC
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
64b/line 16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 21, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318180 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P1)
acpiprt2 at acpi0: bus -1 (PCE2)
acpiprt3 at acpi0: bus -1 (PCE3)
acpiprt4 at acpi0: bus 2 (PCE7)
acpiprt5 at acpi0: bus -1 (PCEA)
acpiprt6 at acpi0: bus 3 (P0PC)
acpicpu0 at acpi0: PSS
acpicpu1 at acpi0: PSS
acpitz0 at acpi0: critical temperature is 120 degC
acpibtn0 at acpi0: PWRB
cpu0: 2300 MHz: speeds: 2300 1200 600 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD RS780 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "AMD RS780 PCIE" rev 0x00
pci1 at ppb0 bus 1
radeondrm0 at pci1 dev 5 function 0 "ATI Radeon HD 3200" rev 0x00
drm0 at radeondrm0
radeondrm0: apic 2 int 18
ppb1 at pci0 dev 7 function 0 "AMD RS780 PCIE" rev 0x00: msi
pci2 at ppb1 bus 2
bge0 at pci2 dev 0 function 0 "Broadcom BCM5787M" rev 0x02, BCM5754/5787
A2 (0xb002): msi, address 00:23:7d:cc:6b:94
brgphy0 at bge0 phy 1: BCM5787 10/100/1000baseT PHY, rev. 0
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 16,
version 1.0, legacy support
ohci1 at pci0 dev 18 function 1 "ATI SB700 USB" rev 0x00: apic 2 int 16,
version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17
ehci0: halt timeout
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
ohci2 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
ohci3 at pci0 dev 19 function 1 "ATI SB700 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 19
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x3a: SMI
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM
spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM
pciide0 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x00: DMA, channel
0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <1GB ATA Flash Disk>
wd0: 1-sector PIO, LBA, 977MB, 2001888 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4
azalia0 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x00: apic 2
int 16
azalia0: codecs: Realtek ALC262
audio0 at azalia0
pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x00
ppb2 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00
pci3 at ppb2 bus 3
pchb1 at pci0 dev 24 function 0 "AMD AMD64 11h HyperTransport" rev 0x40
pchb2 at pci0 dev 24 function 1 "AMD AMD64 11h Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 11h DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD AMD64 11h Misc Cfg" rev 0x00
pchb4 at pci0 dev 24 function 4 "AMD AMD64 11h Link Cfg" rev 0x00
usb2 at ohci0: USB revision 1.0
uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci2: USB revision 1.0
uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb5 at ohci3: USB revision 1.0
uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
scsibus1 at softraid0: 256 targets
root on wd0a (bb547cb10c3cf0e4.a) swap on wd0b dump on wd0b
drm: initializing kernel modesetting (RS780 0x1002:0x9610 0x103C:0x1721).
radeondrm0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
radeondrm0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
drm: PCIE GART of 512M enabled (table at 0x00000000C0040000).
No connectors reported connected with modes
Cannot find any crtc or sizes - going 1024x768
radeondrm0: 1024x768
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
modem connected:
umsm0 at uhub0 port 6 configuration 1 interface 0 "HUAWEI Technology
HUAWEI Mobile" rev 2.00/1.02 addr 2
umsm0 detached
urndis0 at uhub0 port 6 configuration 1 interface 0 "HUAWEI Technology
HUAWEI Mobile" rev 2.00/1.02 addr 2
urndis0: using Vendorurndis0: ctrl message error: wrong size 3736059565
> 1024
urndis0: unable to get query response
: unable to get hardware address
urndis1 at uhub0 port 6 configuration 1 interface 2 "HUAWEI Technology
HUAWEI Mobile" rev 2.00/1.02 addr 2
urndis1: using Vendorurndis1: ctrl message error: wrong size 3736059565
> 1024
urndis1: unable to get query response
: unable to get hardware address
umass0 at uhub0 port 6 configuration 1 interface 4 "HUAWEI Technology
HUAWEI Mobile" rev 2.00/1.02 addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd0 at scsibus2 targ 1 lun 0: <HUAWEI, TF CARD Storage, 2.31> SCSI2
0/direct removable
urndis2 at uhub0 port 6 configuration 1 interface 5 "HUAWEI Technology
HUAWEI Mobile" rev 2.00/1.02 addr 2
urndis2: no data interface
modem disconnected:
urndis0 detached
urndis1 detached
sd0 detached
scsibus2 detached
umass0 detached
urndis2 detached
usbdevs:
# usbdevs -dv
Controller /dev/usb0:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
ATI(0x1002), rev 1.00
uhub0
port 1 powered
port 2 powered
port 3 powered
port 4 powered
port 5 powered
port 6 addr 2: high speed, power 500 mA, config 1, HUAWEI
Mobile(0x1c1e), HUAWEI Technology(0x12d1), rev 1.02
urndis0
urndis1
umass0
urndis2
Controller /dev/usb1:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
ATI(0x1002), rev 1.00
uhub1
port 1 powered
port 2 powered
port 3 powered
port 4 powered
port 5 powered
port 6 powered
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000),
ATI(0x1002), rev 1.00
uhub2
port 1 powered
port 2 powered
port 3 powered
Controller /dev/usb3:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000),
ATI(0x1002), rev 1.00
uhub3
port 1 powered
port 2 powered
port 3 powered
Controller /dev/usb4:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000),
ATI(0x1002), rev 1.00
uhub4
port 1 powered
port 2 powered
port 3 powered
Controller /dev/usb5:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000),
ATI(0x1002), rev 1.00
uhub5
port 1 powered
port 2 powered
port 3 powered
Best Regards,
Michal
