Hi,
I did something stupid while configuring pf and locked myself out of my
server using ssh.
So I connected an older lcd-screen and a usb keyboard to my server to
get console access. Unfortunately the screen did no wake up and pressing
keys on the keyboards didn't help. I waited around 1 minute but the
screen didn't show anything. I rebooted the system by pressing the
powerbutton to get a working screen. I don't think this is supposed to
be right.
wsconsctl shows the following (default settings):
display.type=radeondrm
display.emulations=vt100
display.screentypes=std
display.focus=0
display.screen_on=250
display.screen_off=0
display.vblank=off
display.kbdact=on
display.msact=on
display.outact=on
As far as I understand the parameters,the screen shouldn't go blank at
all (display.screen_off=0) and wake up on keyboard actions
(display.kbdact=on). The man page wsdisplay is a bit difficult to
understand, so I am not sure I understand parameters. Any hints what I
need to configure differently?
thanks a lot for any tips
have a great day
Lars
Here is my dmesg:
OpenBSD 5.6-stable (GENERIC.MP) #3: Thu Dec 11 11:20:31 CET 2014
r...@dumper.lan:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 10686627840 (10191MB)
avail mem = 10393366528 (9911MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xfb330 (35 entries)
bios0: vendor HP version "O41" date 10/01/2013
bios0: HP ProLiant MicroServer
acpi0 at bios0: rev 2
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP APIC MCFG SPMI OEMB HPET EINJ BERT ERST HEST
SSDT
acpi0: wakeup devices PCE2(S4) PCE3(S4) PCE4(S4) PCE5(S4) PCE6(S4)
PCE7(S4) PCE9(S4) PCEA(S4) PCEB(S4) PCEC(S4) SBAZ(S4) P0PC(S4) PE20(S4)
PE21(S4) PE22(S4) PE23(S4)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Turion(tm) II Neo N54L Dual-Core Processor, 2196.66 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,NODEID,ITSC
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully
associative
cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully
associative
cpu0: AMD erratum 721 detected and fixed
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 199MHz
cpu0: mwait min=64, max=64, C-substates=0.0.0.0.0, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD Turion(tm) II Neo N54L Dual-Core Processor, 2196.36 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,NODEID,ITSC
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
64b/line 16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 16 4MB entries fully
associative
cpu1: DTLB 48 4KB entries fully associative, 48 4MB entries fully
associative
cpu1: AMD erratum 721 detected and fixed
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 21, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318180 Hz
acpi0: unable to load \\_SB_._INI.EXH1
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P1)
acpiprt2 at acpi0: bus -1 (PCE2)
acpiprt3 at acpi0: bus -1 (PCE4)
acpiprt4 at acpi0: bus 2 (PCE6)
acpicpu0 at acpi0: PSS
acpicpu1 at acpi0: PSS
acpibtn0 at acpi0: PWRB
ipmi at mainbus0 not configured
cpu0: 2196 MHz: speeds: 2200 1900 1600 1300 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD RS880 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 vendor "Hewlett-Packard", unknown product
0x9602 rev 0x00
pci1 at ppb0 bus 1
radeondrm0 at pci1 dev 5 function 0 "ATI Mobility Radeon HD 4200" rev
0x00
drm0 at radeondrm0
radeondrm0: apic 2 int 18
ppb1 at pci0 dev 6 function 0 "AMD RS780 PCIE" rev 0x00
pci2 at ppb1 bus 2
bge0 at pci2 dev 0 function 0 "Broadcom BCM5723" rev 0x10, BCM5784 A1
(0x5784100): msi, address 38:ea:a7:a6:04:2d
brgphy0 at bge0 phy 1: BCM5784 10/100/1000baseT PHY, rev. 4
ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x40: apic 2 int
19, AHCI 1.2
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, Samsung SSD 840, DXT0> SCSI3
0/direct fixed naa.50025385a0060dff
sd0: 114473MB, 512 bytes/sector, 234441648 sectors, thin
sd1 at scsibus1 targ 1 lun 0: <ATA, SAMSUNG HD154UI, 1AG0> SCSI3
0/direct fixed naa.50024e90037f1bad
sd1: 1430799MB, 512 bytes/sector, 2930277168 sectors
sd2 at scsibus1 targ 2 lun 0: <ATA, SAMSUNG HD154UI, 1AG0> SCSI3
0/direct fixed naa.50024e90037f1bae
sd2: 1430799MB, 512 bytes/sector, 2930277168 sectors
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x42: polling
iic0 at piixpm0
sdtemp0 at iic0 addr 0x18: cat34ts02
iic0: addr 0x19 00=00 01=00 02=00 03=00 04=00 05=c1 06=1b 07=0a 08=00
09=00 0a=00 0b=00 0c=00 0d=00 0e=00 0f=00 words 00=007f 01=0000 02=0000
03=0000 04=0000 05=c1d1 06=1b09 07=0a00
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM ECC PC3-10600 with thermal
sensor
spdmem1 at iic0 addr 0x51: 8GB DDR3 SDRAM ECC PC3-10600 with thermal
sensor
pciide0 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x40: DMA, channel
0 configured to compatibility, channel 1 configured to compatibility
pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x40
ppb2 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40
pci3 at ppb2 bus 3
ohci2 at pci0 dev 22 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
ehci2 at pci0 dev 22 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17
usb2 at ehci2: USB revision 2.0
uhub2 at usb2 "ATI EHCI root hub" rev 2.00/1.00 addr 1
pchb1 at pci0 dev 24 function 0 "AMD AMD64 10h HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 10h Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 10h DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD AMD64 10h Misc Cfg" rev 0x00
pchb4 at pci0 dev 24 function 4 "AMD AMD64 10h Link Cfg" rev 0x00
usb3 at ohci0: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci1: USB revision 1.0
uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
usb5 at ohci2: USB revision 1.0
uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1
uhidev0 at uhub3 port 5 configuration 1 interface 0 "Dell Dell USB
Keyboard" rev 1.10/3.06 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd0 at ukbd0: console keyboard
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd3 at scsibus3 targ 1 lun 0: <OPENBSD, SR RAID 1, 005> SCSI2 0/direct
fixed
sd3: 1430796MB, 512 bytes/sector, 2930271473 sectors
root on sd0a (260fbbdcd0c7be61.a) swap on sd0b dump on sd0b
drm: initializing kernel modesetting (RS880 0x1002:0x9712
0x103C:0x1609).
radeondrm0: VRAM: 32M 0x00000000C0000000 - 0x00000000C1FFFFFF (32M used)
radeondrm0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
drm: PCIE GART of 512M enabled (table at 0x00000000C0040000).
radeondrm0: 1680x1050
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using
wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
ukbd0: was console keyboard
wskbd0 detached
ukbd0 detached
uhidev0 detached
