Hi Lars, I am not bsd user. But some my boxes do checks during boot. If no monitor detected during boot. So port is inactive... and if monitor connected later... oh well... no output...
Sorry for a spam msg if wrong... On Thu, 19 Mar 2015 22:53 Lars <li...@srdn.de> wrote: > Hi, > > I did something stupid while configuring pf and locked myself out of my > server using ssh. > So I connected an older lcd-screen and a usb keyboard to my server to > get console access. Unfortunately the screen did no wake up and pressing > keys on the keyboards didn't help. I waited around 1 minute but the > screen didn't show anything. I rebooted the system by pressing the > powerbutton to get a working screen. I don't think this is supposed to > be right. > > wsconsctl shows the following (default settings): > > display.type=radeondrm > display.emulations=vt100 > display.screentypes=std > display.focus=0 > display.screen_on=250 > display.screen_off=0 > display.vblank=off > display.kbdact=on > display.msact=on > display.outact=on > > As far as I understand the parameters,the screen shouldn't go blank at > all (display.screen_off=0) and wake up on keyboard actions > (display.kbdact=on). The man page wsdisplay is a bit difficult to > understand, so I am not sure I understand parameters. Any hints what I > need to configure differently? > > thanks a lot for any tips > > have a great day > Lars > > > > Here is my dmesg: > > OpenBSD 5.6-stable (GENERIC.MP) #3: Thu Dec 11 11:20:31 CET 2014 > r...@dumper.lan:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 10686627840 (10191MB) > avail mem = 10393366528 (9911MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xfb330 (35 entries) > bios0: vendor HP version "O41" date 10/01/2013 > bios0: HP ProLiant MicroServer > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S4 S5 > acpi0: tables DSDT FACP APIC MCFG SPMI OEMB HPET EINJ BERT ERST HEST > SSDT > acpi0: wakeup devices PCE2(S4) PCE3(S4) PCE4(S4) PCE5(S4) PCE6(S4) > PCE7(S4) PCE9(S4) PCEA(S4) PCEB(S4) PCEC(S4) SBAZ(S4) P0PC(S4) PE20(S4) > PE21(S4) PE22(S4) PE23(S4) > acpitimer0 at acpi0: 3579545 Hz, 32 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: AMD Turion(tm) II Neo N54L Dual-Core Processor, 2196.66 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, > CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT, > CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,3DNOW2,3DNOW, > LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW, > IBS,SKINIT,NODEID,ITSC > cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB > 64b/line 16-way L2 cache > cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully > associative > cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully > associative > cpu0: AMD erratum 721 detected and fixed > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > cpu0: apic clock running at 199MHz > cpu0: mwait min=64, max=64, C-substates=0.0.0.0.0, IBE > cpu1 at mainbus0: apid 1 (application processor) > cpu1: AMD Turion(tm) II Neo N54L Dual-Core Processor, 2196.36 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, > CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT, > CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,3DNOW2,3DNOW, > LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW, > IBS,SKINIT,NODEID,ITSC > cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB > 64b/line 16-way L2 cache > cpu1: ITLB 32 4KB entries fully associative, 16 4MB entries fully > associative > cpu1: DTLB 48 4KB entries fully associative, 48 4MB entries fully > associative > cpu1: AMD erratum 721 detected and fixed > cpu1: smt 0, core 1, package 0 > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 21, 24 pins > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 > acpihpet0 at acpi0: 14318180 Hz > acpi0: unable to load \\_SB_._INI.EXH1 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (P0P1) > acpiprt2 at acpi0: bus -1 (PCE2) > acpiprt3 at acpi0: bus -1 (PCE4) > acpiprt4 at acpi0: bus 2 (PCE6) > acpicpu0 at acpi0: PSS > acpicpu1 at acpi0: PSS > acpibtn0 at acpi0: PWRB > ipmi at mainbus0 not configured > cpu0: 2196 MHz: speeds: 2200 1900 1600 1300 800 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "AMD RS880 Host" rev 0x00 > ppb0 at pci0 dev 1 function 0 vendor "Hewlett-Packard", unknown product > 0x9602 rev 0x00 > pci1 at ppb0 bus 1 > radeondrm0 at pci1 dev 5 function 0 "ATI Mobility Radeon HD 4200" rev > 0x00 > drm0 at radeondrm0 > radeondrm0: apic 2 int 18 > ppb1 at pci0 dev 6 function 0 "AMD RS780 PCIE" rev 0x00 > pci2 at ppb1 bus 2 > bge0 at pci2 dev 0 function 0 "Broadcom BCM5723" rev 0x10, BCM5784 A1 > (0x5784100): msi, address 38:ea:a7:a6:04:2d > brgphy0 at bge0 phy 1: BCM5784 10/100/1000baseT PHY, rev. 4 > ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x40: apic 2 int > 19, AHCI 1.2 > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 0 lun 0: <ATA, Samsung SSD 840, DXT0> SCSI3 > 0/direct fixed naa.50025385a0060dff > sd0: 114473MB, 512 bytes/sector, 234441648 sectors, thin > sd1 at scsibus1 targ 1 lun 0: <ATA, SAMSUNG HD154UI, 1AG0> SCSI3 > 0/direct fixed naa.50024e90037f1bad > sd1: 1430799MB, 512 bytes/sector, 2930277168 sectors > sd2 at scsibus1 targ 2 lun 0: <ATA, SAMSUNG HD154UI, 1AG0> SCSI3 > 0/direct fixed naa.50024e90037f1bae > sd2: 1430799MB, 512 bytes/sector, 2930277168 sectors > ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18, > version 1.0, legacy support > ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1 > ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18, > version 1.0, legacy support > ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17 > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1 > piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x42: polling > iic0 at piixpm0 > sdtemp0 at iic0 addr 0x18: cat34ts02 > iic0: addr 0x19 00=00 01=00 02=00 03=00 04=00 05=c1 06=1b 07=0a 08=00 > 09=00 0a=00 0b=00 0c=00 0d=00 0e=00 0f=00 words 00=007f 01=0000 02=0000 > 03=0000 04=0000 05=c1d1 06=1b09 07=0a00 > spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM ECC PC3-10600 with thermal > sensor > spdmem1 at iic0 addr 0x51: 8GB DDR3 SDRAM ECC PC3-10600 with thermal > sensor > pciide0 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x40: DMA, channel > 0 configured to compatibility, channel 1 configured to compatibility > pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x40 > ppb2 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40 > pci3 at ppb2 bus 3 > ohci2 at pci0 dev 22 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18, > version 1.0, legacy support > ehci2 at pci0 dev 22 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17 > usb2 at ehci2: USB revision 2.0 > uhub2 at usb2 "ATI EHCI root hub" rev 2.00/1.00 addr 1 > pchb1 at pci0 dev 24 function 0 "AMD AMD64 10h HyperTransport" rev 0x00 > pchb2 at pci0 dev 24 function 1 "AMD AMD64 10h Address Map" rev 0x00 > pchb3 at pci0 dev 24 function 2 "AMD AMD64 10h DRAM Cfg" rev 0x00 > km0 at pci0 dev 24 function 3 "AMD AMD64 10h Misc Cfg" rev 0x00 > pchb4 at pci0 dev 24 function 4 "AMD AMD64 10h Link Cfg" rev 0x00 > usb3 at ohci0: USB revision 1.0 > uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > usb4 at ohci1: USB revision 1.0 > uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > usb5 at ohci2: USB revision 1.0 > uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > uhidev0 at uhub3 port 5 configuration 1 interface 0 "Dell Dell USB > Keyboard" rev 1.10/3.06 addr 2 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 variable keys, 6 key codes > wskbd0 at ukbd0: console keyboard > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > sd3 at scsibus3 targ 1 lun 0: <OPENBSD, SR RAID 1, 005> SCSI2 0/direct > fixed > sd3: 1430796MB, 512 bytes/sector, 2930271473 sectors > root on sd0a (260fbbdcd0c7be61.a) swap on sd0b dump on sd0b > drm: initializing kernel modesetting (RS880 0x1002:0x9712 > 0x103C:0x1609). > radeondrm0: VRAM: 32M 0x00000000C0000000 - 0x00000000C1FFFFFF (32M used) > radeondrm0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF > drm: PCIE GART of 512M enabled (table at 0x00000000C0040000). > radeondrm0: 1680x1050 > wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using > wskbd0 > wsdisplay0: screen 1-5 added (std, vt100 emulation) > ukbd0: was console keyboard > wskbd0 detached > ukbd0 detached > uhidev0 detached
