On Wed, Apr 29, 2015 at 04:29:05PM -0300, Cristián Edwards wrote: > Problem is that only the ugen driver is present... so I think there is no > chance of speaking with the modem.
Didn't see that on the full dmesg you s... oh wait. ;) > Will read the link thoruoughly Without ucom devices I'd say you don't have much luck... Again, a full dmesg would be handy. Maybe it needs a new driver, maybe the kernel just needs to be told how to recognize it. Maybe you just need to upgrade to -current. Have I mentioned that a full dmesg would allow us to know which version you're running? Nagging aside, best of luck. Cheers Zé > On Wed, Apr 29, 2015 at 4:27 PM, Z?? Loff <zel...@zeloff.org> wrote: > > > On Wed, Apr 29, 2015 at 12:34:12PM -0300, Cristi??n Edwards wrote: > > > Hello, > > > > > > How to configure cdce0 device in OpenBSD? > > > > > > Dmesg: > > > cdce0 at uhub1 port 1 configuration 2 interface 0 "Huawei Technologies > > > HUAWEI Mobile" rev 2.00/0.00 addr 2 cdce0: address 00:a0:c6:60:85:70 > > > ugen0 at uhub1 port 1 configuration 2 "Huawei Technologies HUAWEI Mobile" > > > rev 2.00/0.00 addr 2 > > > cdce0: flags=28843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,NOINET6> mtu > > > 1500 lladdr 00:a0:c6:60:85:70 priority: 0 > > > > > > ifconfig: > > > cdce0: flags=28843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,NOINET6> mtu > > > 1500 > > > lladdr 00:a0:c6:60:85:70 > > > priority: 0 > > > > > > > > > Hardware: > > > > > > http://consumer.huawei.com/en/solutions/m2m-solutions/products/tech-specs/mu6 > 09-en.htm > > > > > > Regards, > > > > > > Cristian > > > > > > > You probably need to bring up the modem first. See this message (and > > rest of thread) as well as the thread it quotes: > > > > http://marc.info/?l=openbsd-misc&m=142213746124451&w=2 > > > > Cheers > > Z?? > > > > -- > --
