Hi guys I tested with a wired Logitech keyboard (same as originally posted) and wireless Logitech mouse (that I use for my laptops) and nothing detached. This seems very strange that from a wired mouse to a wireless mouse would stop the detachment. Since Luciano tried his Microsoft wired/wireless mouse and had the same detachment issue with both. Again I'll post any new findings.
On Tuesday, August 18, 2015, Vijay Sankar <vsan...@foretell.ca> wrote: > Just out of curiousity, I tried this on my desktop workstation (5.7 > -stable, AMD64) with a Microsoft Mouse and a Microsoft Keyboard. I normally > use KDE4 so don't see any of the console messages. So wanted to check if > the messages come up on a system without the KVM. > > It does on this system as well. Did not see any difference after removing > USB 3.0 support so went back to the default settings > > uhidev1 at uhub4 port 5 configuration 1 interface 0 "Microsoft Microsoft > Basic Optical Mouse" rev 1.10/1.04 addr 4 > uhidev1: iclass 3/1 > ums0 at uhidev1: 3 buttons, Z dir > wsmouse0 at ums0 mux 0 > wsmouse0 detached > ums0 detached > uhidev1 detached > uhidev1 at uhub4 port 5 configuration 1 interface 0 "Microsoft Microsoft > Basic Optical Mouse" rev 1.10/1.04 addr 4 > uhidev1: iclass 3/1 > ums0 at uhidev1: 3 buttons, Z dir > wsmouse0 at ums0 mux 0 > > > > > Quoting Luciano Rottava da Silva <rott...@gmail.com>: > > Thatôs exactly my approach as well. (-: >> >> Boot the machine and switch to another tty. So looks like issue is much >> older than I thought. >> >> By the way, I have a mechanical brown cherry switch japanese keyboard and >> also I HHKB, and both work perfectly. On the other hand, both mice have >> this behaviour. >> >> >> On 18 August 2015 at 09:40, Vijay Sankar <vsan...@foretell.ca> wrote: >> >> I have had the same issue going back to OpenBSD 4.x ever since I changed >>> the KVM that had PS2 mouse and keyboard to a KVM with USB mouse etc. As a >>> result I always thought it was because of my KVM, so did not report it >>> all >>> these years!!! >>> >>> Anyways, my caveman like approach to solve this was to do a CTRL-ALT-F2 >>> if >>> I had to do anything with vi etc. >>> >>> Vijay >>> >>> Quoting Shaun Reiger <srei...@sprmail.net>: >>> >>> Ok so I use a cheep Logitech K120 keyboard and mouse that are plugged in >>> to >>> >>>> the usb 2 ports when I see the detach messages. But I tried a test with >>>> a >>>> combined keyboard/mouse also a Logitech model K400r and I haven't seen >>>> any >>>> detach messages. This was also plugged into the same usb 2 port. I have >>>> a >>>> HHKB keyboard which also doesn't illicit any detach message. These >>>> detach >>>> message may only be caused by specific keyboard and mouse models. >>>> >>>> I'll keep testing and post any findings. >>>> >>>> >>>> >>>> On Monday, August 17, 2015, Luciano Rottava da Silva <rott...@gmail.com >>>> > >>>> wrote: >>>> >>>> Here it is my dmesg: >>>> >>>>> >>>>> OpenBSD 5.7 (GENERIC.MP) #881: Sun Mar 8 11:04:17 MDT 2015 >>>>> dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/ >>>>> GENERIC.MP >>>>> real mem = 8015122432 (7643MB) >>>>> avail mem = 7797841920 (7436MB) >>>>> mpath0 at root >>>>> scsibus0 at mpath0: 256 targets >>>>> mainbus0 at root >>>>> bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xeb0d0 (56 entries) >>>>> bios0: vendor American Megatrends Inc. version "1609" date 01/07/2014 >>>>> bios0: ASUSTeK COMPUTER INC. F1A55-M LE >>>>> acpi0 at bios0: rev 2 >>>>> acpi0: sleep states S0 S3 S4 S5 >>>>> acpi0: tables DSDT FACP APIC MCFG HPET SSDT SSDT >>>>> acpi0: wakeup devices SBAZ(S4) PS2K(S4) PS2M(S4) UAR1(S4) UHC1(S4) >>>>> UHC2(S4) USB3(S4) UHC4(S4) USB5(S4) UHC6(S4) UHC7(S4) PE20(S4) >>>>> PE21(S4) RLAN(S4) PE22(S4) PE23(S4) [...] >>>>> acpitimer0 at acpi0: 3579545 Hz, 32 bits >>>>> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat >>>>> cpu0 at mainbus0: apid 0 (boot processor) >>>>> cpu0: AMD A6-3500 APU with Radeon(tm) HD Graphics, 2100.18 MHz >>>>> cpu0: >>>>> >>>>> >>>>> >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS >> >> H,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,3D >> >> NOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKIN >> IT,ITSC >> >>> cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB >>>>> 64b/line 16-way L2 cache >>>>> cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully >>>>> associative >>>>> cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully >>>>> associative >>>>> cpu0: AMD erratum 721 detected and fixed >>>>> cpu0: smt 0, core 0, package 0 >>>>> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges >>>>> cpu0: apic clock running at 199MHz >>>>> cpu0: mwait min=64, max=64, C-substates=0.0.0.0.0, IBE >>>>> cpu1 at mainbus0: apid 1 (application processor) >>>>> cpu1: AMD A6-3500 APU with Radeon(tm) HD Graphics, 2099.94 MHz >>>>> cpu1: >>>>> >>>>> >>>>> >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS >> >> H,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,3D >> >> NOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKIN >> IT,ITSC >> >>> cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB >>>>> 64b/line 16-way L2 cache >>>>> cpu1: ITLB 32 4KB entries fully associative, 16 4MB entries fully >>>>> associative >>>>> cpu1: DTLB 48 4KB entries fully associative, 48 4MB entries fully >>>>> associative >>>>> cpu1: AMD erratum 721 detected and fixed >>>>> cpu1: smt 0, core 1, package 0 >>>>> cpu2 at mainbus0: apid 2 (application processor) >>>>> cpu2: AMD A6-3500 APU with Radeon(tm) HD Graphics, 2099.94 MHz >>>>> cpu2: >>>>> >>>>> >>>>> >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS >> >> H,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,3D >> >> NOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKIN >> IT,ITSC >> >>> cpu2: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB >>>>> 64b/line 16-way L2 cache >>>>> cpu2: ITLB 32 4KB entries fully associative, 16 4MB entries fully >>>>> associative >>>>> cpu2: DTLB 48 4KB entries fully associative, 48 4MB entries fully >>>>> associative >>>>> cpu2: AMD erratum 721 detected and fixed >>>>> cpu2: smt 0, core 2, package 0 >>>>> ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins >>>>> acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 >>>>> acpihpet0 at acpi0: 14318180 Hz >>>>> acpiprt0 at acpi0: bus 0 (PCI0) >>>>> acpiprt1 at acpi0: bus 2 (PE20) >>>>> acpiprt2 at acpi0: bus 3 (PE21) >>>>> acpiprt3 at acpi0: bus -1 (PE22) >>>>> acpiprt4 at acpi0: bus -1 (PE23) >>>>> acpiprt5 at acpi0: bus -1 (BR13) >>>>> acpiprt6 at acpi0: bus -1 (PCE2) >>>>> acpiprt7 at acpi0: bus -1 (PCE4) >>>>> acpiprt8 at acpi0: bus 1 (P0PC) >>>>> acpicpu0 at acpi0: C2, PSS >>>>> acpicpu1 at acpi0: C2, PSS >>>>> acpicpu2 at acpi0: C2, PSS >>>>> acpibtn0 at acpi0: PWRB >>>>> cpu0: 2100 MHz: speeds: 2100 1900 1600 1400 1200 1000 800 MHz >>>>> pci0 at mainbus0 bus 0 >>>>> pchb0 at pci0 dev 0 function 0 "AMD AMD64 12h Host" rev 0x00 >>>>> radeondrm0 at pci0 dev 1 function 0 "ATI Radeon HD 6530D" rev 0x00 >>>>> drm0 at radeondrm0 >>>>> radeondrm0: msi >>>>> ahci0 at pci0 dev 17 function 0 "AMD Hudson-2 SATA" rev 0x40: msi, AHCI >>>>> 1.3 >>>>> scsibus1 at ahci0: 32 targets >>>>> sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD5000AAKX-0, 15.0> SCSI3 >>>>> 0/direct fixed naa.50014ee0adec84e1 >>>>> sd0: 476940MB, 512 bytes/sector, 976773168 sectors >>>>> cd0 at scsibus1 targ 2 lun 0: <Optiarc, DVD RW AD-7280S, 1.01> ATAPI >>>>> 5/cdrom removable >>>>> ohci0 at pci0 dev 18 function 0 "AMD Hudson-2 USB" rev 0x11: apic 4 >>>>> int 18, version 1.0, legacy support >>>>> ehci0 at pci0 dev 18 function 2 "AMD Hudson-2 USB2" rev 0x11: apic 4 >>>>> int >>>>> 17 >>>>> usb0 at ehci0: USB revision 2.0 >>>>> uhub0 at usb0 "AMD EHCI root hub" rev 2.00/1.00 addr 1 >>>>> ohci1 at pci0 dev 19 function 0 "AMD Hudson-2 USB" rev 0x11: apic 4 >>>>> int 18, version 1.0, legacy support >>>>> ehci1 at pci0 dev 19 function 2 "AMD Hudson-2 USB2" rev 0x11: apic 4 >>>>> int >>>>> 17 >>>>> usb1 at ehci1: USB revision 2.0 >>>>> uhub1 at usb1 "AMD EHCI root hub" rev 2.00/1.00 addr 1 >>>>> piixpm0 at pci0 dev 20 function 0 "AMD Hudson-2 SMBus" rev 0x13: >>>>> polling >>>>> iic0 at piixpm0 >>>>> iic0: addr 0x20 01=0d 02=17 03=26 04=00 05=00 06=00 07=00 08=00 09=00 >>>>> 0a=10 0b=10 0c=10 0d=10 0e=08 0f=8c 10=00 11=00 12=00 13=00 14=00 >>>>> 15=0f 16=1f 17=20 18=e0 19=fb 1a=a8 1b=a3 1c=ac 1d=80 1e=04 1f=03 >>>>> 20=09 21=09 22=09 23=09 24=37 3e=a3 words 00=ff0d 01=0d17 02=1726 >>>>> 03=2600 04=0000 05=0000 06=0000 07=0000 >>>>> spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 >>>>> "eeprom" at iic0 addr 0x51 not configured >>>>> azalia0 at pci0 dev 20 function 2 "AMD Hudson-2 HD Audio" rev 0x01: >>>>> apic 4 int 16 >>>>> azalia0: codecs: Realtek/0x0887 >>>>> audio0 at azalia0 >>>>> pcib0 at pci0 dev 20 function 3 "AMD Hudson-2 LPC" rev 0x11 >>>>> ppb0 at pci0 dev 20 function 4 "AMD Hudson-2 PCI" rev 0x40 >>>>> pci1 at ppb0 bus 1 >>>>> ohci2 at pci0 dev 20 function 5 "AMD Hudson-2 USB" rev 0x11: apic 4 >>>>> int 18, version 1.0, legacy support >>>>> ppb1 at pci0 dev 21 function 0 "AMD Hudson-2 PCIE" rev 0x00 >>>>> pci2 at ppb1 bus 2 >>>>> ppb2 at pci0 dev 21 function 1 "AMD Hudson-2 PCIE" rev 0x00 >>>>> pci3 at ppb2 bus 3 >>>>> re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x06: >>>>> RTL8168E/8111E-VL (0x2c80), msi, address 14:da:e9:ef:25:18 >>>>> rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 5 >>>>> ohci3 at pci0 dev 22 function 0 "AMD Hudson-2 USB" rev 0x11: apic 4 >>>>> int 18, version 1.0, legacy support >>>>> ehci2 at pci0 dev 22 function 2 "AMD Hudson-2 USB2" rev 0x11: apic 4 >>>>> int >>>>> 17 >>>>> usb2 at ehci2: USB revision 2.0 >>>>> uhub2 at usb2 "AMD EHCI root hub" rev 2.00/1.00 addr 1 >>>>> pchb1 at pci0 dev 24 function 0 "AMD AMD64 14h Link Cfg" rev 0x43 >>>>> pchb2 at pci0 dev 24 function 1 "AMD AMD64 14h Address Map" rev 0x00 >>>>> pchb3 at pci0 dev 24 function 2 "AMD AMD64 14h DRAM Cfg" rev 0x00 >>>>> km0 at pci0 dev 24 function 3 "AMD AMD64 14h Misc Cfg" rev 0x00 >>>>> pchb4 at pci0 dev 24 function 4 "AMD AMD64 14h CPU Power" rev 0x00 >>>>> pchb5 at pci0 dev 24 function 5 "AMD AMD64 14h Reserved" rev 0x00 >>>>> pchb6 at pci0 dev 24 function 6 "AMD AMD64 14h NB Power" rev 0x00 >>>>> pchb7 at pci0 dev 24 function 7 "AMD AMD64 14h Reserved" rev 0x00 >>>>> usb3 at ohci0: USB revision 1.0 >>>>> uhub3 at usb3 "AMD OHCI root hub" rev 1.00/1.00 addr 1 >>>>> usb4 at ohci1: USB revision 1.0 >>>>> uhub4 at usb4 "AMD OHCI root hub" rev 1.00/1.00 addr 1 >>>>> isa0 at pcib0 >>>>> isadma0 at isa0 >>>>> pckbc0 at isa0 port 0x60/5 >>>>> pckbd0 at pckbc0 (kbd slot) >>>>> pckbc0: using irq 1 for kbd slot >>>>> wskbd0 at pckbd0: console keyboard >>>>> pcppi0 at isa0 port 0x61 >>>>> spkr0 at pcppi0 >>>>> usb5 at ohci2: USB revision 1.0 >>>>> uhub5 at usb5 "AMD OHCI root hub" rev 1.00/1.00 addr 1 >>>>> usb6 at ohci3: USB revision 1.0 >>>>> uhub6 at usb6 "AMD OHCI root hub" rev 1.00/1.00 addr 1 >>>>> urtwn0 at uhub2 port 2 "802.11n USB WLAN" rev 2.00/2.00 addr 2 >>>>> urtwn0: MAC/BB RTL8192CU, RF 6052 2T2R, address a0:f3:c1:17:ca:22 >>>>> uhidev0 at uhub3 port 3 configuration 1 interface 0 "Heng Yu >>>>> Technology Pure Pro" rev 1.10/1.00 addr 2 >>>>> uhidev0: iclass 3/1 >>>>> ukbd0 at uhidev0: 8 variable keys, 6 key codes >>>>> wskbd1 at ukbd0 mux 1 >>>>> uhidev1 at uhub3 port 3 configuration 1 interface 1 "Heng Yu >>>>> Technology Pure Pro" rev 1.10/1.00 addr 2 >>>>> uhidev1: iclass 3/0, 3 report ids >>>>> uhid0 at uhidev1 reportid 1: input=0, output=0, feature=7 >>>>> uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0 >>>>> uhid2 at uhidev1 reportid 3: input=3, output=0, feature=0 >>>>> uhidev2 at uhub3 port 4 configuration 1 interface 0 "Microsoft >>>>> Microsoft Basic Optical Mouse v2.0" rev 1.10/1.04 addr 3 >>>>> uhidev2: iclass 3/1 >>>>> ums0 at uhidev2: 3 buttons, Z dir >>>>> wsmouse0 at ums0 mux 0 >>>>> vscsi0 at root >>>>> scsibus2 at vscsi0: 256 targets >>>>> softraid0 at root >>>>> scsibus3 at softraid0: 256 targets >>>>> root on sd0a (21999d7538f1f0a2.a) swap on sd0b dump on sd0b >>>>> radeondrm0: 1920x1080 >>>>> wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using >>>>> wskbd0 >>>>> wskbd1: connecting to wsdisplay0 >>>>> wsdisplay0: screen 1-5 added (std, vt100 emulation) >>>>> wsmouse0 detached >>>>> ums0 detached >>>>> uhidev2 detached >>>>> uhidev2 at uhub3 port 4 configuration 1 interface 0 "Microsoft >>>>> Microsoft Basic Optical Mouse v2.0" rev 1.10/1.04 addr 3 >>>>> uhidev2: iclass 3/1 >>>>> ums0 at uhidev2: 3 buttons, Z dir >>>>> wsmouse0 at ums0 mux 0 >>>>> >>>>> >>>>> Now I'm using a wired basic MS mouse. >>>>> >>>>> Cheers, >>>>> Luciano. >>>>> >>>>> On 16 August 2015 at 15:48, Luciano Rottava da Silva < >>>>> rott...@gmail.com >>>>> <javascript:;>> >>>>> >>>>> wrote: >>>>> >>>>> > Hi folks, >>>>> > >>>>> > I am running an OpenBSD 5.7 on amd64 with the very few packages >>>>> which I >>>>> > require for lean desktop. And as usual, pretty much everything is >>>>> working. >>>>> > >>>>> > The only glitch is the mouse support, or maybe my devices. >>>>> > >>>>> > Every minute or so USB mouse detaches itself, and this happens in >>>>> console >>>>> > mode after booting the machine, and keeps on. >>>>> > >>>>> > This is what I get in ttyC0: >>>>> > >>>>> > ums0 detached >>>>> > uhidev2 detached >>>>> > uhidev2 at uhub3 port 4 configuration 1 interface 0 "Microsoft >>>>> Microsoft >>>>> > Basic Optical Mouse v2.0" rev 1.10/1.04 addr 3 >>>>> > uhidev2: iclass 3/1 >>>>> > ums0 at uhidev2: 3 buttons, Z dir >>>>> > wsmouse0 at ums0 mux 0 >>>>> > wsmouse0 detached >>>>> > ums0 detached >>>>> > uhidev2 detached >>>>> > uhidev2 at uhub3 port 4 configuration 1 interface 0 "Microsoft >>>>> Microsoft >>>>> > Basic Optical Mouse v2.0" rev 1.10/1.04 addr 3 >>>>> > uhidev2: iclass 3/1 >>>>> > ums0 at uhidev2: 3 buttons, Z dir >>>>> > wsmouse0 at ums0 mux 0 >>>>> > >>>>> > I have two MS basic optical mouse, one wired and another wireless. >>>>> The >>>>> > behaviour is exactly the same. >>>>> > >>>>> > wsmoused is not running, and I have nothing in my xorg.conf >>>>> (actually I >>>>> > don't have a xorg.conf). >>>>> > >>>>> > I've found only one reference to a similar problem in misc@ but, >>>>> > unfortunatelly, there was no reply. >>>>> > >>>>> > So, any suggestion? Important to highlight that in X mouse works >>>>> > perfectly. It's just those annoying messages that keep popping up in >>>>> the >>>>> > console that bothers me. >>>>> > >>>>> > Cheers, >>>>> > Luciano. >>>>> >>>>> >>>>> >>>>> -- >>>> Shaun >>>> >>>> "Ars longa, vita brevis, occasio praeceps, experimentum periculosum, >>>> iudicium difficile" - Hippocrates (c. 400BC) >>>> >>>> >>> >>> -- >>> Vijay Sankar, M.Eng., P.Eng. >>> ForeTell Technologies Limited >>> vsan...@foretell.ca >>> >> > > -- > Vijay Sankar, M.Eng., P.Eng. > ForeTell Technologies Limited > vsan...@foretell.ca > > -- Shaun "Ars longa, vita brevis, occasio praeceps, experimentum periculosum, iudicium difficile" - Hippocrates (c. 400BC)
