howdee,
im monitoring this thread cautiously since i dont know what im doing
sometimes...
i noticed similar behaviour with my mouse - but had attributed the messages
to the fact
that i use a manual kvm-switch... so whenever i "switched" i was certain
it had triggered...
i will enclose my dmesg as well - but maybe the other folks are getting
their messages
for similar types of reasons ? ( eg - vm switch ? hub powering down ? )
On Tue, Aug 18, 2015 at 2:45 PM, L.R. D.S. <arrowscr...@mail.com> wrote:
> Same problem, build #1024. This output not just flood all tty, but also my
> dmesg
> (no output in "# dmesg" except the bellow):
>
> wsmouse1 detached
> ums1 detached
> uhidev2 detached
> uhidev2 at uhub3 port 6 configuration 1 interface 0 "Logitech USB Optical
> Mouse" rev 2.00/63.00 addr 4
> uhidev2: iclass 3/1
> ums1 at uhidev2: 3 buttons, Z dir
> wsmouse1 at ums1 mux 0
>
> Probably not a problem in USB 3.0, since I had the same issue on old
> builds in
> a hardware with USB 2.0.
> I'll follow this thread, because this is really annoying for me (I need to
> remove
> my mouse everytime I do something in tty).
>
>
--
harold at hfelton.com
OpenBSD 5.7 (GENERIC) #738: Sun Mar 8 10:59:31 MDT 2015
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) CPU 2.53GHz ("GenuineIntel" 686-class) 2.53 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,CNXT-ID,xTPR,PERF
real mem = 2138001408 (2038MB)
avail mem = 2090708992 (1993MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 01/03/06, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.3 @
0xf0450 (59 entries)
bios0: vendor Dell Computer Corporation version "A01" date 01/03/2006
bios0: Dell Computer Corporation Dell DE051
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP SSDT APIC BOOT
acpi0: wakeup devices VBTN(S4) PCI0(S3) USB0(S3) USB1(S3) USB2(S3) USB3(S3)
PCI1(S5) KBD_(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 132MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PCI1)
acpicpu0 at acpi0
acpibtn0 at acpi0: VBTN
bios0: ROM list: 0xc0000/0xa800 0xca800/0x1800!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82865G Host" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82865G Video" rev 0x02
intagp0 at vga1
agp0 at intagp0: aperture at 0xe8000000, size 0x8000000
inteldrm0 at vga1
drm0 at inteldrm0
inteldrm0: 1280x1024
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: apic 1 int 16
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: apic 1 int 19
uhci2 at pci0 dev 29 function 3 "Intel 82801EB/ER USB" rev 0x02: apic 1 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: apic 1 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xc2
pci1 at ppb0 bus 1
uhci3 at pci1 dev 1 function 0 "VIA VT83C572 USB" rev 0x62: apic 1 int 22
uhci4 at pci1 dev 1 function 1 "VIA VT83C572 USB" rev 0x62: apic 1 int 21
ehci1 at pci1 dev 1 function 2 "VIA VT6202 USB" rev 0x65: apic 1 int 20
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "VIA EHCI root hub" rev 2.00/1.00 addr 1
fxp0 at pci1 dev 8 function 0 "Intel PRO/100 VE" rev 0x02, i82562: apic 1 int
20, address 00:16:76:39:fb:e0
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
usb2 at uhci3: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci4: USB revision 1.0
uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA, channel
0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD1600JB-75GVA0>
wd0: 16-sector PIO, LBA48, 152587MB, 312500000 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <_NEC, DVD+-RW ND-3530A, 103C> ATAPI 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801EB/ER SMBus" rev 0x02: apic 1 int
17
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR SDRAM non-parity PC2100CL2.5
spdmem1 at iic0 addr 0x52: 1GB DDR SDRAM non-parity PC2100CL2.5
usb4 at uhci0: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci1: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci2: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
umass0 at uhub1 port 4 configuration 1 interface 0 "Kingston DataTraveler 2.0"
rev 2.00/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd0 at scsibus2 targ 1 lun 0: <Kingston, DataTraveler 2.0, 1.00> SCSI2 0/direct
removable serial.09511603F9B0C5760CD0
sd0: 7634MB, 512 bytes/sector, 15636304 sectors
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on wd0a (c5a29b62671ad6b7.a) swap on wd0b dump on wd0b
