Good evening,
I cannot access hotspot with apu2b4's wle200nx wifi card.
got ath0: device timeout
I am running on OpenBSD 5.8-release with no patches applied yet.
Do I have to update with patches or does the combination of apu2b4
and Compex wle200nx not work with 5.8-release?
Below the output from POST, dmesg, ifconfig and hostname.athn0
Did not find hints on the net with this combination of hw and os.
What to do next?
Regards,
Stefan
Mainboard PCEngines apu2 Enable.
APIC: 00 missing read_resources
APIC: 01 missing read_resources
APIC: 02 missing read_resources
APIC: 03 missing read_resources
SeaBIOS (version rel-1.8.0-190-gc029eab-20151109_141843-wim-ws)
BUILD: gcc: binutils: (GNU Binutils) 2.23.2
SeaBIOS (version rel-1.8.0-190-gc029eab-20151109_141843-wim-ws)
BUILD: gcc: binutils: (GNU Binutils) 2.23.2
Found coreboot cbmem console @ dffdf000
Found mainboard PC Engines PCEngines apu2
Relocating init from 0x000eb200 to 0xdff66110 (size 32352)
Found CBFS header at 0xfffffc50
multiboot: eax=0, ebx=0
boot order:
1: /pci@i0cf8/*@11/drive@0/disk@0
2: /pci@i0cf8/usb@10/usb-*@1
3: /pci@i0cf8/usb@10/usb-*@2
4: /pci@i0cf8/usb@10/usb-*@3
5: /pci@i0cf8/usb@10/usb-*@4
6: /pci@i0cf8/*@11/drive@1/disk@0
7:
8: pxen0
9: scon1
10:
Found 23 PCI devices (max PCI bus is 04)
Copying SMBIOS entry point from 0xdffb7000 to 0x000f3040
Copying ACPI RSDP from 0xdffb8000 to 0x000f3010
Copying MPTABLE from 0xdffdc000/dffdc010 to 0x000f2e60
Copying PIR from 0xdffdd000 to 0x000f2e30
Using pmtimer, ioport 0x818
Scan for VGA option rom
Running option rom at c000:0003
Google, Inc.
Serial Graphics Adapter 08/22/15
SGABIOS $Id: sgabios.S 8 2010-04-22 00:03:40Z nlaredo $
(wiv@coreboot-Virtual-Machine) Sat Aug 22 09:25:30 UTC 2015
Term: 80x43
IO 4 0
Turning on vga text mode console
SeaBIOS (version rel-1.8.0-190-gc029eab-20151109_141843-wim-ws)
XHCI init on dev 00:10.0: regs @ 0xfeb22000, 4 ports, 32 slots, 32 byte
contexts
XHCI extcap 0x1 @ feb22500
XHCI protocol USB 3.00, 2 ports (offset 1), def 0
XHCI protocol USB 2.00, 2 ports (offset 3), def 10
XHCI extcap 0xa @ feb22540
Found 2 serial ports
ATA controller 1 at 4010/4020/0 (irq 0 dev 88)
EHCI init on dev 00:13.0 (regs=0xfeb25420)
ATA controller 2 at 4018/4024/0 (irq 0 dev 88)
Searching bootorder for: /pci@i0cf8/*@14,7
Searching bootorder for: /rom@img/memtest
Searching bootorder for: /rom@img/setup
ata0-0: SATA SSD ATA-10 Hard-Disk (15272 MiBytes)
Searching bootorder for: /pci@i0cf8/*@11/drive@0/disk@0
XHCI no devices found
Initialized USB HUB (0 ports used)
All threads complete.
Scan for option roms
PCengines Press F10 key now for boot menu:
Searching bootorder for: HALT
drive 0x000f2dc0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63
s=31277232
Space available for UMB: c1000-ef000, f0000-f2dc0
Returned 262144 bytes of ZoneHigh
e820 map has 7 items:
0: 0000000000000000 - 000000000009f800 = 1 RAM
1: 000000000009f800 - 00000000000a0000 = 2 RESERVED
2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
3: 0000000000100000 - 00000000dffae000 = 1 RAM
4: 00000000dffae000 - 00000000e0000000 = 2 RESERVED
5: 00000000f8000000 - 00000000fc000000 = 2 RESERVED
6: 0000000100000000 - 000000011f000000 = 1 RAM
enter handle_19:
NULL
Booting from Hard Disk...
Booting from 0000:7c00
Using drive 0, partition 3.
Loading.....
probing: pc0 com0 com1 mem[638K 3582M 496M a20=on]
disk: hd0+
>> OpenBSD/amd64 BOOT 3.28
switching console to com0
>> OpenBSD/amd64 BOOT 3.28
boot>
booting hd0a:/bsd:
entry point at 0x1000160 [7205c766, 34000004, 24448b12, 4060a304]
[ using 938176 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2015 OpenBSD. All rights reserved.
http://www.OpenBSD.org
OpenBSD 5.8 (GENERIC.MP) #1236: Sun Aug 16 02:31:04 MDT 2015
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4261076992 (4063MB)
avail mem = 4128043008 (3936MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdffb7020 (7 entries)
bios0: vendor coreboot version "APU2A_20150928-13-gdfdf4a2-dirty" date
11/06/2015
bios0: PC Engines apu2
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S2 S3 S4 S5
acpi0: tables DSDT FACP SSDT APIC HEST SSDT SSDT HPET
acpi0: wakeup devices PWRB(S4) PBR4(S4) PBR5(S4) PBR6(S4) PBR7(S4) PBR8(S4)
UOH1(S3) UOH3(S3) UOH5(S3) XHC0(S4)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD GX-412TC SOC, 998.25 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLU
SH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,PO
PCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,
AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,ITSC,BMI1
cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB 64b/line
16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD GX-412TC SOC, 998.13 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLU
SH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,PO
PCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,
AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,ITSC,BMI1
cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB 64b/line
16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: AMD GX-412TC SOC, 998.13 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLU
SH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,PO
PCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,
AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,ITSC,BMI1
cpu2: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB 64b/line
16-way L2 cache
cpu2: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu2: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: AMD GX-412TC SOC, 998.13 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLU
SH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,PO
PCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,
AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,ITSC,BMI1
cpu3: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB 64b/line
16-way L2 cache
cpu3: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu3: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins
ioapic1 at mainbus0: apid 5 pa 0xfec20000, version 21, 32 pins
ioapic1: misconfigured as apic 0, remapped to apid 5
acpihpet0 at acpi0: 14318180 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PBR4)
acpiprt2 at acpi0: bus 1 (PBR5)
acpiprt3 at acpi0: bus 2 (PBR6)
acpiprt4 at acpi0: bus 3 (PBR7)
acpiprt5 at acpi0: bus 4 (PBR8)
acpicpu0 at acpi0: !C2(0@400 io@0x1771), C1(@1 halt!), PSS
acpicpu1 at acpi0: !C2(0@400 io@0x1771), C1(@1 halt!), PSS
acpicpu2 at acpi0: !C2(0@400 io@0x1771), C1(@1 halt!), PSS
acpicpu3 at acpi0: !C2(0@400 io@0x1771), C1(@1 halt!), PSS
acpibtn0 at acpi0: PWRB
cpu0: 998 MHz: speeds: 1000 800 600 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 vendor "AMD", unknown product 0x1566 rev 0x00
pchb1 at pci0 dev 2 function 0 vendor "AMD", unknown product 0x156b rev 0x00
ppb0 at pci0 dev 2 function 2 "AMD AMD64 16h PCIE" rev 0x00: msi
pci1 at ppb0 bus 1
em0 at pci1 dev 0 function 0 "Intel I210" rev 0x03: msi, address <not
displayed>
ppb1 at pci0 dev 2 function 3 "AMD AMD64 16h PCIE" rev 0x00: msi
pci2 at ppb1 bus 2
em1 at pci2 dev 0 function 0 "Intel I210" rev 0x03: msi, address <not
displayed>
ppb2 at pci0 dev 2 function 4 "AMD AMD64 16h PCIE" rev 0x00: msi
pci3 at ppb2 bus 3
em2 at pci3 dev 0 function 0 "Intel I210" rev 0x03: msi, address <not
displayed>
ppb3 at pci0 dev 2 function 5 "AMD AMD64 16h PCIE" rev 0x00: msi
pci4 at ppb3 bus 4
-----> athn0 at pci4 dev 0 function 0 "Atheros AR9281" rev 0x01: apic 4 int
16
-----> athn0: AR9280 rev 2 (2T2R), ROM rev 22, address <not displayed>
vendor "AMD", unknown product 0x1537 (class crypto subclass miscellaneous,
rev 0x00) at pci0 dev 8 function 0 not configured
xhci0 at pci0 dev 16 function 0 vendor "AMD", unknown product 0x7814 rev
0x11: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 "AMD xHCI root hub" rev 3.00/1.00 addr 1
ahci0 at pci0 dev 17 function 0 "AMD Hudson-2 SATA" rev 0x40: apic 4 int 19,
AHCI 1.3
ahci0: port 0: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, SATA SSD, S9FM> SCSI3 0/direct fixed
t10.ATA_SATA_SSD_466F07550B9400388890
sd0: 15272MB, 512 bytes/sector, 31277232 sectors, thin
ehci0 at pci0 dev 19 function 0 "AMD Hudson-2 USB2" rev 0x39: apic 4 int 18
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 "AMD EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "AMD Hudson-2 SMBus" rev 0x42: SMBus
disabled
pcib0 at pci0 dev 20 function 3 "AMD Hudson-2 LPC" rev 0x11
sdhc0 at pci0 dev 20 function 7 vendor "AMD", unknown product 0x7813 rev
0x01: apic 4 int 16
sdhc0 at 0x10: can't map registers
pchb2 at pci0 dev 24 function 0 vendor "AMD", unknown product 0x1580 rev
0x00
pchb3 at pci0 dev 24 function 1 vendor "AMD", unknown product 0x1581 rev
0x00
pchb4 at pci0 dev 24 function 2 vendor "AMD", unknown product 0x1582 rev
0x00
pchb5 at pci0 dev 24 function 3 vendor "AMD", unknown product 0x1583 rev
0x00
pchb6 at pci0 dev 24 function 4 vendor "AMD", unknown product 0x1584 rev
0x00
pchb7 at pci0 dev 24 function 5 vendor "AMD", unknown product 0x1585 rev
0x00
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: NCT5104D rev 0x52
uhub2 at uhub1 port 1 "Advanced Micro Devices product 0x7900" rev 2.00/0.18
addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (7028fb81e47630db.a) swap on sd0b dump on sd0b
Automatic boot in progress: starting file system checks.
/dev/sd0a (7028fb81e47630db.a): file system is clean; not checking
/dev/sd0k (7028fb81e47630db.k): file system is clean; not checking
/dev/sd0d (7028fb81e47630db.d): file system is clean; not checking
/dev/sd0f (7028fb81e47630db.f): file system is clean; not checking
/dev/sd0g (7028fb81e47630db.g): file system is clean; not checking
/dev/sd0h (7028fb81e47630db.h): file system is clean; not checking
/dev/sd0j (7028fb81e47630db.j): file system is clean; not checking
/dev/sd0i (7028fb81e47630db.i): file system is clean; not checking
/dev/sd0e (7028fb81e47630db.e): file system is clean; not checking
setting tty flags
pf enabled
starting network
-----> athn0: no link ........... sleeping
starting early daemons: syslogd pflogd ntpd.
starting RPC daemons:.
savecore: no core dump
checking quotas: done.
clearing /tmp
kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
starting network daemons: sshd smtpd sndiod.
starting local daemons: cron.
Sun Dec 27 22:14:27 CET 2015
# ifconfig
athn0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr <not shown>
priority: 4
groups: wlan
media: IEEE802.11 autoselect (OFDM6 mode 11a)
status: no network
ieee80211: nwid <not shown> chan 9 wpakey 0x<not shown> wpaprotos
wpa2 wpaakms psk wpaciphers ccmp wpagroupcipher tkip
# cat /etc/hostname.athn0
nwid TESTNET
wpakey 'Do!Not-deal+w1th-IT'
dhcp
[demime 1.01d removed an attachment of type application/pkcs7-signature which
had a name of smime.p7s]
