When attempting to install the 2/8 snapshot on my Thinkpad x-250, I chose to configure the wireless network interface (iwm). This resulted in the following:
iwm0: could not read firmware iwm-7265-9 (error 2) panic: attempt to execute user address 0x0 in supervisor mode Problem in the iwm driver? (I got the system installed using the ethernet interface, loaded the firmware and then manually configured the iwm0 interface; the driver has been working in normal system operation without incident.) OpenBSD 5.9 (GENERIC.MP) #1870: Mon Feb 8 17:34:23 MST 2016 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 3959959552 (3776MB) avail mem = 3835748352 (3658MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xccbfd000 (65 entries) bios0: vendor LENOVO version "N10ET38W (1.17 )" date 08/20/2015 bios0: LENOVO 20CMCTO1WW acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP ASF! HPET ECDT APIC MCFG SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT PCCT SSDT TCPA SSDT UEFI MSDM BATB FPDT UEFI acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP2(S4) XHCI(S3) EHC1(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpiec0 at acpi0 acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i3-5010U CPU @ 2.10GHz, 1995.68 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX ,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEA DLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FS GSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,SENSOR,ARAT cpu0: 256KB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges cpu0: apic clock running at 99MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM) i3-5010U CPU @ 2.10GHz, 1995.39 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX ,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEA DLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FS GSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,SENSOR,ARAT cpu1: 256KB 64b/line 8-way L2 cache cpu1: smt 1, core 0, package 0 cpu2 at mainbus0: apid 2 (application processor) cpu2: Intel(R) Core(TM) i3-5010U CPU @ 2.10GHz, 1995.39 MHz cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX ,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEA DLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FS GSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,SENSOR,ARAT cpu2: 256KB 64b/line 8-way L2 cache cpu2: smt 0, core 1, package 0 cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Core(TM) i3-5010U CPU @ 2.10GHz, 1995.39 MHz cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX ,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEA DLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FS GSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,SENSOR,ARAT cpu3: 256KB 64b/line 8-way L2 cache cpu3: smt 1, core 1, package 0 ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PEG_) acpiprt2 at acpi0: bus 2 (EXP1) acpiprt3 at acpi0: bus 3 (EXP2) acpiprt4 at acpi0: bus -1 (EXP3) acpicpu0 at acpi0: C3(200@233 mwait.1@0x40), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu1 at acpi0: C3(200@233 mwait.1@0x40), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu2 at acpi0: C3(200@233 mwait.1@0x40), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu3 at acpi0: C3(200@233 mwait.1@0x40), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1 acpipwrres1 at acpi0: NVP3, resource for PEG_ acpipwrres2 at acpi0: NVP2, resource for PEG_ acpitz0 at acpi0: critical temperature is 128 degC acpibtn0 at acpi0: LID_ acpibtn1 at acpi0: SLPB acpibat0 at acpi0: BAT0 model "45N1111" serial 15023 type LiP oem "SONY" acpibat1 at acpi0: BAT1 model "45N1127" serial 3494 type LION oem "LGC" acpiac0 at acpi0: AC unit online acpithinkpad0 at acpi0 cpu0: Enhanced SpeedStep 1995 MHz: speeds: 2101, 2100, 2000, 1900, 1800, 1600, 1500, 1400, 1300, 1200, 1100, 1000, 800, 700, 600, 500 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 5G Host" rev 0x09 inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 5500" rev 0x09 drm0 at inteldrm0 inteldrm0: msi inteldrm0: 1920x1080 wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) wsdisplay0: screen 1-5 added (std, vt100 emulation) azalia0 at pci0 dev 3 function 0 "Intel Core 5G HD Audio" rev 0x09: msi xhci0 at pci0 dev 20 function 0 "Intel 9 Series xHCI" rev 0x03: msi usb0 at xhci0: USB revision 3.0 uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 "Intel 9 Series MEI" rev 0x03 at pci0 dev 22 function 0 not configured em0 at pci0 dev 25 function 0 "Intel I218-LM" rev 0x03: msi, address 68:f7:28:8d:bf:bb azalia1 at pci0 dev 27 function 0 "Intel 9 Series HD Audio" rev 0x03: msi azalia1: codecs: Realtek ALC292 audio0 at azalia1 ppb0 at pci0 dev 28 function 0 "Intel 9 Series PCIE" rev 0xe3: msi pci1 at ppb0 bus 2 rtsx0 at pci1 dev 0 function 0 "Realtek RTS5227 Card Reader" rev 0x01: msi sdmmc0 at rtsx0 ppb1 at pci0 dev 28 function 1 "Intel 9 Series PCIE" rev 0xe3: msi pci2 at ppb1 bus 3 iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 7265" rev 0x59, msi ehci0 at pci0 dev 29 function 0 "Intel 9 Series USB" rev 0x03: apic 2 int 23 usb1 at ehci0: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 pcib0 at pci0 dev 31 function 0 "Intel 9 Series LPC" rev 0x03 ahci0 at pci0 dev 31 function 2 "Intel 9 Series AHCI" rev 0x03: msi, AHCI 1.3 ahci0: port 0: 6.0Gb/s scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 0 lun 0: <ATA, ST500LM021-1KJ15, 0002> SCSI3 0/direct fixed naa.5000c5008a002fd4 sd0: 476940MB, 512 bytes/sector, 976773168 sectors ichiic0 at pci0 dev 31 function 3 "Intel 9 Series SMBus" rev 0x03: apic 2 int 18 iic0 at ichiic0 pchtemp0 at pci0 dev 31 function 6 "Intel 9 Series Thermal" rev 0x03 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) wsmouse0 at pms0 mux 0 wsmouse1 at pms0 mux 0 pms0: Synaptics clickpad, firmware 8.1 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 uhidev0 at uhub0 port 1 configuration 1 interface 0 "Logitech USB Receiver" rev 2.00/24.00 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub0 port 1 configuration 1 interface 1 "Logitech USB Receiver" rev 2.00/24.00 addr 2 uhidev1: iclass 3/1, 8 report ids ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir wsmouse2 at ums0 mux 0 uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0 uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0 uhid2 at uhidev1 reportid 8: input=1, output=0, feature=0 uhidev2 at uhub0 port 1 configuration 1 interface 2 "Logitech USB Receiver" rev 2.00/24.00 addr 2 uhidev2: iclass 3/0, 33 report ids uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0 uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0 uhid5 at uhidev2 reportid 32: input=14, output=14, feature=0 uhid6 at uhidev2 reportid 33: input=31, output=31, feature=0 ugen0 at uhub0 port 6 "Validity Sensors VFS5011 Fingerprint Reader" rev 1.10/0.78 addr 3 ugen1 at uhub0 port 7 "Intel product 0x0a2a" rev 2.01/0.01 addr 4 uvideo0 at uhub0 port 8 configuration 1 interface 0 "Chicony Electronics Co.,Ltd. Integrated Camera" rev 2.00/0.44 addr 5 video0 at uvideo0 uhub2 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.03 addr 2 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets root on sd0a (cbd008a6adc76434.a) swap on sd0b dump on sd0b WARNING: / was not properly unmounted iwm0: hw rev 0x210, fw ver 25.228 (API ver 9), address 34:02:86:6c:d4:fa syncing disks... done reboot OpenBSD 5.9 (GENERIC.MP) #1870: Mon Feb 8 17:34:23 MST 2016 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 3959959552 (3776MB) avail mem = 3835748352 (3658MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xccbfd000 (65 entries) bios0: vendor LENOVO version "N10ET38W (1.17 )" date 08/20/2015 bios0: LENOVO 20CMCTO1WW acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP ASF! HPET ECDT APIC MCFG SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT PCCT SSDT TCPA SSDT UEFI MSDM BATB FPDT UEFI acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP2(S4) XHCI(S3) EHC1(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpiec0 at acpi0 acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i3-5010U CPU @ 2.10GHz, 1995.69 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX ,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEA DLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FS GSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,SENSOR,ARAT cpu0: 256KB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges cpu0: apic clock running at 99MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM) i3-5010U CPU @ 2.10GHz, 1995.38 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX ,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEA DLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FS GSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,SENSOR,ARAT cpu1: 256KB 64b/line 8-way L2 cache cpu1: smt 1, core 0, package 0 cpu2 at mainbus0: apid 2 (application processor) cpu2: Intel(R) Core(TM) i3-5010U CPU @ 2.10GHz, 1995.38 MHz cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX ,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEA DLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FS GSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,SENSOR,ARAT cpu2: 256KB 64b/line 8-way L2 cache cpu2: smt 0, core 1, package 0 cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Core(TM) i3-5010U CPU @ 2.10GHz, 1995.38 MHz cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX ,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEA DLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FS GSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,RDSEED,ADX,SMAP,PT,SENSOR,ARAT cpu3: 256KB 64b/line 8-way L2 cache cpu3: smt 1, core 1, package 0 ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PEG_) acpiprt2 at acpi0: bus 2 (EXP1) acpiprt3 at acpi0: bus 3 (EXP2) acpiprt4 at acpi0: bus -1 (EXP3) acpicpu0 at acpi0: C3(200@233 mwait.1@0x40), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu1 at acpi0: C3(200@233 mwait.1@0x40), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu2 at acpi0: C3(200@233 mwait.1@0x40), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu3 at acpi0: C3(200@233 mwait.1@0x40), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1 acpipwrres1 at acpi0: NVP3, resource for PEG_ acpipwrres2 at acpi0: NVP2, resource for PEG_ acpitz0 at acpi0: critical temperature is 128 degC acpibtn0 at acpi0: LID_ acpibtn1 at acpi0: SLPB acpibat0 at acpi0: BAT0 model "45N1111" serial 15023 type LiP oem "SONY" acpibat1 at acpi0: BAT1 model "45N1127" serial 3494 type LION oem "LGC" acpiac0 at acpi0: AC unit online acpithinkpad0 at acpi0 cpu0: Enhanced SpeedStep 1995 MHz: speeds: 2101, 2100, 2000, 1900, 1800, 1600, 1500, 1400, 1300, 1200, 1100, 1000, 800, 700, 600, 500 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 5G Host" rev 0x09 inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 5500" rev 0x09 drm0 at inteldrm0 inteldrm0: msi inteldrm0: 1920x1080 wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) wsdisplay0: screen 1-5 added (std, vt100 emulation) azalia0 at pci0 dev 3 function 0 "Intel Core 5G HD Audio" rev 0x09: msi xhci0 at pci0 dev 20 function 0 "Intel 9 Series xHCI" rev 0x03: msi usb0 at xhci0: USB revision 3.0 uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 "Intel 9 Series MEI" rev 0x03 at pci0 dev 22 function 0 not configured em0 at pci0 dev 25 function 0 "Intel I218-LM" rev 0x03: msi, address 68:f7:28:8d:bf:bb azalia1 at pci0 dev 27 function 0 "Intel 9 Series HD Audio" rev 0x03: msi azalia1: codecs: Realtek ALC292 audio0 at azalia1 ppb0 at pci0 dev 28 function 0 "Intel 9 Series PCIE" rev 0xe3: msi pci1 at ppb0 bus 2 rtsx0 at pci1 dev 0 function 0 "Realtek RTS5227 Card Reader" rev 0x01: msi sdmmc0 at rtsx0 ppb1 at pci0 dev 28 function 1 "Intel 9 Series PCIE" rev 0xe3: msi pci2 at ppb1 bus 3 iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 7265" rev 0x59, msi ehci0 at pci0 dev 29 function 0 "Intel 9 Series USB" rev 0x03: apic 2 int 23 usb1 at ehci0: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 pcib0 at pci0 dev 31 function 0 "Intel 9 Series LPC" rev 0x03 ahci0 at pci0 dev 31 function 2 "Intel 9 Series AHCI" rev 0x03: msi, AHCI 1.3 ahci0: port 0: 6.0Gb/s scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 0 lun 0: <ATA, ST500LM021-1KJ15, 0002> SCSI3 0/direct fixed naa.5000c5008a002fd4 sd0: 476940MB, 512 bytes/sector, 976773168 sectors ichiic0 at pci0 dev 31 function 3 "Intel 9 Series SMBus" rev 0x03: apic 2 int 18 iic0 at ichiic0 pchtemp0 at pci0 dev 31 function 6 "Intel 9 Series Thermal" rev 0x03 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) wsmouse0 at pms0 mux 0 wsmouse1 at pms0 mux 0 pms0: Synaptics clickpad, firmware 8.1 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 uhidev0 at uhub0 port 1 configuration 1 interface 0 "Logitech USB Receiver" rev 2.00/24.00 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub0 port 1 configuration 1 interface 1 "Logitech USB Receiver" rev 2.00/24.00 addr 2 uhidev1: iclass 3/1, 8 report ids ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir wsmouse2 at ums0 mux 0 uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0 uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0 uhid2 at uhidev1 reportid 8: input=1, output=0, feature=0 uhidev2 at uhub0 port 1 configuration 1 interface 2 "Logitech USB Receiver" rev 2.00/24.00 addr 2 uhidev2: iclass 3/0, 33 report ids uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0 uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0 uhid5 at uhidev2 reportid 32: input=14, output=14, feature=0 uhid6 at uhidev2 reportid 33: input=31, output=31, feature=0 ugen0 at uhub0 port 6 "Validity Sensors VFS5011 Fingerprint Reader" rev 1.10/0.78 addr 3 ugen1 at uhub0 port 7 "Intel product 0x0a2a" rev 2.01/0.01 addr 4 uvideo0 at uhub0 port 8 configuration 1 interface 0 "Chicony Electronics Co.,Ltd. Integrated Camera" rev 2.00/0.44 addr 5 video0 at uvideo0 uhub2 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.03 addr 2 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets root on sd0a (cbd008a6adc76434.a) swap on sd0b dump on sd0b iwm0: hw rev 0x210, fw ver 25.228 (API ver 9), address 34:02:86:6c:d4:fa