It is quite stable also :) I love this OS... Congrats to the team for all the good work.
This router is used for etherip, and works flawlessly for more than 5 years now (and counting). # uptime 5:59PM up 1890 days, 1:02, 1 user, load averages: 0.17, 0.11, 0.09 # cat /var/run/dmesg.boot OpenBSD 4.9-stable (GENERIC.MP) #0: Wed Sep 28 10:37:22 CEST 2011 r...@rt-t-etherip1.mipih.net:/usr/src/sys/arch/i386/compile/GENERIC.MP cpu0: Intel(R) Xeon(TM) CPU 3.60GHz ("GenuineIntel" 686-class) 3.61 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,CNXT-ID,C X16,xTPR real mem = 2147000320 (2047MB) avail mem = 2101714944 (2004MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000, SMBIOS rev. 2.3 @ 0xec000 (56 entries) bios0: vendor HP version "P52" date 02/14/2006 bios0: HP ProLiant DL360 G4 acpi0 at bios0: rev 2 acpi0: sleep states S0 S4 S5 acpi0: tables DSDT FACP SPCR MCFG APIC SSDT acpi0: wakeup devices acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 200MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Xeon(TM) CPU 3.60GHz ("GenuineIntel" 686-class) 3.61 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,CNXT-ID,C X16,xTPR ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins ioapic1 at mainbus0: apid 9 pa 0xfec10000, version 20, 24 pins ioapic1: misconfigured as apic 0, remapped to apid 9 ioapic2 at mainbus0: apid 10 pa 0xfec82000, version 20, 24 pins ioapic3 at mainbus0: apid 11 pa 0xfec82400, version 20, 24 pins acpiprt0 at acpi0: bus 1 (IP2P) acpiprt1 at acpi0: bus 2 (ICHR) acpiprt2 at acpi0: bus 7 (PCXA) acpiprt3 at acpi0: bus 10 (PCXB) acpiprt4 at acpi0: bus 6 (PTB0) acpiprt5 at acpi0: bus 13 (PTA0) acpiprt6 at acpi0: bus 3 (PTC0) acpiprt7 at acpi0: bus 0 (PCI0) acpicpu0 at acpi0: FVS, 3600, 3200, 2800 MHz acpicpu1 at acpi0: FVS, 3600, 3200, 2800 MHz acpitz0 at acpi0: critical temperature 31 degC bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000! 0xcc000/0x1600 0xee000/0x2000! pci0 at mainbus0 bus 0: configuration mode 1 (bios) bridge io address conflict 0x1000/0x3000 pchb0 at pci0 dev 0 function 0 "Intel E7520 Host" rev 0x0c ppb0 at pci0 dev 2 function 0 "Intel E7520 PCIE" rev 0x0c pci1 at ppb0 bus 13 ppb1 at pci0 dev 4 function 0 "Intel E7520 PCIE" rev 0x0c pci2 at ppb1 bus 6 ppb2 at pci2 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09 pci3 at ppb2 bus 7 ppb3 at pci2 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09 pci4 at ppb3 bus 10 ppb4 at pci0 dev 6 function 0 "Intel E7520 PCIE" rev 0x0c pci5 at ppb4 bus 3 ppb5 at pci0 dev 28 function 0 "Intel 6300ESB PCIX" rev 0x02 pci6 at ppb5 bus 2 ciss0 at pci6 dev 1 function 0 "Compaq Smart Array 64xx" rev 0x01: apic 9 int 0 (irq 5) ciss0: 1 LD, HW rev 1, FW 2.80/2.80, 64bit fifo scsibus0 at ciss0: 1 targets sd0 at scsibus0 targ 0 lun 0: <HP, LOGICAL VOLUME, 2.80> SCSI2 0/direct fixed sd0: 34727MB, 512 bytes/sec, 71122560 sec total bge0 at pci6 dev 2 function 0 "Broadcom BCM5704C" rev 0x10, BCM5704 B0 (0x2100): apic 9 int 1 (irq 5), address 00:15:60:ac:ea:1e brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0 bge1 at pci6 dev 2 function 1 "Broadcom BCM5704C" rev 0x10, BCM5704 B0 (0x2100): apic 9 int 2 (irq 5), address 00:15:60:ac:ea:1d brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0 uhci0 at pci0 dev 29 function 0 "Intel 6300ESB USB" rev 0x02: apic 8 int 16 (irq 5) uhci1 at pci0 dev 29 function 1 "Intel 6300ESB USB" rev 0x02: apic 8 int 19 (irq 5) "Intel 6300ESB WDT" rev 0x02 at pci0 dev 29 function 4 not configured "Intel 6300ESB APIC" rev 0x02 at pci0 dev 29 function 5 not configured ehci0 at pci0 dev 29 function 7 "Intel 6300ESB USB" rev 0x02: apic 8 int 23 (irq 5) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb6 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x0a pci7 at ppb6 bus 1 vga1 at pci7 dev 3 function 0 "ATI Rage XL" rev 0x27 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) "Compaq iLO" rev 0x01 at pci7 dev 4 function 0 not configured "Compaq iLO" rev 0x01 at pci7 dev 4 function 2 not configured ichpcib0 at pci0 dev 31 function 0 "Intel 6300ESB LPC" rev 0x02 pciide0 at pci0 dev 31 function 1 "Intel 6300ESB IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus1 at atapiscsi0: 2 targets cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, CD-ROM GCR-8240N, 2.03> ATAPI 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, DMA mode 2 pciide0: channel 1 disabled (no drives) usb1 at uhci0: USB revision 1.0 uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at ichpcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo com1: probed fifo depth: 0 bytes pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec mtrr: Pentium Pro MTRR support vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root root on sd0a swap on sd0b dump on sd0b -- Cordialement, Pierre BARDOU -----Message d'origine----- De : KAWAMATA Yoshihiro [mailto:k...@on.rim.or.jp] Envoyé : mercredi 30 novembre 2016 02:33 À : misc@openbsd.org Cc : dm...@openbsd.org; skin...@britvault.co.uk Objet : Re: 350MHz IBM Intel Pentium II runs 5.9 fine From: skin...@britvault.co.uk (Craig Skinner) Subject: 350MHz IBM Intel Pentium II runs 5.9 fine Date: Tue, 29 Nov 2016 14:12:22 +0000 > Runs fine for me 24*7, for about 15 years. OpenBSD is SUPERB! > > 5.7 dumped & 5.9 installed on 22nd October: Running about 24 * 365 * 15 is great! I also have an old IBM box. Aptiva 550 running OpenBSD 6.0 - 4 IDE HDDs, 2 ISA NICs, 4 serial ports. - Kernel was recompiled for very small memory. - Serial console, no VGA driver - Good enough for a NTP server on our LAN. OpenBSD 6.0-stable (HSV_LITE_NV) #2: Sat Nov 5 10:38:12 JST 2016 root@nimbus10.localnet:/opt/usr/src/sys/arch/i386/compile/HSV_LITE_NV cpu0: Intel 486DX4 ("GenuineIntel" 486-class) cpu0: FPU,V86 real mem = 24702976 (23MB) avail mem = 20316160 (19MB) mainbus0 at root bios0 at mainbus0: date 04/12/95 bios0: ROM list: 0xc0000/0x8000 cpu0 at mainbus0: (uniprocessor) isa0 at mainbus0 isadma0 at isa0 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com0: console com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo com2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo com3 at isa0 port 0x2e8/8 irq 9: ns16550a, 16 byte fifo wdc0 at isa0 port 0x1f0/8 irq 14 wd0 at wdc0 channel 0 drive 0: <Conner Peripherals 425MB - CFS425A> wd0: 16-sector PIO, CHS, 406MB, 839 cyl, 16 head, 62 sec, 832288 sectors wd1 at wdc0 channel 0 drive 1: <WDC AC2700F> wd1: 16-sector PIO, LBA, 696MB, 1427328 sectors wd0(wdc0:0:0): using BIOS timings wd1(wdc0:0:1): using BIOS timings wdc1 at isa0 port 0x170/8 irq 15 wd2 at wdc1 channel 0 drive 0: <QUANTUM FIREBALL1280A> wd2: 8-sector PIO, LBA, 1222MB, 2503872 sectors wd3 at wdc1 channel 0 drive 1: <QUANTUM TRB850A> wd3: 8-sector PIO, LBA, 810MB, 1660176 sectors wd2(wdc1:0:0): using BIOS timings wd3(wdc1:0:1): using BIOS timings ne0 at isa0 port 0x240/32 irq 11, NE2000 (RTL8019), address 00:20:18:63:a9:6f ne1 at isa0 port 0x300/32 irq 10, NE2000, address 00:00:01:13:08:80 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 softraid0 at root scsibus0 at softraid0: 256 targets root on wd0a swap on wd0b dump on wd0b