2016-12-17 4:59 GMT+01:00 Nick Holland <n...@holland-consulting.net>:
>
> heh. Little secret: if you look in many data centers, you will find
> lots of 1U boxes with various titles -- security appliances, load
> balancing devices, etc. A lot of them, under the covers, are just PCs.
> And a lot of data centers have 'em rotting on the racks after they have
> been turned off and replaced, but no motivation to remove them.
My current home firewall is running 6.0 on a Cisco ACE4710 hw. Pentium
4 3.4Ghz w/ 6GB ram. It has an internal hard drive in addition to the
CF but was unplugged to suck less power. It had a cavium nic which was
replaced by an intel four-port gig. I previously used a Netasq F200
and a Nokia IP710 firewalls. The F200 was slow, and the IP710 used way
too much power, but each time it worked, either from a cf card or a
hard drive.
Dmesg from the ace 4710:
OpenBSD 6.0 (GENERIC) #2148: Tue Jul 26 12:55:20 MDT 2016
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 6425608192 (6127MB)
avail mem = 6226448384 (5938MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xfb2d0 (37 entries)
bios0: vendor American Megatrends Inc. version "S27S1A05" date 03/19/2008
bios0: Quanta Computer Inc. S27S
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S4 S5
acpi0: tables DSDT FACP APIC MCFG OEMB
acpi0: wakeup devices P0P2(S4) P0P3(S4) P0P1(S4) PS2K(S1) PS2M(S1)
USB0(S4) USB1(S4) USB2(S4) USB3(S4) EUSB(S4) MC97(S4) P0P4(S4)
P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Pentium(R) 4 CPU 3.40GHz, 3400.54 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,CNXT-ID,CX16,xTPR,PDCM,NXE,LONG,LAHF
cpu0: 2MB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 200MHz
cpu0: mwait min=64, max=64
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P1)
acpiprt2 at acpi0: bus 4 (P0P4)
acpiprt3 at acpi0: bus 5 (PXHA)
acpiprt4 at acpi0: bus 3 (P0P8)
acpiprt5 at acpi0: bus 2 (P0P9)
acpicpu0 at acpi0: C1(@1 halt!)
"PNP0501" at acpi0 not configured
acpibtn0 at acpi0: PWRB
ipmi at mainbus0 not configured
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel E7230 Host" rev 0xc0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: msi
pci1 at ppb0 bus 4
ppb1 at pci1 dev 0 function 0 "Intel 6702PXH PCIE-PCIX" rev 0x09
pci2 at ppb1 bus 5
ppb2 at pci2 dev 2 function 0 "Pericom PI7C21P100 PCIX-PCIX" rev 0x01
pci3 at ppb2 bus 6
em0 at pci3 dev 4 function 0 "Intel 82546GB" rev 0x03: apic 2 int 19,
address 00:1b:21:1a:e9:c0
em1 at pci3 dev 4 function 1 "Intel 82546GB" rev 0x03: apic 2 int 18,
address 00:1b:21:1a:e9:c1
em2 at pci3 dev 6 function 0 "Intel 82546GB" rev 0x03: apic 2 int 17,
address 00:1b:21:1a:e9:c2
em3 at pci3 dev 6 function 1 "Intel 82546GB" rev 0x03: apic 2 int 16,
address 00:1b:21:1a:e9:c3
ppb3 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01: msi
pci4 at ppb3 bus 3
bge0 at pci4 dev 0 function 0 "Broadcom BCM5721" rev 0x21, BCM5750 C1
(0x4201): msi, address 00:23:8b:8a:5d:59
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb4 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01
pci5 at ppb4 bus 2
bge1 at pci5 dev 0 function 0 "Broadcom BCM5721" rev 0x21, BCM5750 C1
(0x4201): msi, address 00:23:8b:8a:5d:58
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 2 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1
pci6 at ppb5 bus 1
vga1 at pci6 dev 5 function 0 "XGI Technology Volari Z7" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 1: <SMART CF>
wd0: 2-sector PIO, LBA, 3907MB, 8003520 sectors
wd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 2 int 19 for native-PCI interrupt
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 2 int 19
iic0 at ichiic0
adt0 at iic0 addr 0x2e: lm96000 rev 0x68
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM ECC PC2-5300CL5
spdmem1 at iic0 addr 0x51: 2GB DDR2 SDRAM ECC PC2-5300CL5
spdmem2 at iic0 addr 0x52: 1GB DDR2 SDRAM ECC PC2-5300CL5
spdmem3 at iic0 addr 0x53: 2GB DDR2 SDRAM ECC PC2-5300CL5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (f2b1c8c26785e724.a) swap on wd0b dump on wd0b
