On Wed, Dec 27, 2017 at 02:29:09PM -0800, Jordan Geoghegan wrote:
> I tried installing again and followed your instructions to a T and the
> installer hung after typing reboot at the prompt upon finishing install.
>
> I let it sit for 10-15 minutes after entering reboot command but then
> determined it had likely frozen considering it said the disks had been
> synced and the softraid volume reported being detached. I power cycled the
> device and was met with this upon reboot after following boot_sparc64(8)
> instructions:
>
> Boot device: disk0 File and args: sr0a:/bsd
> OpenBSD IEEE 1275 Bootblock 1.4
> > > OpenBSD BOOT 1.9
> ERROR: /iscsi-hba: No iscsi-network-bootpath property
> Unknown device: sr0
> Cannot boot from softraid: Unknown error: code 19
> Program terminated
> {0} ok
>
> So I rebooted and and tried once again with fresh disks while I recorded the
> console output to see if anyone can spot me doing something wrong here, or
> if this is indeed some sort of bug.
>
> The installer didn't freeze the second time around, but I ultimately met the
> same result:
>
> Cannot boot from softraid: Unknown error: code 19
>
> Any ideas?
>
>
> T4-1 output:
>
>
>
>
> NOTICE: Entering OpenBoot.
> NOTICE: Fetching Guest MD from HV.
> NOTICE: Starting additional cpus.
> NOTICE: Initializing LDC services.
> NOTICE: Probing PCI devices.
> NOTICE: Finished PCI probing.
>
> SPARC T4-1, No Keyboard
> Copyright (c) 1998, 2016, Oracle and/or its affiliates. All rights reserved.
> OpenBoot 4.38.5, 127.5000 GB memory available, Serial #104767966.
> Ethernet address 0:10:e0:3e:a1:de, Host ID: 863ea1de.
>
>
>
> Can't open disk label package
> Evaluating:
> No viable default device found in boot-device variable.
>
> {0} ok boot disk3:c bsd
> Boot device: /pci@400/pci@1/pci@0/pci@4/scsi@0/disk@p3:c File and args: bsd
> OpenBSD IEEE 1275 Bootblock 1.4
> ..>> OpenBSD BOOT 1.9
> |#/#-#open
> /pci@400/pci@1/pci@0/pci@4/scsi@0/disk@w5001b448b4351630,0:c/etc/random.seed:
> No such file or directory
> \#|#/#-#\#Booting
> /pci@400/pci@1/pci@0/pci@4/scsi@0/disk@w5001b448b4351630,0:c/bsd
> 4087984@0x1000000|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|
> #/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|
> #/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|
> #/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#
> |#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#+8016@0x13e60b0/#+3260440@0x1c00000-#
> \#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-
> #\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-
> #\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-
> #\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\
> #|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#
> /#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/
> #-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#+933864@0x1f1c018\#
> #/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#
>
> console is /virtual-devices@100/console@1
>
> Copyright (c) 1982, 1986, 1989, 1991, 1993
>
> The Regents of the University of California. All rights reserved.
>
> Copyright (c) 1995-2017 OpenBSD. All rights reserved. https://www.OpenBSD.org
>
>
> OpenBSD 6.2 (RAMDISK) #282: Tue Oct 3 23:21:19 MDT 2017
>
> dera...@sparc64.openbsd.org:/usr/src/sys/arch/sparc64/compile/RAMDISK
>
> real mem = 136902082560 (130560MB)
>
> avail mem = 134512214016 (128280MB)
>
> mainbus0 at root: SPARC T4-1
>
> cpu0 at mainbus0: SPARC-T4 (rev 0.0) @ 2847.862 MHz
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "SPARC-T4" at mainbus0 not configured
>
> "reboot-memory" at mainbus0 not configured
>
> vbus0 at mainbus0
>
> "flashprom" at vbus0 not configured
>
> "tpm" at vbus0 not configured
>
> cbus0 at vbus0
>
> "virtual-channel" at cbus0 not configured
>
> "virtual-channel-client" at cbus0 not configured
>
> "virtual-channel-client" at cbus0 not configured
>
> "virtual-channel" at cbus0 not configured
>
> "virtual-domain-service" at cbus0 not configured
>
> vrng0 at vbus0
>
> vcons0 at vbus0: ivec 0x111, console
>
> vrtc0 at vbus0
>
> vpci0 at mainbus0: bus 0 to 18, dvma map 80000000-ffffffff
>
> pci0 at vpci0
>
> ppb0 at pci0 dev 1 function 0 "Sun SPARC PCIE" rev 0x01
>
> pci1 at ppb0 bus 1
>
> ppb1 at pci1 dev 0 function 0 vendor "IDT", unknown product 0x807a rev 0x02
>
> pci2 at ppb1 bus 2
>
> ppb2 at pci2 dev 0 function 0 vendor "IDT", unknown product 0x807a rev 0x02:
> msi
>
> pci3 at ppb2 bus 3
>
> ppb3 at pci2 dev 4 function 0 vendor "IDT", unknown product 0x807a rev 0x02
>
> pci4 at ppb3 bus 4
>
> mpii0 at pci4 dev 0 function 0 "Symbios Logic SAS2008" rev 0x03: msi
>
> mpii0: RF On-Board, firmware 9.5.0.0 IR, MPI 2.0
>
> scsibus0 at mpii0: 834 targets
>
> ppb4 at pci2 dev 6 function 0 vendor "IDT", unknown product 0x807a rev 0x02:
> msi
>
> pci5 at ppb4 bus 5
>
> ppb5 at pci2 dev 8 function 0 vendor "IDT", unknown product 0x807a rev 0x02:
> msi
>
> pci6 at ppb5 bus 6
>
> ppb6 at pci0 dev 2 function 0 "Sun SPARC PCIE" rev 0x01
>
> pci7 at ppb6 bus 7
>
> ppb7 at pci7 dev 0 function 0 vendor "IDT", unknown product 0x8077 rev 0x02
>
> pci8 at ppb7 bus 8
>
> ppb8 at pci8 dev 0 function 0 vendor "IDT", unknown product 0x8077 rev 0x02
>
> pci9 at ppb8 bus 9
>
> ppb9 at pci9 dev 0 function 0 "ASPEED Technology AST1150 PCI" rev 0x02
>
> pci10 at ppb9 bus 10
>
> "ASPEED Technology AST2000" rev 0x10 at pci10 dev 0 function 0 not configured
>
> ppb10 at pci8 dev 4 function 0 vendor "IDT", unknown product 0x8077 rev 0x02
>
> pci11 at ppb10 bus 11
>
> mpii1 at pci11 dev 0 function 0 "Symbios Logic SAS2008" rev 0x03: msi
>
> mpii1: RF On-Board, firmware 9.5.0.0 IR, MPI 2.0
>
> scsibus1 at mpii1: 834 targets
>
> ppb11 at pci8 dev 6 function 0 vendor "IDT", unknown product 0x8077 rev 0x02
>
> pci12 at ppb11 bus 12
>
> em0 at pci12 dev 0 function 0 "Intel 82576" rev 0x01: msi, address
> 00:10:e0:3e:a1:de
>
> em1 at pci12 dev 0 function 1 "Intel 82576" rev 0x01: msi, address
> 00:10:e0:3e:a1:df
>
> ppb12 at pci8 dev 7 function 0 vendor "IDT", unknown product 0x8077 rev 0x02
>
> pci13 at ppb12 bus 13
>
> em2 at pci13 dev 0 function 0 "Intel 82576" rev 0x01: msi, address
> 00:10:e0:3e:a1:e0
>
> em3 at pci13 dev 0 function 1 "Intel 82576" rev 0x01: msi, address
> 00:10:e0:3e:a1:e1
>
> ppb13 at pci8 dev 8 function 0 vendor "IDT", unknown product 0x8077 rev 0x02:
> msi
>
> pci14 at ppb13 bus 14
>
> ppb14 at pci8 dev 10 function 0 vendor "IDT", unknown product 0x8077 rev
> 0x02: msi
>
> pci15 at ppb14 bus 15
>
> ppb15 at pci8 dev 12 function 0 vendor "IDT", unknown product 0x8077 rev
> 0x02: msi
>
> pci16 at ppb15 bus 16
>
> ppb16 at pci8 dev 15 function 0 vendor "IDT", unknown product 0x8077 rev 0x02
>
> pci17 at ppb16 bus 17
>
> ppb17 at pci17 dev 0 function 0 "PLX PEX 8112" rev 0xaa
>
> pci18 at ppb17 bus 18
>
> ohci0 at pci18 dev 0 function 0 "NEC USB" rev 0x43: ivec 0x402, version 1.0
>
> ohci1 at pci18 dev 0 function 1 "NEC USB" rev 0x43: ivec 0x403, version 1.0
>
> ehci0 at pci18 dev 0 function 2 "NEC USB" rev 0x04: ivec 0x404
>
> usb0 at ehci0: USB revision 2.0
>
> uhub0 at usb0 configuration 1 interface 0 "NEC EHCI root hub" rev 2.00/1.00
> addr 1
>
> usb1 at ohci0: USB revision 1.0
>
> uhub1 at usb1 configuration 1 interface 0 "NEC OHCI root hub" rev 1.00/1.00
> addr 1
>
> usb2 at ohci1: USB revision 1.0
>
> uhub2 at usb2 configuration 1 interface 0 "NEC OHCI root hub" rev 1.00/1.00
> addr 1
>
> "niu" at mainbus0 not configured
>
> "pci-performance-counters" at mainbus0 not configured
>
> cd0 at scsibus1 targ 8 lun 0: <TEAC, DV-W28SS-W, 1.0A> ATAPI 5/cdrom removable
>
> sd0 at scsibus0 targ 2 lun 0: <HP, EG0300FAWHV, HPDD> SCSI3 0/direct fixed
> naa.5000c5001b1e4cd3
>
> sd0: 286102MB, 512 bytes/sector, 585937500 sectors
>
> sd1 at scsibus0 targ 5 lun 0: <ATA, SanDisk SDSSDA24, 30RL> SCSI3 0/direct
> fixed naa.5001b448b4351630
>
> sd1: 228936MB, 512 bytes/sector, 468862128 sectors
>
> sd2 at scsibus0 targ 3 lun 0: <HP, EG0300FAWHV, HPDD> SCSI3 0/direct fixed
> naa.5000c50029674d0f
>
> sd2: 286102MB, 512 bytes/sector, 585937500 sectors
>
> uhub3 at uhub0 port 2 configuration 1 interface 0 "vendor 0x04b4 product
> 0x6560" rev 2.00/0.0b addr 2
>
> uhub4 at uhub3 port 3 configuration 1 interface 0 "American Megatrends Inc.
> Generic Hub" rev 2.00/1.00 addr 3
>
> umass0 at uhub4 port 2 configuration 1 interface 0 "American Megatrends Inc.
> Virtual Cdrom Device" rev 2.00/1.00 addr 4
>
> umass0: using SCSI over Bulk-Only
>
> scsibus2 at umass0: 2 targets, initiator 0
>
> cd1 at scsibus2 targ 1 lun 0: <AMI, Virtual CDROM, 1.00> SCSI0 5/cdrom
> removable
>
> cdce0 at uhub4 port 3 configuration 2 interface 0 "SunMicro Virtual Eth
> Device" rev 2.00/1.00 addr 5
>
> cdce0: address 02:21:28:57:47:17
>
> uhidev0 at uhub3 port 4 configuration 1 interface 0 "American Megatrends Inc.
> Virtual Keyboard and Mouse" rev 1.10/1.00 addr 6
>
> uhidev0: iclass 3/1
>
> ukbd0 at uhidev0
>
> wskbd0 at ukbd0
>
> uhidev1 at uhub3 port 4 configuration 1 interface 1 "American Megatrends Inc.
> Virtual Keyboard and Mouse" rev 1.10/1.00 addr 6
>
> uhidev1: iclass 3/1
>
> uhid at uhidev1 not configured
>
> uhub5 at uhub0 port 4 configuration 1 interface 0 "vendor 0x04b4 product
> 0x6560" rev 2.00/0.0b addr 7
>
> softraid0 at root
>
> scsibus3 at softraid0: 256 targets
>
> bootpath:
> /pci@400,0/pci@1,0/pci@0,0/pci@4,0/scsi@0,0/disk@5001b448b4351630,0:c
>
> root on rd0a swap on rd0b dump on rd0b
>
> erase ^?, werase ^W, kill ^U, intr ^C, status ^T
>
> Welcome to the OpenBSD/sparc64 6.2 installation program.
> (I)nstall, (U)pgrade, (A)utoinstall or (S)hell? s
> # cd /dev
>
> # sh MAKEDEV sd1 sd2 sd3 sd4
Did you:
fdisk -iy sd0
fdisk -iy sd1 (or whatever the appropriate disk is)
the error code 19 is ENODEV so I'm guessing if you didn't then there is
no mbr and without it the bootcode may not be able to find the device.
Of course I'm no expert and its mainly just a guess.
>
> # disklabel sd1
>
> # /dev/rsd1c:
> type: SCSI
> disk: SCSI disk
> label:
> duid: d2b2a5bbe2d92f1e
> flags: vendor
> bytes/sector: 512
> sectors/track: 32
> tracks/cylinder: 1
> sectors/cylinder: 32
> cylinders: 180
> total sectors: 468862128
> boundstart: 0
> boundend: 468862128
> drivedata: 0
>
> 16 partitions:
> # size offset fstype [fsize bsize cpg]
> a: 5760 0 4.2BSD 4096 8192 128
> c: 468862128 0 unused
> #
> # disklabel sd0
>
> # /dev/rsd0c:
> type: SCSI
> disk: SCSI disk
> label: EG0300FAWHV
> duid: 0000000000000000
> flags: vendor
> bytes/sector: 512
> sectors/track: 1284
> tracks/cylinder: 4
> sectors/cylinder: 5136
> cylinders: 114029
> total sectors: 585937500
> boundstart: 0
> boundend: 585937500
> drivedata: 0
>
> 16 partitions:
> # size offset fstype [fsize bsize cpg]
> c: 585937500 0 unused
> #
> # disklabel sd2
>
> # /dev/rsd2c:
> type: SCSI
> disk: SCSI disk
> label: EG0300FAWHV
> duid: 0000000000000000
> flags: vendor
> bytes/sector: 512
> sectors/track: 1284
> tracks/cylinder: 4
> sectors/cylinder: 5136
> cylinders: 114029
> total sectors: 585937500
> boundstart: 0
> boundend: 585937500
> drivedata: 0
>
> 16 partitions:
> # size offset fstype [fsize bsize cpg]
> c: 585937500 0 unused
> # disklabel -E sd0
>
> This platform requires that partition offsets/sizes be on cylinder boundaries.
> Partition offsets/sizes will be rounded to the nearest cylinder automatically.
> Label editor (enter '?' for help at any prompt)
> > a a
> offset: [0]
> size: [585937500] *
> Rounding size to cylinder (5136 sectors): 585935424
> FS type: [4.2BSD] RAID
> > w
> > q
> No label changes.
> # disklabel sd0 > layout
>
> # disklabel -R sd2 layout
>
> # rm layout
>
> # bioctl -c 1 -l sd0a,sd2a softraid0
>
> sd3 at scsibus3 targ 1 lun 0: <OPENBSD, SR RAID 1, 006> SCSI2 0/direct fixed
>
> sd3: 286101MB, 512 bytes/sector, 585934896 sectors
>
> softraid0: RAID 1 volume attached as sd3
> # dd if=/dev/zero of=/dev/rsd3c bs=1m count=1
>
> 1+0 records in
> 1+0 records out
> 1048576 bytes transferred in 0.104 secs (10063131 bytes/sec)
> # bioctl sd3
>
> Volume Status Size Device
> softraid0 0 Online 299998666752 sd3 RAID1
> 0 Online 299998666752 0:0.0 noencl <sd0a>
> 1 Online 299998666752 0:1.0 noencl <sd2a>
> # install
>
> At any prompt except password prompts you can escape to a shell by
> typing '!'. Default answers are shown in []'s and are selected by
> pressing RETURN. You can exit this program at any time by pressing
> Control-C, but this can leave your system in an inconsistent state.
>
> System hostname? (short form, e.g. 'foo') NAS
>
> Available network interfaces are: em0 em1 em2 em3 cdce0 vlan0.
> Which network interface do you wish to configure? (or 'done') [em0]
> IPv4 address for em0? (or 'dhcp' or 'none') [dhcp]
> em0: DHCPDISCOVER - interval 1
> em0: DHCPOFFER from 172.17.2.1 (a0:36:9f:a1:0d:e7)
> em0: DHCPREQUEST to 255.255.255.255
> em0: DHCPACK from 172.17.2.1 (a0:36:9f:a1:0d:e7)
> em0: bound to 172.17.2.23 -- renewal in 21600 seconds
> IPv6 address for em0? (or 'autoconf' or 'none') [none]
> Available network interfaces are: em0 em1 em2 em3 cdce0 vlan0.
> Which network interface do you wish to configure? (or 'done') [done]
> Default IPv4 route? (IPv4 address or none) [172.17.2.1]
> add net default: gateway 172.17.2.1
> DNS domain name? (e.g. 'example.com') [my.domain]
> Using DNS nameservers at 192.168.1.1
>
> Password for root account? (will not echo)
> Password for root account? (again)
> Start sshd(8) by default? [yes]
> Setup a user? (enter a lower-case loginname, or 'no') [no] bsduser
> Full name for user bsduser? [bsduser]
> Password for user bsduser? (will not echo)
> Password for user bsduser? (again)
> WARNING: root is targeted by password guessing attacks, pubkeys are safer.
> Allow root ssh login? (yes, no, prohibit-password) [no] yes
> What timezone are you in? ('?' for list) [Canada/Pacific]
>
> Available disks are: sd0 sd1 sd2 sd3.
> Which disk is the root disk? ('?' for details) [sd0] sd3
> The auto-allocated layout for sd3 is:
> # size offset fstype [fsize bsize cpg]
> a: 1.0G 0 4.2BSD 2048 16384 1 # /
> b: 27.2G 2104515 swap
> c: 279.4G 0 unused
> d: 4.0G 59199525 4.2BSD 2048 16384 1 # /tmp
> e: 35.4G 67601520 4.2BSD 2048 16384 1 # /var
> f: 2.0G 141773625 4.2BSD 2048 16384 1 # /usr
> g: 1.0G 145982655 4.2BSD 2048 16384 1 # /usr/X11R6
> h: 10.0G 148087170 4.2BSD 2048 16384 1 # /usr/local
> i: 2.0G 169068060 4.2BSD 2048 16384 1 # /usr/src
> j: 6.0G 173277090 4.2BSD 2048 16384 1 # /usr/obj
> k: 190.8G 185872050 4.2BSD 4096 32768 1 # /home
> Use (A)uto layout, (E)dit auto layout, or create (C)ustom layout? [a] e
> This platform requires that partition offsets/sizes be on cylinder boundaries.
> Partition offsets/sizes will be rounded to the nearest cylinder automatically.
> Label editor (enter '?' for help at any prompt)
> > p g
> OpenBSD area: 0-585934896; size: 279.4G; free: 0.0G
> # size offset fstype [fsize bsize cpg]
> a: 1.0G 0 4.2BSD 2048 16384 1 # /
> b: 27.2G 2104515 swap
> c: 279.4G 0 unused
> d: 4.0G 59199525 4.2BSD 2048 16384 1 # /tmp
> e: 35.4G 67601520 4.2BSD 2048 16384 1 # /var
> f: 2.0G 141773625 4.2BSD 2048 16384 1 # /usr
> g: 1.0G 145982655 4.2BSD 2048 16384 1 # /usr/X11R6
> h: 10.0G 148087170 4.2BSD 2048 16384 1 # /usr/local
> i: 2.0G 169068060 4.2BSD 2048 16384 1 # /usr/src
> j: 6.0G 173277090 4.2BSD 2048 16384 1 # /usr/obj
> k: 190.8G 185872050 4.2BSD 4096 32768 1 # /home
> > R b
> [+|-]new size (with unit): [57095010] 8g
> > p g
> OpenBSD area: 0-585934896; size: 279.4G; free: 19.2G
> # size offset fstype [fsize bsize cpg]
> a: 1.0G 0 4.2BSD 2048 16384 1 # /
> b: 8.0G 2104515 swap
> c: 279.4G 0 unused
> d: 4.0G 18892440 4.2BSD 2048 16384 1 # /tmp
> e: 35.4G 27294435 4.2BSD 2048 16384 1 # /var
> f: 2.0G 101466540 4.2BSD 2048 16384 1 # /usr
> g: 1.0G 105675570 4.2BSD 2048 16384 1 # /usr/X11R6
> h: 10.0G 107780085 4.2BSD 2048 16384 1 # /usr/local
> i: 2.0G 128760975 4.2BSD 2048 16384 1 # /usr/src
> j: 6.0G 132970005 4.2BSD 2048 16384 1 # /usr/obj
> k: 190.8G 145564965 4.2BSD 4096 32768 1 # /home
> > R f
> [+|-]new size (with unit): [4209030] 10g
> > p g
> OpenBSD area: 0-585934896; size: 279.4G; free: 11.2G
> # size offset fstype [fsize bsize cpg]
> a: 1.0G 0 4.2BSD 2048 16384 1 # /
> b: 8.0G 2104515 swap
> c: 279.4G 0 unused
> d: 4.0G 18892440 4.2BSD 2048 16384 1 # /tmp
> e: 35.4G 27294435 4.2BSD 2048 16384 1 # /var
> f: 10.0G 101466540 4.2BSD 2048 16384 1 # /usr
> g: 1.0G 122447430 4.2BSD 2048 16384 1 # /usr/X11R6
> h: 10.0G 124551945 4.2BSD 2048 16384 1 # /usr/local
> i: 2.0G 145532835 4.2BSD 2048 16384 1 # /usr/src
> j: 6.0G 149741865 4.2BSD 2048 16384 1 # /usr/obj
> k: 190.8G 162336825 4.2BSD 4096 32768 1 # /home
> > R i
> [+|-]new size (with unit): [4209030] 4g
> > p g
> OpenBSD area: 0-585934896; size: 279.4G; free: 9.2G
> # size offset fstype [fsize bsize cpg]
> a: 1.0G 0 4.2BSD 2048 16384 1 # /
> b: 8.0G 2104515 swap
> c: 279.4G 0 unused
> d: 4.0G 18892440 4.2BSD 2048 16384 1 # /tmp
> e: 35.4G 27294435 4.2BSD 2048 16384 1 # /var
> f: 10.0G 101466540 4.2BSD 2048 16384 1 # /usr
> g: 1.0G 122447430 4.2BSD 2048 16384 1 # /usr/X11R6
> h: 10.0G 124551945 4.2BSD 2048 16384 1 # /usr/local
> i: 4.0G 145532835 4.2BSD 2048 16384 1 # /usr/src
> j: 6.0G 153934830 4.2BSD 2048 16384 1 # /usr/obj
> k: 190.8G 166529790 4.2BSD 4096 32768 1 # /home
> > R k
> [+|-]new size (with unit): [400050630] 200g
> Amount too big
> > 199# ## ## #R e
> [+|-]new size (with unit): [74172105] 35g
> > R k
> [+|-]new size (with unit): [400050630] 200g
> > p g
> OpenBSD area: 0-585934896; size: 279.4G; free: 0.4G
> # size offset fstype [fsize bsize cpg]
> a: 1.0G 0 4.2BSD 2048 16384 1 # /
> b: 8.0G 2104515 swap
> c: 279.4G 0 unused
> d: 4.0G 18892440 4.2BSD 2048 16384 1 # /tmp
> e: 35.0G 27294435 4.2BSD 2048 16384 1 # /var
> f: 10.0G 100695420 4.2BSD 2048 16384 1 # /usr
> g: 1.0G 121676310 4.2BSD 2048 16384 1 # /usr/X11R6
> h: 10.0G 123780825 4.2BSD 2048 16384 1 # /usr/local
> i: 4.0G 144761715 4.2BSD 2048 16384 1 # /usr/src
> j: 6.0G 153163710 4.2BSD 2048 16384 1 # /usr/obj
> k: 200.0G 165758670 4.2BSD 4096 32768 1 # /home
> > w
> > q
> No label changes.
> /dev/rsd3a: 1027.6MB in 2104512 sectors of 512 bytes
> 6 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
> /dev/rsd3k: 204805.2MB in 419441080 sectors of 512 bytes
> 252 cylinder groups of 814.44MB, 26062 blocks, 52224 inodes each
> /dev/rsd3d: 4102.5MB in 8401992 sectors of 512 bytes
> 21 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
> /dev/rsd3f: 10244.6MB in 20980888 sectors of 512 bytes
> 51 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
> /dev/rsd3g: 1027.6MB in 2104512 sectors of 512 bytes
> 6 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
> /dev/rsd3h: 10244.6MB in 20980888 sectors of 512 bytes
> 51 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
> /dev/rsd3j: 6149.9MB in 12594960 sectors of 512 bytes
> 31 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
> /dev/rsd3i: 4102.5MB in 8401992 sectors of 512 bytes
> 21 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
> /dev/rsd3e: 35840.3MB in 73400984 sectors of 512 bytes
> 178 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
> Available disks are: sd0 sd1 sd2.
> Which disk do you wish to initialize? (or 'done') [done]
> /dev/sd3a (8db1efc313479eda.a) on /mnt type ffs (rw, asynchronous, local)
> /dev/sd3k (8db1efc313479eda.k) on /mnt/home type ffs (rw, asynchronous,
> local, nodev, nosuid)
> /dev/sd3d (8db1efc313479eda.d) on /mnt/tmp type ffs (rw, asynchronous, local,
> nodev, nosuid)
> /dev/sd3f (8db1efc313479eda.f) on /mnt/usr type ffs (rw, asynchronous, local,
> nodev)
> /dev/sd3g (8db1efc313479eda.g) on /mnt/usr/X11R6 type ffs (rw, asynchronous,
> local, nodev)
> /dev/sd3h (8db1efc313479eda.h) on /mnt/usr/local type ffs (rw, asynchronous,
> local, nodev)
> /dev/sd3j (8db1efc313479eda.j) on /mnt/usr/obj type ffs (rw, asynchronous,
> local, nodev, nosuid)
> /dev/sd3i (8db1efc313479eda.i) on /mnt/usr/src type ffs (rw, asynchronous,
> local, nodev, nosuid)
> /dev/sd3e (8db1efc313479eda.e) on /mnt/var type ffs (rw, asynchronous, local,
> nodev, nosuid)
>
> Let's install the sets!
> Location of sets? (cd0 cd1 disk http or 'done') [http]
> HTTP proxy URL? (e.g. 'http://proxy:8080', or 'none') [none]
> HTTP Server? (hostname, list#, 'done' or '?') [ftp.OpenBSD.org]
> Server directory? [pub/OpenBSD/6.2/sparc64]
>
> Select sets by entering a set name, a file name pattern or 'all'. De-select
> sets by prepending a '-', e.g.: '-game*'. Selected sets are labelled '[X]'.
> [X] bsd [X] base62.tgz [X] game62.tgz [X] xfont62.tgz
> [X] bsd.mp [X] comp62.tgz [X] xbase62.tgz [X] xserv62.tgz
> [X] bsd.rd [X] man62.tgz [X] xshare62.tgz
> Set name(s)? (or 'abort' or 'done') [done]
>
> Get/Verify SHA256.sig 0% | | 0 --:--
> ETA
> Get/Verify SHA256.sig 100% |**************************| 1985 00:00
> Signature Verified
>
> Get/Verify bsd 0% | | 0 --:--
> ETA
> Get/Verify bsd 6% |* | 640 KB 00:14
> ETA
> Get/Verify bsd 22% |***** | 2176 KB 00:07
> ETA
> Get/Verify bsd 49% |************ | 4864 KB 00:03
> ETA
> Get/Verify bsd 84% |********************* | 8320 KB 00:00
> ETA
> Get/Verify bsd 100% |**************************| 9834 KB 00:04
>
> Get/Verify bsd.mp 0% | | 0 --:--
> ETA
> Get/Verify bsd.mp 7% |* | 768 KB 00:12
> ETA
> Get/Verify bsd.mp 24% |****** | 2432 KB 00:06
> ETA
> Get/Verify bsd.mp 50% |************* | 4992 KB 00:02
> ETA
> Get/Verify bsd.mp 82% |********************* | 8192 KB 00:00
> ETA
> Get/Verify bsd.mp 100% |**************************| 9886 KB 00:04
>
> Get/Verify bsd.rd 0% | | 0 --:--
> ETA
> Get/Verify bsd.rd 28% |******* | 768 KB 00:02
> ETA
> Get/Verify bsd.rd 95% |************************ | 2560 KB 00:00
> ETA
> Get/Verify bsd.rd 95% |************************ | 2560 KB 00:00
> ETA
> Get/Verify bsd.rd 100% |**************************| 2668 KB 00:03
>
> Get/Verify base62.tgz 0% | | 0 --:--
> ETA
> Get/Verify base62.tgz 0% | | 640 KB 02:56
> ETA
> Get/Verify base62.tgz 1% | | 2176 KB 01:40
> ETA
> Get/Verify base62.tgz 4% |* | 4608 KB 01:09
> ETA
> Get/Verify base62.tgz 6% |* | 7424 KB 00:56
> ETA
> Get/Verify base62.tgz 9% |** | 11008 KB 00:45
> ETA
> Get/Verify base62.tgz 14% |*** | 15744 KB 00:36
> ETA
> Get/Verify base62.tgz 18% |**** | 20224 KB 00:31
> ETA
> Get/Verify base62.tgz 24% |****** | 26624 KB 00:25
> ETA
> Get/Verify base62.tgz 26% |****** | 29312 KB 00:25
> ETA
> Get/Verify base62.tgz 28% |******* | 32128 KB 00:24
> ETA
> Get/Verify base62.tgz 31% |******** | 35072 KB 00:23
> ETA
> Get/Verify base62.tgz 34% |******** | 38272 KB 00:22
> ETA
> Get/Verify base62.tgz 37% |********* | 41600 KB 00:21
> ETA
> Get/Verify base62.tgz 40% |********** | 45056 KB 00:20
> ETA
> Get/Verify base62.tgz 43% |*********** | 48640 KB 00:19
> ETA
> Get/Verify base62.tgz 47% |************ | 52352 KB 00:17
> ETA
> Get/Verify base62.tgz 50% |************* | 55424 KB 00:17
> ETA
> Get/Verify base62.tgz 53% |************* | 59008 KB 00:15
> ETA
> Get/Verify base62.tgz 56% |************** | 62080 KB 00:14
> ETA
> Get/Verify base62.tgz 59% |*************** | 65920 KB 00:13
> ETA
> Get/Verify base62.tgz 62% |**************** | 68992 KB 00:12
> ETA
> Get/Verify base62.tgz 65% |**************** | 72960 KB 00:11
> ETA
> Get/Verify base62.tgz 68% |***************** | 76032 KB 00:10
> ETA
> Get/Verify base62.tgz 72% |****************** | 80000 KB 00:09
> ETA
> Get/Verify base62.tgz 76% |******************* | 84224 KB 00:07
> ETA
> Get/Verify base62.tgz 80% |******************** | 88704 KB 00:06
> ETA
> Get/Verify base62.tgz 83% |********************* | 93056 KB 00:05
> ETA
> Get/Verify base62.tgz 88% |********************** | 97920 KB 00:03
> ETA
> Get/Verify base62.tgz 92% |*********************** | 100 MB 00:02
> ETA
> Get/Verify base62.tgz 97% |************************* | 105 MB 00:00
> ETA
> Get/Verify base62.tgz 100% |**************************| 108 MB 00:30
>
> Get/Verify comp62.tgz 0% | | 0 --:--
> ETA
> Get/Verify comp62.tgz 1% | | 896 KB 00:52
> ETA
> Get/Verify comp62.tgz 5% |* | 2816 KB 00:31
> ETA
> Get/Verify comp62.tgz 11% |** | 5632 KB 00:22
> ETA
> Get/Verify comp62.tgz 19% |**** | 9344 KB 00:16
> ETA
> Get/Verify comp62.tgz 29% |******* | 13952 KB 00:11
> ETA
> Get/Verify comp62.tgz 41% |********** | 19456 KB 00:08
> ETA
> Get/Verify comp62.tgz 54% |************** | 25600 KB 00:05
> ETA
> Get/Verify comp62.tgz 67% |***************** | 31744 KB 00:03
> ETA
> Get/Verify comp62.tgz 83% |********************* | 39552 KB 00:01
> ETA
> Get/Verify comp62.tgz 99% |************************* | 47104 KB 00:00
> ETA
> Get/Verify comp62.tgz 100% |**************************| 47128 KB 00:10
>
> Get/Verify man62.tgz 0% | | 0 --:--
> ETA
> Get/Verify man62.tgz 9% |** | 640 KB 00:10
> ETA
> Get/Verify man62.tgz 29% |******* | 2048 KB 00:04
> ETA
> Get/Verify man62.tgz 63% |**************** | 4480 KB 00:01
> ETA
> Get/Verify man62.tgz 98% |************************* | 6912 KB 00:00
> ETA
> Get/Verify man62.tgz 100% |**************************| 7015 KB 00:04
>
> Get/Verify game62.tgz 0% | | 0 --:--
> ETA
> Get/Verify game62.tgz 36% |********* | 1024 KB 00:01
> ETA
> Get/Verify game62.tgz 95% |************************ | 2688 KB 00:00
> ETA
> Get/Verify game62.tgz 100% |**************************| 2806 KB 00:02
>
> Get/Verify xbase62.tgz 0% | | 0 --:--
> ETA
> Get/Verify xbase62.tgz 3% | | 640 KB 00:26
> ETA
> Get/Verify xbase62.tgz 12% |*** | 2176 KB 00:14
> ETA
> Get/Verify xbase62.tgz 26% |****** | 4608 KB 00:08
> ETA
> Get/Verify xbase62.tgz 45% |*********** | 7936 KB 00:04
> ETA
> Get/Verify xbase62.tgz 62% |**************** | 10880 KB 00:03
> ETA
> Get/Verify xbase62.tgz 85% |********************** | 14976 KB 00:01
> ETA
> Get/Verify xbase62.tgz 100% |**************************| 17472 KB 00:06
>
> Get/Verify xshare62.tgz 0% | | 0 --:--
> ETA
> Get/Verify xshare62.tgz 14% |*** | 640 KB 00:05
> ETA
> Get/Verify xshare62.tgz 52% |************* | 2304 KB 00:01
> ETA
> Get/Verify xshare62.tgz 98% |************************* | 4352 KB 00:00
> ETA
> Get/Verify xshare62.tgz 98% |************************* | 4352 KB 00:00
> ETA
> Get/Verify xshare62.tgz 100% |**************************| 4419 KB 00:04
>
> Get/Verify xfont62.tgz 0% | | 0 --:--
> ETA
> Get/Verify xfont62.tgz 1% | | 768 KB 00:51
> ETA
> Get/Verify xfont62.tgz 6% |* | 2688 KB 00:27
> ETA
> Get/Verify xfont62.tgz 13% |*** | 5504 KB 00:18
> ETA
> Get/Verify xfont62.tgz 22% |***** | 8832 KB 00:13
> ETA
> Get/Verify xfont62.tgz 33% |******** | 13312 KB 00:09
> ETA
> Get/Verify xfont62.tgz 47% |************ | 18560 KB 00:06
> ETA
> Get/Verify xfont62.tgz 61% |*************** | 24064 KB 00:04
> ETA
> Get/Verify xfont62.tgz 77% |******************** | 30592 KB 00:02
> ETA
> Get/Verify xfont62.tgz 97% |************************* | 38400 KB 00:00
> ETA
> Get/Verify xfont62.tgz 100% |**************************| 39351 KB 00:09
>
> Get/Verify xserv62.tgz 0% | | 0 --:--
> ETA
> Get/Verify xserv62.tgz 6% |* | 640 KB 00:15
> ETA
> Get/Verify xserv62.tgz 22% |***** | 2304 KB 00:06
> ETA
> Get/Verify xserv62.tgz 46% |*********** | 4736 KB 00:03
> ETA
> Get/Verify xserv62.tgz 78% |******************** | 8064 KB 00:01
> ETA
> Get/Verify xserv62.tgz 100% |**************************| 10266 KB 00:04
>
> Installing bsd 0% | | 0 --:--
> ETA
> Installing bsd 100% |**************************| 9834 KB 00:00
>
> Installing bsd.mp 0% | | 0 --:--
> ETA
> Installing bsd.mp 100% |**************************| 9886 KB 00:00
>
> Installing bsd.rd 0% | | 0 --:--
> ETA
> Installing bsd.rd 100% |**************************| 2668 KB 00:00
>
> Installing base62.tgz 0% | | 0 --:--
> ETA
> Installing base62.tgz 11% |** | 12672 KB 00:07
> ETA
> Installing base62.tgz 21% |***** | 23936 KB 00:07
> ETA
> Installing base62.tgz 29% |******* | 32640 KB 00:07
> ETA
> Installing base62.tgz 34% |******** | 38528 KB 00:07
> ETA
> Installing base62.tgz 40% |********** | 44416 KB 00:07
> ETA
> Installing base62.tgz 45% |*********** | 50816 KB 00:07
> ETA
> Installing base62.tgz 65% |**************** | 72576 KB 00:03
> ETA
> Installing base62.tgz 96% |************************ | 104 MB 00:00
> ETA
> Installing base62.tgz 100% |**************************| 108 MB 00:08
>
> Extracting etc.tgz 0% | | 0 --:--
> ETA
> Extracting etc.tgz 100% |**************************| 189 KB 00:00
>
> Installing comp62.tgz 0% | | 0 --:--
> ETA
> Installing comp62.tgz 25% |****** | 12032 KB 00:02
> ETA
> Installing comp62.tgz 44% |*********** | 20992 KB 00:02
> ETA
> Installing comp62.tgz 66% |***************** | 31360 KB 00:01
> ETA
> Installing comp62.tgz 77% |******************** | 36480 KB 00:01
> ETA
> Installing comp62.tgz 99% |************************* | 47104 KB 00:00
> ETA
> Installing comp62.tgz 100% |**************************| 47128 KB 00:05
>
> Installing man62.tgz 0% | | 0 --:--
> ETA
> Installing man62.tgz 87% |********************** | 6144 KB 00:00
> ETA
> Installing man62.tgz 100% |**************************| 7015 KB 00:01
>
> Installing game62.tgz 0% | | 0 --:--
> ETA
> Installing game62.tgz 100% |**************************| 2806 KB 00:00
>
> Installing xbase62.tgz 0% | | 0 --:--
> ETA
> Installing xbase62.tgz 54% |************** | 9600 KB 00:00
> ETA
> Installing xbase62.tgz 93% |************************ | 16384 KB 00:00
> ETA
> Installing xbase62.tgz 100% |**************************| 17472 KB 00:02
>
> Extracting xetc.tgz 0% | | 0 --:--
> ETA
> Extracting xetc.tgz 100% |**************************| 7040 00:00
>
> Installing xshare62.tgz 0% | | 0 --:--
> ETA
> Installing xshare62.tgz 63% |**************** | 2816 KB 00:00
> ETA
> Installing xshare62.tgz 95% |************************ | 4224 KB 00:00
> ETA
> Installing xshare62.tgz 100% |**************************| 4419 KB 00:02
>
> Installing xfont62.tgz 0% | | 0 --:--
> ETA
> Installing xfont62.tgz 40% |********** | 16128 KB 00:01
> ETA
> Installing xfont62.tgz 68% |***************** | 27008 KB 00:00
> ETA
> Installing xfont62.tgz 96% |************************ | 38016 KB 00:00
> ETA
> Installing xfont62.tgz 100% |**************************| 39351 KB 00:03
>
> Installing xserv62.tgz 0% | | 0 --:--
> ETA
> Installing xserv62.tgz 100% |**************************| 10266 KB 00:00
> Location of sets? (cd0 cd1 disk http or 'done') [done]
> Saving configuration files...done.
> Making all device nodes...done.
> Multiprocessor machine; using bsd.mp instead of bsd.
> Relinking to create unique kernel...done.
>
> CONGRATULATIONS! Your OpenBSD install has been successfully completed!
> To boot the new system, enter 'reboot' at the command prompt.
> When you login to your new system the first time, please read your mail
> using the 'mail' command.
>
> # reboot
>
> syncing disks... done
>
> sd3 detached
>
> rebooting
>
>
> NOTICE: Entering OpenBoot.
> NOTICE: Fetching Guest MD from HV.
> NOTICE: Starting additional cpus.
> NOTICE: Initializing LDC services.
> NOTICE: Probing PCI devices.
> NOTICE: Finished PCI probing.
>
> SPARC T4-1, No Keyboard
> Copyright (c) 1998, 2016, Oracle and/or its affiliates. All rights reserved.
> OpenBoot 4.38.5, 127.5000 GB memory available, Serial #104767966.
> Ethernet address 0:10:e0:3e:a1:de, Host ID: 863ea1de.
>
>
>
> Boot device: disk0 File and args: sr0a:/bsd
> OpenBSD IEEE 1275 Bootblock 1.4
> > > OpenBSD BOOT 1.9
> ERROR: /iscsi-hba: No iscsi-network-bootpath property
> Unknown device: sr0
> Cannot boot from softraid: Unknown error: code 19
> Program terminated
> {0} ok
>
>
>
> On 12/27/17 04:52, Stefan Sperling wrote:
> > On Tue, Dec 26, 2017 at 12:56:53PM -0800, Jordan wrote:
> > > The install procedure I followed on the T4 was:
> > >
> > > 1) Boot install kernel and drop to shell and provision RAID partitions on
> > > both disks using the letter ???a??? via disklabel(8)
> > >
> > > 2) Assemble RAID volume with # bioctl -c 1 -l /dev/sd0a,/dev/sd1a
> > > softraid0
> > >
> > > 3) I zeroed the first 10MB of the RAID volume with # dd if=/dev/urandom
> > > of=/dev/rsd2c bs=1m
> > Step 3 might get you in trouble. You're writing to the raw disk device
> > so this command might nuke disklabel and/or softraid meta data.
> >
> > > 4) I finished off the install as usual by typing ???install??? into
> > > command line
> > > and proceeded normally
> > >
> > > 5) I then rebooted and set the boot parameters at the ok prompt as per
> > > boot_sparc(8)
> > > In short, on sparc64, is softraid boot like that of i386/amd64 where
> > > everything including root is stored within the RAID volume,
> > Yes, except as mentioned the RAID fs needs to be on an 'a' partition.
> >
> > > or does sparc64
> > > require me to have a small partition at the beginning of my physical disks
> > > containing the kernel and ofwboot?
> > No it does not.
>
