I am writing this from OpenBSD 6.2 apollo Lake, J4205 cpu. Intel drm works. But crash if I exit x, and then run startx again.
penBSD 6.2 (GENERIC.MP) #2: Sun Dec 10 21:14:42 CET 2017 r...@syspatch-62-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/ GENERIC.MP real mem = 8209797120 (7829MB) avail mem = 7953960960 (7585MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 3.0 @ 0xed450 (18 entries) bios0: vendor American Megatrends Inc. version "P1.40" date 07/14/2017 bios0: ASRock J3455-ITX acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP FPDT FIDT MCFG DBG2 DBGP HPET LPIT APIC NPKT PRAM WSMT SSDT SSDT AAFT SSDT SSDT SSDT SSDT SSDT UEFI TPM2 BERT WDAT NHLT acpi0: wakeup devices SIO1(S3) UAR1(S4) HDAS(S3) XHC_(S4) XDCI(S4) BRCM(S0) PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) [...] acpitimer0 at acpi0: 3579545 Hz, 32 bits acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 acpihpet0 at acpi0: 19200000 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Celeron(R) CPU J3455 @ 1.50GHz, 1497.60 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,SENSOR,ARAT cpu0: 1MB 64b/line 16-way L2 cache cpu0: TSC frequency 1497600000 Hz cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges cpu0: apic clock running at 19MHz cpu0: mwait min=64, max=64, C-substates=0.2.0.2.4.2.1.1, IBE cpu1 at mainbus0: apid 2 (application processor) cpu1: Intel(R) Celeron(R) CPU J3455 @ 1.50GHz, 1497.60 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,SENSOR,ARAT cpu1: 1MB 64b/line 16-way L2 cache cpu1: smt 0, core 1, package 0 cpu2 at mainbus0: apid 4 (application processor) cpu2: Intel(R) Celeron(R) CPU J3455 @ 1.50GHz, 1497.60 MHz cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,SENSOR,ARAT cpu2: 1MB 64b/line 16-way L2 cache cpu2: smt 0, core 2, package 0 cpu3 at mainbus0: apid 6 (application processor) cpu3: Intel(R) Celeron(R) CPU J3455 @ 1.50GHz, 1497.60 MHz cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,SENSOR,ARAT cpu3: 1MB 64b/line 16-way L2 cache cpu3: smt 0, core 3, package 0 ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 120 pins acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (RP03) acpiprt2 at acpi0: bus 2 (RP04) acpiprt3 at acpi0: bus 3 (RP05) acpiprt4 at acpi0: bus 4 (RP06) acpiec0 at acpi0: not present acpicpu0 at acpi0: C3(10@150 mwait.1@0x60), C2(10@50 mwait.1@0x21), C1(1000@1 mwait.1@0x1), PSS acpicpu1 at acpi0: C3(10@150 mwait.1@0x60), C2(10@50 mwait.1@0x21), C1(1000@1 mwait.1@0x1), PSS acpicpu2 at acpi0: C3(10@150 mwait.1@0x60), C2(10@50 mwait.1@0x21), C1(1000@1 mwait.1@0x1), PSS acpicpu3 at acpi0: C3(10@150 mwait.1@0x60), C2(10@50 mwait.1@0x21), C1(1000@1 mwait.1@0x1), PSS acpipwrres0 at acpi0: FN00, resource for FAN0 acpitz0 at acpi0: critical temperature is 100 degC acpibtn0 at acpi0: PWRB "INT3452" at acpi0 not configured "INT3452" at acpi0 not configured "INT3452" at acpi0 not configured "INT3452" at acpi0 not configured "INT33A1" at acpi0 not configured "MSFT0101" at acpi0 not configured "PNP0C0B" at acpi0 not configured acpivideo0 at acpi0: GFX0 acpivout0 at acpivideo0: DD1F cpu0: Enhanced SpeedStep 1497 MHz: speeds: 1501, 1500, 1400, 1300, 1200, 1100, 1000, 900, 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x5af0 rev 0x0b inteldrm0 at pci0 dev 2 function 0 vendor "Intel", unknown product 0x5a85 rev 0x0b drm0 at inteldrm0 inteldrm0: msi error: [drm:pid0:i915_firmware_load_error_print] *ERROR* failed to load firmware i915/bxt_dmc_ver1.bin (-22) error: [drm:pid0:i915_gem_init_hw] *ERROR* Failed to initialize GuC, error -8 (ignored) inteldrm0: 1920x1080, 32bpp wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) wsdisplay0: screen 1-5 added (std, vt100 emulation) On Tue, Jan 16, 2018 at 7:05 PM, Marcus MERIGHI <mcmer-open...@tor.at> wrote: > n.reu...@hxgn.net (Nils Reu??e), 2018.01.16 (Tue) 16:29 (CET): > > Hi all, > > > > I'm still investigating the issue, and while reading the motherboards > > handbook, i noticed that it has a COM1 connection port. I've never > > done anything over serial, but if i understand the FAQ correctly, i > > could attach an adapter and get the boot messages over the serial > > console, and if there is a kernel panic even play around in ddb. > > > > Is that correct, and would i need any (other) hardware than the ones > > listed below? (sorry for german amazon) > > > > https://www.amazon.de/dp/B0015S32W4/ > > https://www.amazon.de/dp/B00QUZY4UG/ > > if it has the chip it says it has ("mit PL2303 Chipsatz") then: > > uplcom(4) - Prolific PL-2303 USB serial adapter > > Marcus > >