Hello all,
I'm having virtual drive problems on a Dell 2900. When no virtual drives
are set up in the PERC 6/i controller, the server will not hang. However,
when there are virtual drives available on the system, it appears the
system is hanging at the probe stage -- I'm just guessing that's what is
occurring. The hang occurs on a fully installed kernel and ramdisk kernels.
I have a full install on a SATA drive for the testing, currently.
I've tried booting with the single processor kernel and even the i386
ramdisk kernel. To complete boot, I'm disabling the mfi driver so the PERC
6/i is not configured, or alternatively removing configured virtual drives.
I've tried different virtual drive configurations to see if that's the
issue, all the way down to a single hdd configured as RAID-0. It hangs
regardless of configuration. The hang position in dmesg would be "scsibus7
at softraid0: 256 targets" -- see below. That is the last message displayed
on the console.
I compiled and tried a couple of different kernels with SCSIDEBUG and
various SCSIDEBUG options to see if it would report anything before the
hang, with no luck. I also tried to see if mfi or softraid would report
anything, but I must be missing a compile option to get these working,
because the compiler had errors with these options set:
option MFI_DEBUG - wanted to see if mfi reported anything
option SR_DEBUG - wanted to see of softraid reported anything
It's also VERY possible I have the wrong SCSIDEBUG options set. The two I
tried were:
# i don't understand these options well enough
option SCSIDEBUG
option SCSIDEBUG_LEVEL=0x0080
option SCSIDEBUG_BUSES=0x8
option SCSIDEBUG_TARGETS=0x1
option SCSIDEBUG_LUN=0x1
# hell, let's go for it
option SCSIDEBUG
option SCSIDEBUG_LEVEL=0x0080
option SCSIDEBUG_BUSES=0xff
option SCSIDEBUG_TARGETS=0xff
option SCSIDEBUG_LUN=0xff
I didn't see any differences.
Does anyone have any suggestions on further troubleshooting and/or better
SCSIDEBUG options? Am I digging in the wrong area? I appreciate any
thoughts or suggestions. I'm attaching 3 dmesg's. The first has mfi enabled
and no virtual drives configured, the second has mfi disabled, and the
third has SCSIDEBUG enabled with mfi disabled, to capture the dmesg.
Thanks,
Tracey
No virtual drives
------------------------
OpenBSD 6.3 (GENERIC.MP) #107: Sat Mar 24 14:21:59 MDT 2018
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 12863209472 (12267MB)
avail mem = 12466286592 (11888MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xcfb9c000 (64 entries)
bios0: vendor Dell Inc. version "2.0.1" date 10/27/2007
bios0: Dell Inc. PowerEdge 2900
acpi0 at bios0: rev 2
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP APIC SPCR HPET MCFG WD__ SLIC ERST HEST BERT EINJ
TCPA
acpi0: wakeup devices PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E5410 @ 2.33GHz, 2327.86 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
cpu0: 6MB 64b/line 16-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 332MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Xeon(R) CPU E5410 @ 2.33GHz, 2327.51 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
cpu1: 6MB 64b/line 16-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Xeon(R) CPU E5410 @ 2.33GHz, 2327.53 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
cpu2: 6MB 64b/line 16-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Xeon(R) CPU E5410 @ 2.33GHz, 2327.51 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
cpu3: 6MB 64b/line 16-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
, remapped to apid 4
ioapic1 at mainbus0: apid 5 pa 0xfec80000, version 20, 24 pins
, remapped to apid 5
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 4 (PEX2)
acpiprt2 at acpi0: bus 5 (UPST)
acpiprt3 at acpi0: bus 6 (DWN1)
acpiprt4 at acpi0: bus 8 (DWN2)
acpiprt5 at acpi0: bus 9 (PE2X)
acpiprt6 at acpi0: bus 10 (PEX3)
acpiprt7 at acpi0: bus 11 (PEX4)
acpiprt8 at acpi0: bus 1 (PEX5)
acpiprt9 at acpi0: bus -1 (PE2P)
acpiprt10 at acpi0: bus 12 (PEX6)
acpiprt11 at acpi0: bus 2 (SBEX)
acpiprt12 at acpi0: bus 14 (COMP)
acpicpu0 at acpi0: C1(@1 halt!)
acpicpu1 at acpi0: C1(@1 halt!)
acpicpu2 at acpi0: C1(@1 halt!)
acpicpu3 at acpi0: C1(@1 halt!)
"PNP0C33" at acpi0 not configured
"IPI0001" at acpi0 not configured
ipmi at mainbus0 not configured
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 5000X Host" rev 0x12
ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE" rev 0x12
pci1 at ppb0 bus 4
ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci2 at ppb1 bus 5
ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci3 at ppb2 bus 6
ppb3 at pci3 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci4 at ppb3 bus 7
bnx0 at pci4 dev 0 function 0 "Broadcom BCM5708" rev 0x12: apic 4 int 16
ppb4 at pci2 dev 1 function 0 "Intel 6321ESB PCIE" rev 0x01: msi
pci5 at ppb4 bus 8
ppb5 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01
pci6 at ppb5 bus 9
ahd0 at pci6 dev 1 function 0 "Adaptec AHA-39320A U320" rev 0x10: apic 5
int 0
ahd0: aic7902, U320 Wide Channel A, PCI-X 101-133MHz, 512 SCBs
scsibus1 at ahd0: 16 targets, initiator 7
ahd1 at pci6 dev 1 function 1 "Adaptec AHA-39320A U320" rev 0x10: apic 5
int 1
ahd1: aic7902, U320 Wide Channel B, PCI-X 101-133MHz, 512 SCBs
scsibus2 at ahd1: 16 targets, initiator 7
ppb6 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0x12: msi
pci7 at ppb6 bus 10
ppb7 at pci0 dev 4 function 0 "Intel 5000 PCIE" rev 0x12: msi
pci8 at ppb7 bus 11
em0 at pci8 dev 0 function 0 "Intel 82571EB" rev 0x06: apic 4 int 16,
address 00:15:17:5b:6d:08
em1 at pci8 dev 0 function 1 "Intel 82571EB" rev 0x06: apic 4 int 17,
address 00:15:17:5b:6d:09
ppb8 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0x12
pci9 at ppb8 bus 1
mfi0 at pci9 dev 0 function 0 "Symbios Logic SAS1078" rev 0x04: apic 4 int
18
mfi0: "PERC 6/i Integrated", firmware 6.0.1-0080, 256MB cache
scsibus3 at mfi0: 64 targets
ppb9 at pci0 dev 6 function 0 "Intel 5000 PCIE x8" rev 0x12: msi
pci10 at ppb9 bus 12
ahci0 at pci10 dev 0 function 0 "ASMedia ASM1061 AHCI" rev 0x01: msi, AHCI
1.2
scsibus4 at ahci0: 32 targets
ppb10 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0x12
pci11 at ppb10 bus 13
pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0x12
pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0x12
pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0x12
pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0x12
pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0x12
pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0x12
pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0x12
ppb11 at pci0 dev 28 function 0 "Intel 6321ESB PCIE" rev 0x09
pci12 at ppb11 bus 2
ppb12 at pci12 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci13 at ppb12 bus 3
bnx1 at pci13 dev 0 function 0 "Broadcom BCM5708" rev 0x12: apic 4 int 16
uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: apic 4 int 21
uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: apic 4 int 20
uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: apic 4 int 21
uhci3 at pci0 dev 29 function 3 "Intel 6321ESB USB" rev 0x09: apic 4 int 20
ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: apic 4 int 21
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
ppb13 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xd9
pci14 at ppb13 bus 14
radeondrm0 at pci14 dev 13 function 0 "ATI ES1000" rev 0x02
drm0 at radeondrm0
radeondrm0: apic 4 int 19
pcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09
pciide0 at pci0 dev 31 function 2 "Intel 6321ESB SATA" rev 0x09: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 4 int 23 for native-PCI interrupt
atapiscsi0 at pciide0 channel 0 drive 0
scsibus5 at atapiscsi0: 2 targets
cd0 at scsibus5 targ 0 lun 0: <HL-DT-ST, CDRW/DVD GCCH30N, A101> ATAPI
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd0 at pciide0 channel 1 drive 0: <ST1000DM003-1ER162>
wd0: 16-sector PIO, LBA48, 953869MB, 1953525168 sectors
wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 6
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX
uhub5 at uhub0 port 3 configuration 1 interface 0 "Standard Microsystems
product 0x2524" rev 2.00/0.00 addr 2
uhidev0 at uhub5 port 1 configuration 1 interface 0 "Belkin Corporation
Flip KVM" rev 1.10/2.34 addr 3
uhidev0: iclass 3/1
ums0 at uhidev0: 5 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub5 port 1 configuration 1 interface 1 "Belkin Corporation
Flip KVM" rev 1.10/2.34 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes, country code 33
wskbd1 at ukbd0 mux 1
uhidev2 at uhub5 port 3 configuration 1 interface 0 "PixArt USB Optical
Mouse" rev 2.00/1.00 addr 4
uhidev2: iclass 3/1
ums1 at uhidev2: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
uhidev3 at uhub5 port 4 configuration 1 interface 0 "Dell Dell USB Wired
Entry Keyboard" rev 1.10/1.78 addr 5
uhidev3: iclass 3/1
ukbd1 at uhidev3: 8 variable keys, 6 key codes
wskbd2 at ukbd1 mux 1
uhidev4 at uhub5 port 4 configuration 1 interface 1 "Dell Dell USB Wired
Entry Keyboard" rev 1.10/1.78 addr 5
uhidev4: iclass 3/0, 2 report ids
uhid0 at uhidev4 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev4 reportid 2: input=2, output=0, feature=0
uhub6 at uhub0 port 7 configuration 1 interface 0 "Cypress Semiconductor
USB2 Hub" rev 2.00/0.0b addr 6
vscsi0 at root
scsibus6 at vscsi0: 256 targets <----- here is where the system hangs when
virtual drives are present
softraid0 at root
scsibus7 at softraid0: 256 targets
root on wd0a (6cb1900a73b899ae.a) swap on wd0b dump on wd0b
bnx0: address 00:1e:4f:11:8b:ab
brgphy0 at bnx0 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
bnx1: address 00:1e:4f:11:8b:a9
brgphy1 at bnx1 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
radeondrm0: 1280x1024, 8bpp
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wskbd2: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
mfi disabled
--------------------------
OpenBSD 6.3 (GENERIC.MP) #107: Sat Mar 24 14:21:59 MDT 2018
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 12863209472 (12267MB)
avail mem = 12466290688 (11888MB)
User Kernel Config
UKC> disable mfi
84 mfi* disabled
UKC> e
Unknown command, try help
UKC> exit
Continuing...
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xcfb9c000 (64 entries)
bios0: vendor Dell Inc. version "2.0.1" date 10/27/2007
bios0: Dell Inc. PowerEdge 2900
acpi0 at bios0: rev 2
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP APIC SPCR HPET MCFG WD__ SLIC ERST HEST BERT EINJ
TCPA
acpi0: wakeup devices PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E5410 @ 2.33GHz, 2327.84 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
cpu0: 6MB 64b/line 16-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 332MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Xeon(R) CPU E5410 @ 2.33GHz, 2327.50 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
cpu1: 6MB 64b/line 16-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Xeon(R) CPU E5410 @ 2.33GHz, 2327.52 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
cpu2: 6MB 64b/line 16-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Xeon(R) CPU E5410 @ 2.33GHz, 2327.50 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
cpu3: 6MB 64b/line 16-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
, remapped to apid 4
ioapic1 at mainbus0: apid 5 pa 0xfec80000, version 20, 24 pins
, remapped to apid 5
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 4 (PEX2)
acpiprt2 at acpi0: bus 5 (UPST)
acpiprt3 at acpi0: bus 6 (DWN1)
acpiprt4 at acpi0: bus 8 (DWN2)
acpiprt5 at acpi0: bus 9 (PE2X)
acpiprt6 at acpi0: bus 10 (PEX3)
acpiprt7 at acpi0: bus 11 (PEX4)
acpiprt8 at acpi0: bus 1 (PEX5)
acpiprt9 at acpi0: bus -1 (PE2P)
acpiprt10 at acpi0: bus 12 (PEX6)
acpiprt11 at acpi0: bus 2 (SBEX)
acpiprt12 at acpi0: bus 14 (COMP)
acpicpu0 at acpi0: C1(@1 halt!)
acpicpu1 at acpi0: C1(@1 halt!)
acpicpu2 at acpi0: C1(@1 halt!)
acpicpu3 at acpi0: C1(@1 halt!)
"PNP0C33" at acpi0 not configured
"IPI0001" at acpi0 not configured
ipmi at mainbus0 not configured
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 5000X Host" rev 0x12
ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE" rev 0x12
pci1 at ppb0 bus 4
ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci2 at ppb1 bus 5
ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci3 at ppb2 bus 6
ppb3 at pci3 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci4 at ppb3 bus 7
bnx0 at pci4 dev 0 function 0 "Broadcom BCM5708" rev 0x12: apic 4 int 16
ppb4 at pci2 dev 1 function 0 "Intel 6321ESB PCIE" rev 0x01: msi
pci5 at ppb4 bus 8
ppb5 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01
pci6 at ppb5 bus 9
ahd0 at pci6 dev 1 function 0 "Adaptec AHA-39320A U320" rev 0x10: apic 5
int 0
ahd0: aic7902, U320 Wide Channel A, PCI-X 101-133MHz, 512 SCBs
scsibus1 at ahd0: 16 targets, initiator 7
ahd1 at pci6 dev 1 function 1 "Adaptec AHA-39320A U320" rev 0x10: apic 5
int 1
ahd1: aic7902, U320 Wide Channel B, PCI-X 101-133MHz, 512 SCBs
scsibus2 at ahd1: 16 targets, initiator 7
ppb6 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0x12: msi
pci7 at ppb6 bus 10
ppb7 at pci0 dev 4 function 0 "Intel 5000 PCIE" rev 0x12: msi
pci8 at ppb7 bus 11
em0 at pci8 dev 0 function 0 "Intel 82571EB" rev 0x06: apic 4 int 16,
address 00:15:17:5b:6d:08
em1 at pci8 dev 0 function 1 "Intel 82571EB" rev 0x06: apic 4 int 17,
address 00:15:17:5b:6d:09
ppb8 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0x12
pci9 at ppb8 bus 1
"Symbios Logic SAS1078" rev 0x04 at pci9 dev 0 function 0 not configured
ppb9 at pci0 dev 6 function 0 "Intel 5000 PCIE x8" rev 0x12: msi
pci10 at ppb9 bus 12
ahci0 at pci10 dev 0 function 0 "ASMedia ASM1061 AHCI" rev 0x01: msi, AHCI
1.2
scsibus3 at ahci0: 32 targets
ppb10 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0x12
pci11 at ppb10 bus 13
pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0x12
pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0x12
pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0x12
pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0x12
pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0x12
pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0x12
pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0x12
ppb11 at pci0 dev 28 function 0 "Intel 6321ESB PCIE" rev 0x09
pci12 at ppb11 bus 2
ppb12 at pci12 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci13 at ppb12 bus 3
bnx1 at pci13 dev 0 function 0 "Broadcom BCM5708" rev 0x12: apic 4 int 16
uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: apic 4 int 21
uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: apic 4 int 20
uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: apic 4 int 21
uhci3 at pci0 dev 29 function 3 "Intel 6321ESB USB" rev 0x09: apic 4 int 20
ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: apic 4 int 21
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
ppb13 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xd9
pci14 at ppb13 bus 14
radeondrm0 at pci14 dev 13 function 0 "ATI ES1000" rev 0x02
drm0 at radeondrm0
radeondrm0: apic 4 int 19
pcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09
pciide0 at pci0 dev 31 function 2 "Intel 6321ESB SATA" rev 0x09: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 4 int 23 for native-PCI interrupt
atapiscsi0 at pciide0 channel 0 drive 0
scsibus4 at atapiscsi0: 2 targets
cd0 at scsibus4 targ 0 lun 0: <HL-DT-ST, CDRW/DVD GCCH30N, A101> ATAPI
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd0 at pciide0 channel 1 drive 0: <ST1000DM003-1ER162>
wd0: 16-sector PIO, LBA48, 953869MB, 1953525168 sectors
wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 6
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX
uhub5 at uhub0 port 3 configuration 1 interface 0 "Standard Microsystems
product 0x2524" rev 2.00/0.00 addr 2
uhidev0 at uhub5 port 1 configuration 1 interface 0 "Belkin Corporation
Flip KVM" rev 1.10/2.34 addr 3
uhidev0: iclass 3/1
ums0 at uhidev0: 5 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub5 port 1 configuration 1 interface 1 "Belkin Corporation
Flip KVM" rev 1.10/2.34 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes, country code 33
wskbd1 at ukbd0 mux 1
uhidev2 at uhub5 port 3 configuration 1 interface 0 "PixArt USB Optical
Mouse" rev 2.00/1.00 addr 4
uhidev2: iclass 3/1
ums1 at uhidev2: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
uhidev3 at uhub5 port 4 configuration 1 interface 0 "Dell Dell USB Wired
Entry Keyboard" rev 1.10/1.78 addr 5
uhidev3: iclass 3/1
ukbd1 at uhidev3: 8 variable keys, 6 key codes
wskbd2 at ukbd1 mux 1
uhidev4 at uhub5 port 4 configuration 1 interface 1 "Dell Dell USB Wired
Entry Keyboard" rev 1.10/1.78 addr 5
uhidev4: iclass 3/0, 2 report ids
uhid0 at uhidev4 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev4 reportid 2: input=2, output=0, feature=0
uhub6 at uhub0 port 7 configuration 1 interface 0 "Cypress Semiconductor
USB2 Hub" rev 2.00/0.0b addr 6
vscsi0 at root
scsibus5 at vscsi0: 256 targets
softraid0 at root
scsibus6 at softraid0: 256 targets
root on wd0a (6cb1900a73b899ae.a) swap on wd0b dump on wd0b
bnx0: address 00:1e:4f:11:8b:ab
brgphy0 at bnx0 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
bnx1: address 00:1e:4f:11:8b:a9
brgphy1 at bnx1 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
radeondrm0: 1280x1024, 8bpp
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wskbd2: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
SCSIDEBUG and mfi disabled
--------------------------------------
OpenBSD 6.3 (GENERIC.MP) #1: Fri Apr 20 13:51:59 MDT 2018
root@my.great.server:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 12863209472 (12267MB)
avail mem = 12466294784 (11888MB)
User Kernel Config
UKC> disable mfi
84 mfi* disabled
UKC> exit
Continuing...
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xcfb9c000 (64 entries)
bios0: vendor Dell Inc. version "2.0.1" date 10/27/2007
bios0: Dell Inc. PowerEdge 2900
acpi0 at bios0: rev 2
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP APIC SPCR HPET MCFG WD__ SLIC ERST HEST BERT EINJ
TCPA
acpi0: wakeup devices PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E5410 @ 2.33GHz, 2327.83 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
cpu0: 6MB 64b/line 16-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 332MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Xeon(R) CPU E5410 @ 2.33GHz, 2327.51 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
cpu1: 6MB 64b/line 16-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Xeon(R) CPU E5410 @ 2.33GHz, 2327.53 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
cpu2: 6MB 64b/line 16-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Xeon(R) CPU E5410 @ 2.33GHz, 2327.51 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
cpu3: 6MB 64b/line 16-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
, remapped to apid 4
ioapic1 at mainbus0: apid 5 pa 0xfec80000, version 20, 24 pins
, remapped to apid 5
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 4 (PEX2)
acpiprt2 at acpi0: bus 5 (UPST)
acpiprt3 at acpi0: bus 6 (DWN1)
acpiprt4 at acpi0: bus 8 (DWN2)
acpiprt5 at acpi0: bus 9 (PE2X)
acpiprt6 at acpi0: bus 10 (PEX3)
acpiprt7 at acpi0: bus 11 (PEX4)
acpiprt8 at acpi0: bus 1 (PEX5)
acpiprt9 at acpi0: bus -1 (PE2P)
acpiprt10 at acpi0: bus 12 (PEX6)
acpiprt11 at acpi0: bus 2 (SBEX)
acpiprt12 at acpi0: bus 14 (COMP)
acpicpu0 at acpi0: C1(@1 halt!)
acpicpu1 at acpi0: C1(@1 halt!)
acpicpu2 at acpi0: C1(@1 halt!)
acpicpu3 at acpi0: C1(@1 halt!)
"PNP0C33" at acpi0 not configured
"IPI0001" at acpi0 not configured
ipmi at mainbus0 not configured
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 5000X Host" rev 0x12
ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE" rev 0x12
pci1 at ppb0 bus 4
ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci2 at ppb1 bus 5
ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci3 at ppb2 bus 6
ppb3 at pci3 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci4 at ppb3 bus 7
bnx0 at pci4 dev 0 function 0 "Broadcom BCM5708" rev 0x12: apic 4 int 16
ppb4 at pci2 dev 1 function 0 "Intel 6321ESB PCIE" rev 0x01: msi
pci5 at ppb4 bus 8
ppb5 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01
pci6 at ppb5 bus 9
ahd0 at pci6 dev 1 function 0 "Adaptec AHA-39320A U320" rev 0x10: apic 5
int 0
ahd0: aic7902, U320 Wide Channel A, PCI-X 101-133MHz, 512 SCBs
scsibus1 at ahd0: 16 targets, initiator 7
ahd1 at pci6 dev 1 function 1 "Adaptec AHA-39320A U320" rev 0x10: apic 5
int 1
ahd1: aic7902, U320 Wide Channel B, PCI-X 101-133MHz, 512 SCBs
scsibus2 at ahd1: 16 targets, initiator 7
ppb6 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0x12: msi
pci7 at ppb6 bus 10
ppb7 at pci0 dev 4 function 0 "Intel 5000 PCIE" rev 0x12: msi
pci8 at ppb7 bus 11
em0 at pci8 dev 0 function 0 "Intel 82571EB" rev 0x06: apic 4 int 16,
address 00:15:17:5b:6d:08
em1 at pci8 dev 0 function 1 "Intel 82571EB" rev 0x06: apic 4 int 17,
address 00:15:17:5b:6d:09
ppb8 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0x12
pci9 at ppb8 bus 1
"Symbios Logic SAS1078" rev 0x04 at pci9 dev 0 function 0 not configured
ppb9 at pci0 dev 6 function 0 "Intel 5000 PCIE x8" rev 0x12: msi
pci10 at ppb9 bus 12
ahci0 at pci10 dev 0 function 0 "ASMedia ASM1061 AHCI" rev 0x01: msi, AHCI
1.2
scsibus3 at ahci0: 32 targets
ppb10 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0x12
pci11 at ppb10 bus 13
pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0x12
pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0x12
pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0x12
pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0x12
pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0x12
pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0x12
pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0x12
ppb11 at pci0 dev 28 function 0 "Intel 6321ESB PCIE" rev 0x09
pci12 at ppb11 bus 2
ppb12 at pci12 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci13 at ppb12 bus 3
bnx1 at pci13 dev 0 function 0 "Broadcom BCM5708" rev 0x12: apic 4 int 16
uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: apic 4 int 21
uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: apic 4 int 20
uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: apic 4 int 21
uhci3 at pci0 dev 29 function 3 "Intel 6321ESB USB" rev 0x09: apic 4 int 20
ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: apic 4 int 21
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
ppb13 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xd9
pci14 at ppb13 bus 14
radeondrm0 at pci14 dev 13 function 0 "ATI ES1000" rev 0x02
drm0 at radeondrm0
radeondrm0: apic 4 int 19
pcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09
pciide0 at pci0 dev 31 function 2 "Intel 6321ESB SATA" rev 0x09: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 4 int 23 for native-PCI interrupt
atapiscsi0 at pciide0 channel 0 drive 0
scsibus4 at atapiscsi0: 2 targets
probe(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x0
SENSE KEY: Unit Attention
ASC/ASCQ: Power On, Reset, or Bus Device Reset Occurred
scsi_inqmatch: 2/5/1 <, , >
probe(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x0
SENSE KEY: Not Ready
ASC/ASCQ: Medium Not Present
cd0 at scsibus4 targ 0 lun 0: <HL-DT-ST, CDRW/DVD GCCH30N, A101> ATAPI
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd0 at pciide0 channel 1 drive 0: <ST1000DM003-1ER162>
wd0: 16-sector PIO, LBA48, 953869MB, 1953525168 sectors
wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 6
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX
uhub5 at uhub0 port 3 configuration 1 interface 0 "Standard Microsystems
product 0x2524" rev 2.00/0.00 addr 2
uhidev0 at uhub5 port 1 configuration 1 interface 0 "Belkin Corporation
Flip KVM" rev 1.10/2.34 addr 3
uhidev0: iclass 3/1
ums0 at uhidev0: 5 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub5 port 1 configuration 1 interface 1 "Belkin Corporation
Flip KVM" rev 1.10/2.34 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes, country code 33
wskbd1 at ukbd0 mux 1
uhidev2 at uhub5 port 3 configuration 1 interface 0 "PixArt USB Optical
Mouse" rev 2.00/1.00 addr 4
uhidev2: iclass 3/1
ums1 at uhidev2: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
uhidev3 at uhub5 port 4 configuration 1 interface 0 "Dell Dell USB Wired
Entry Keyboard" rev 1.10/1.78 addr 5
uhidev3: iclass 3/1
ukbd1 at uhidev3: 8 variable keys, 6 key codes
wskbd2 at ukbd1 mux 1
uhidev4 at uhub5 port 4 configuration 1 interface 1 "Dell Dell USB Wired
Entry Keyboard" rev 1.10/1.78 addr 5
uhidev4: iclass 3/0, 2 report ids
uhid0 at uhidev4 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev4 reportid 2: input=2, output=0, feature=0
uhub6 at uhub0 port 7 configuration 1 interface 0 "Cypress Semiconductor
USB2 Hub" rev 2.00/0.0b addr 6
vscsi0 at root
scsibus5 at vscsi0: 256 targets
softraid0 at root
scsibus6 at softraid0: 256 targets
root on wd0a (6cb1900a73b899ae.a) swap on wd0b dump on wd0b
bnx0: address 00:1e:4f:11:8b:ab
brgphy0 at bnx0 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
bnx1: address 00:1e:4f:11:8b:a9
brgphy1 at bnx1 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
radeondrm0: 1280x1024, 8bpp
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wskbd2: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
