Hello,
On Mon, Oct 22, 2018 at 4:24 PM Remi Locherer <remi.loche...@relo.ch> wrote:
>
> On Mon, Oct 22, 2018 at 08:48:28AM +0200, open...@kene.nu wrote:
> > Hello,
> >
> > I am having trouble with ospfd not updating the kernel fib as it
> > should (I think). This is in my lab environment on vagrant.
> >
> > host# uname -a
> > OpenBSD host 6.4 GENERIC.MP#329 amd64
> > host# ospfctl sh rib | grep 172.29.21.2
> > 172.29.21.2/32 172.29.2.10 Intra-Area Network 20
> > 00:03:12
> > host# ospfctl sh fib | grep 172.29.21.2
> > *O 32 172.29.21.2/32 172.29.2.10
> > host# netstat -rn | grep 172.29.21.2
> > host# cat /etc/ospfd.conf
> > router-id 172.29.23.2
> >
> > area 0.0.0.0 {
> > auth-type crypt
> > auth-md 1 "one"
> > auth-md 2 "two"
> > auth-md-keyid 1
> > }
>
> Is this the config that was active while you produced above outputs?
> It does not contain any interface statements.
>
Oh, I accidentally, and erroneously, stripped those along with other
non relevant config. Assume the interface statements are there.
> >
> > So, what is going on? The route is in the ospfd fib but not in the
> > kernel fib. I understand that the next hop must be reachable, and it
> > is. Other than that I have no idea what qualifies a route to be
> > propagated from ospf fib to kernel fib.
> >
