On Sat, 15 Jun 2019 19:36:23 +1000
Jonathan Gray <j...@jsg.id.au> wrote:
> On Sat, Jun 15, 2019 at 09:02:11AM +0100, Richard Laysell wrote:
> >
> > Hello,
> >
> > I was trying OpenBSD on a Supermicro A2SDi-4C-HLN4F which uses an
> > Intel Atom CPU (Denverton). The board boots but most devices are
> > not detected because ACPI can't be enabled.
> >
> > Does anyone know if this is likely to be supported at some point?
>
> Try a snapshot. ACPI changes were made for a similiar machine
> (Lanner NCA-1510) in May.
>
> However there is no support for the integrated X553 Ethernet at the
> moment.
>
Thanks Jonathan.
For those interested the dmesg from the latest snapshot (2019-06-15) is
below. Significant improvement, but (as Jonathan mentions) no Ethernet
as yet.
OpenBSD 6.5-current (RAMDISK_CD) #27: Fri Jun 14 22:24:30 MDT 2019
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 17125621760 (16332MB)
avail mem = 16602619904 (15833MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0x7f0c3000 (35 entries)
bios0: vendor American Megatrends Inc. version "1.1b" date 12/17/2018
bios0: Supermicro Super Server
acpi0 at bios0: ACPI 6.1
acpi0: tables DSDT FACP FPDT FIDT SPMI MCFG WDAT APIC BDAT HPET UEFI SSDT DMAR
HEST BERT ERST EINJ WSMT
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 4 (boot processor)
cpu0: Intel(R) Atom(TM) CPU C3558 @ 2.20GHz, 2200.41 MHz, 06-5f-01
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,IBRS,IBPB,STIBP,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu0: 2MB 64b/line 16-way L2 cache
cpu0: cannot disable silicon debug
cpu0: apic clock running at 25MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.2, IBE
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 6 (VRP0)
acpiprt2 at acpi0: bus -1 (PEX0)
acpiprt3 at acpi0: bus 1 (VRP2)
acpiprt4 at acpi0: bus 7 (VRP1)
acpiprt5 at acpi0: bus 2 (PEX1)
acpiprt6 at acpi0: bus 3 (PEX6)
acpiprt7 at acpi0: bus 4 (PEX7)
acpiprt8 at acpi0: bus 5 (BR28)
acpicpu at acpi0 not configured
"PNP0A08" at acpi0 not configured
"PNP0003" at acpi0 not configured
acpicmos0 at acpi0
"IPI0001" at acpi0 not configured
"PNP0C33" at acpi0 not configured
pci0 at mainbus0 bus 0
0:31:5: mem address conflict 0xfe010000/0x1000
pchb0 at pci0 dev 0 function 0 "Intel C3000 Host" rev 0x11
pchb1 at pci0 dev 4 function 0 "Intel C3000 GLREG" rev 0x11
"Intel C3000 RCEC" rev 0x11 at pci0 dev 5 function 0 not configured
ppb0 at pci0 dev 6 function 0 "Intel C3000 PCIE" rev 0x11
pci1 at ppb0 bus 1
"Intel C3000 QAT" rev 0x11 at pci1 dev 0 function 0 not configured
ppb1 at pci0 dev 10 function 0 "Intel C3000 PCIE" rev 0x11: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 16 function 0 "Intel C3000 PCIE" rev 0x11
pci3 at ppb2 bus 3
ppb3 at pci0 dev 17 function 0 "Intel C3000 PCIE" rev 0x11
pci4 at ppb3 bus 4
ppb4 at pci4 dev 0 function 0 "ASPEED Technology AST1150 PCI" rev 0x03
pci5 at ppb4 bus 5
"ASPEED Technology AST2000" rev 0x30 at pci5 dev 0 function 0 not configured
"Intel C3000 SMBus" rev 0x11 at pci0 dev 18 function 0 not configured
ahci0 at pci0 dev 19 function 0 "Intel C3000 AHCI" rev 0x11: msi, AHCI 1.3.1
scsibus0 at ahci0: 32 targets
ahci1 at pci0 dev 20 function 0 "Intel C3000 AHCI" rev 0x11: msi, AHCI 1.3.1
scsibus1 at ahci1: 32 targets
xhci0 at pci0 dev 21 function 0 "Intel C3000 xHCI" rev 0x11: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
ppb5 at pci0 dev 22 function 0 "Intel C3000 PCIE" rev 0x11
pci6 at ppb5 bus 6
"Intel X553 SGMII" rev 0x11 at pci6 dev 0 function 0 not configured
"Intel X553 SGMII" rev 0x11 at pci6 dev 0 function 1 not configured
ppb6 at pci0 dev 23 function 0 "Intel C3000 PCIE" rev 0x11
pci7 at ppb6 bus 7
"Intel X553 SGMII" rev 0x11 at pci7 dev 0 function 0 not configured
"Intel X553 SGMII" rev 0x11 at pci7 dev 0 function 1 not configured
"Intel C3000 ME HECI" rev 0x11 at pci0 dev 24 function 0 not configured
"Intel C3000 LPC" rev 0x11 at pci0 dev 31 function 0 not configured
"Intel C3000 PMC" rev 0x11 at pci0 dev 31 function 2 not configured
"Intel C3000 SMBus" rev 0x11 at pci0 dev 31 function 4 not configured
"Intel C3000 SPI" rev 0x11 at pci0 dev 31 function 5 not configured
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
efifb0 at mainbus0: 1920x1200, 32bpp
wsdisplay at efifb0 not configured
uhidev0 at uhub0 port 1 configuration 1 interface 0 "Logitech USB Multimedia
Keyboard" rev 1.10/0.70 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0 mux 1
uhidev1 at uhub0 port 1 configuration 1 interface 1 "Logitech USB Multimedia
Keyboard" rev 1.10/0.70 addr 2
uhidev1: iclass 3/0, 2 report ids
uhid at uhidev1 reportid 1 not configured
uhid at uhidev1 reportid 2 not configured
uhub1 at uhub0 port 3 configuration 1 interface 0 "vendor 0x05e3 USB2.0 Hub"
rev 2.00/32.98 addr 3
uhub2 at uhub1 port 1 configuration 1 interface 0 "vendor 0x0557 product
0x7000" rev 2.00/0.00 addr 4
uhidev2 at uhub2 port 1 configuration 1 interface 0 "vendor 0x0557 product
0x2419" rev 1.10/1.00 addr 5
uhidev2: iclass 3/1
ukbd1 at uhidev2
wskbd1 at ukbd1 mux 1
uhidev3 at uhub2 port 1 configuration 1 interface 1 "vendor 0x0557 product
0x2419" rev 1.10/1.00 addr 5
uhidev3: iclass 3/1
uhid at uhidev3 not configured
uhub3 at uhub1 port 2 configuration 1 interface 0 "vendor 0x05e3 USB2.0 Hub"
rev 2.00/32.98 addr 6
umass0 at uhub0 port 4 configuration 1 interface 0 "TrekStor USB-Stick CS
TrekStor USB-Stick CS" rev 2.00/0.35 addr 7
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd0 at scsibus2 targ 1 lun 0: <TrekStor, TrekStor USB CS, > SCSI2 0/direct
removable serial.1e680035000000003923
sd0: 7450MB, 512 bytes/sector, 15257600 sectors
softraid0 at root
scsibus3 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
erase ^?, werase ^W, kill ^U, intr ^C, status ^T
Welcome to the OpenBSD/amd64 6.5 installation program.
(I)nstall, (U)pgrade, (A)utoinstall or (S)hell?
Regards,
Richard
